LESSON 2 - G9 Occupational Health and Safety Procedures
LESSON 2 - G9 Occupational Health and Safety Procedures
Accident reports
Forms are used to give specific details with regards to the
accidents happened in the laboratory during experiments.
Accident reports contain the following details:
Name of the person injured
Date and time of the accident
Type of injury
First aid given
Action taken to prevent further accidents
A hazard is a situation in the workplace that has the
potential to harm the health and safety of people or to damage
plant and equipment.
The situation could involve a task, chemical or
equipment used.
Hazard management is a continuous process that can be
used to improve the health and safety of all workplaces.
One of the most common physical hazards involving
computer technicians is cables running across the floor.
To minimize accident:
1. You may use Danger sign similar to those "wet
floor" signs used by cleaning services, or
2. Use, Gaffers tape - it is a heavy tape with strong
adhesive to stick to the floor.
3. wide variety of cable organizing devices like cable
ties, cable wraps, and cable raceways which can be used to
run cable safely along the wall or ceiling.
Other common physical hazards include leaving tools on
top of ladders and placing electronic equipment in
precarious positions or on support that is not sturdy enough or
not designed for holding electronic equipment.
When working on electronic equipment always be alert to
any possibility of being hurt by moving parts, hot components,
or sharp edges.
When working on electronic equipment, ask yourself "Is
there any way this equipment could hurt me?”
Examples:
1. You might stick your hand in a printer and suddenly the paper
feed arm moves, feeding not only paper through the printer, but
a piece of your finger too.
2. You might move your hand past a computer chassis and lose a
chunk of flesh because it is razor sharp.
Wide array of chemicals used with electronic equipment.
- display cleaning chemicals
- keyboard cleaning chemicals
- compressed gas dirt and dust removers, and
- many other cleaning solvents.
Some of these chemicals can be harmful if accidentally
swallowed, get on bare skin, or get in eyes.
So, before using any chemicals for electronic equipment
always read the warnings and instructions on the label.
Also be very careful when dealing with inkjet printer
cartridges, or laser printer toner cartridges. Ink and toner can
stain skin, clothing and carpet.
Inside computers and electronic equipment, there
is a range of voltages from 3.3 volts to 25 volts, most of
which are harmless. But at the power supply, you will
find line voltage, which is a lethal 220 volts.
The workplace should have safety guidelines to follow to:
- Protect people from injury
- Protect equipment from damage
- Protect the environment from contamination
If the workplace hazard appears to be dangerous to staff
and clients and professional assistance is required:
A. Call the supervisor or manager and advise them of the
problem and the urgency of the matter.
B. Depending on the risk it may be called as an
evacuation.
C. Follow the evacuation procedure.
D. The supervisor or manager will call in the fire brigade
or specialized personnel who will deal with the
spill.
Know the location of fire
extinguishers, how to use them
and which to use for electrical
fires and for combustible fires.
Find an escape route in case a
fire gets out of control.
Know how to contact emergency
services quickly
Keep the workspace clean.
Keep most solvents in a separate
area.
Each work area has a designated fire warden, who in the event
of a fire will take charge. They are recognized by the wearing of
a red hard hat.
If you find fire
Assess the danger prior to doing anything.
If it is safe to move assist anyone in the vicinity of the fire away from
danger.
If it is possible close the door to the fire area.
Call for assistance. Verbally call FIRE, FIRE, in a loud and clear
voice.
Break the glass section of the fire alert call point.
Call to the switch; ensure you know where the fire is, any other
details that may be of assistance to the fire brigade. Details could be
size of the fire, cause or type of fire, any people hurt or trapped, has
anyone tried to put it out.
If safe to do so, attack the fire with the correct extinguisher or fire
hose.
If the designated fire officer is not present, someone
quickly needs to take responsibility and:
1. Locate the source of the fire.
2. Locate any people.
3. Remove all people from the building.
4. Once outside do a head count?
5. Notify the authorities.
PERSONAL SAFETIES
1. SORT - Remove all items not needed for current production
operations.
2. SET IN ORDER - Arrange needed items so that they are
easy to use.
3. SHINE - Keep everything, every day, swept and clean.
4. STANDARDIZE - Integrates Sort, Set in Order, and
Shine into a unified whole.
5. SELF-DISCPLINE - Making a habit of properly
maintaining correct procedures
1. Always ground or discharge yourself before touching any
part of the computer.
2. Do not work alone so that there is someone who can
take care of you in case of accident or emergency.
3, Be careful with the tools that may cause short circuit.
4. Always pull the cable connector on the handle and not
hold on the cable itself.
5. Use only rubber shoes when standing on the ground or
in a concrete floor.
6. Make sure that the pins are properly aligned when
connecting a cable connector.
7. Always power off and unplug the computer before
working on it.
8. Take away any liquid such as mineral water or soft
drinks near your working area or near computers.
9. Contingency measures during workplace accidents, fire,
and other emergencies are recognized.
10. Personal protective equipment is correctly used in
accordance with organization procedures and
practice.
11. Hazard/risks in the workplace and their corresponding
indicators are identified to minimize or eliminate
risk to co‐workers, workplace, and environment.
12. Take necessary precautions to protect the
component of the computer from damaged
caused by Electrostatic Discharge (ESD).
13. Hold the components by edges and do not touch
the IC’s.
14. Read and follow instructions on the manual
carefully.
15. Do not use excessive force if things do not quite
slip into place.
Computer equipment can be dangerous, and you or others can be
injured or even killed if you don’t follow proper safety guidelines
when working along with PC’s.
Some precautionary measures to take before working with any
computer equipment:
Wear shoes with non-conductive rubber soles to help
reduce the chance of being shocked or seriously injured in
an electrical accident.
Do not work on components that are plugged into their
power source.
Do not remove expansion cards from a computer when it is
turned on.
Remove jewelries when working inside any computer related
equipment.
Be sure not to mix electronic components and water.
Personal Protective Equipment - refers to protective
clothing, helmets, goggles, or other gear designed to
protect the wearer's body or clothing from injury by
electrical hazards, heat, chemicals, and infection, for job-
related occupational safety and health purposes.
- PPE can also be used to protect the working
environment from pesticide application, pollution or
infection from the worker (for example in a microchip
factory).
- It is important that students and teachers during their
laboratory period should be required to use personal
protective equipment. Some of these are: