Sri Venkateswara College of Engineering
Sri Venkateswara College of Engineering
ENGINEERING
Department of Mechanical Engineering
Zeroth Review Presentation
Presented by
K JASWANTH REDDY 16BF1A0350
A L CHARAN KUMAR REDDY 17BF5A0301
CH JAYASAI 17BF5A0313
B HEMASEKHAR 16BF1A0315
CONTENTS
Abstract
Introduction
Plan of action
Experimental Procedure
Scope of Future work
References
ABSTRACT
3D printing is a form of additive manufacturing technology where a three dimensional object is created by laying
down successive layers of material. It is also known as rapid prototyping, is a mechanized method whereby 3D
objects are quickly made on a reasonably sized machine connected to a computer containing blueprints for the
object.
By this project we are able to model and print the components of a model of an automobile unit and assemble them
such that it runs with the help of a battery. This gives a clear cut idea of modeling the small day to day life
components and make use of them in a reliable manner.
The modeling stage consists of shaping individual objects that are later used in the scene. There are a number of
modeling techniques, including:
• Constructive solid geometry
• Implicit surfaces
• Subdivision surfaces
Modeling can be performed by means of a dedicated program, or an application component. In some cases, there is
no strict distinction between these phases; in such cases modeling is just part of the scene creation process.
INTRODUCTION
3D printing also known as additive manufacturing turns digital 3D models into solid objects
by building them up in layers. The technology was first invented in the 1980s, and since
that time has been used for rapid prototyping (RP). However, in the last few years, 3D
printing has additionally started to evolve into a next-generation manufacturing technology
that has the potential to allow the local, on-demand production of final products.