Scribd Logo
Upload

Welcome to Scribd!

  • Curtain Wall Stick System

    Uploaded by

    Anonymous PWdOlxY
    439 views15 pages
    The document discusses curtain wall stick systems. It defines a stick curtain wall system as a non-load bearing exterior wall suspended in front of structural framing. Stick refers to precut mullions and transoms that are transported and installed individually. Key advantages are wide availability, suitability for complex facades, and quicker factory production. Components include horizontal and vertical mullions, anchors, and hardware. Differences between 50mm and 60mm systems and examples of add-on, passive house, and SG design systems are provided.

    Original Description:

    curtain wall

    Original Title

    CURTAIN WALL STICK SYSTEM

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document discusses curtain wall stick systems. It defines a stick curtain wall system as a non-load bearing exterior wall suspended in front of structural framing. Stick refers to precut mullions and transoms that are transported and installed individually. Key advantages are wide availability, suitability for complex facades, and quicker factory production. Components include horizontal and vertical mullions, anchors, and hardware. Differences between 50mm and 60mm systems and examples of add-on, passive house, and SG design systems are provided.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pptx, pdf, or txt
    439 views15 pages

    Curtain Wall Stick System

    Uploaded by

    Anonymous PWdOlxY
    The document discusses curtain wall stick systems. It defines a stick curtain wall system as a non-load bearing exterior wall suspended in front of structural framing. Stick refers to precut mullions and transoms that are transported and installed individually. Key advantages are wide availability, suitability for complex facades, and quicker factory production. Components include horizontal and vertical mullions, anchors, and hardware. Differences between 50mm and 60mm systems and examples of add-on, passive house, and SG design systems are provided.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pptx, pdf, or txt
    of 15

    CURTAIN WALL STICK SYSTEM

    ABCM-GROUP 6
    INTRODUCTION
    THE CURTAIN WALL COMPRISES A COMPLETE CLADDING
    AND EXTERIOR WALL SYSTEM WITH THE EXCEPTION OF
    THE INDOOR FINISHES.
    • IT IS GENERALLY ASSEMBLED FROM ALUMINUM
    FRAMES, VISION GLASS AND SPANDREL GLASS (OR
    METAL OR STONE) PANELS TO ENCLOSE A BUILDING
    FROM GRADE TO THE ROOF.
    • IT IS AVAILABLE IN THREE SYSTEM TYPES TO INCLUDE THE
    STICK BUILT SYSTEM, THE UNITIZED (OR PANEL) SYSTEM
    AND THE STRUCTURAL GLAZING SYSTEM (CAPLESS
    VERTICAL JOINTS).
    • THE CURTAIN WALL IS THE MOST AIRTIGHT AND
    WEATHER RESISTANT CLADDING AND EXTERIOR WALL
    SYSTEM AVAILABLE
    WHAT IS CURTAIN STICK SYSTEM?

    • STICK CURTAIN WALL SYSTEM MAY BE DEFINED AS NON-LOAD BEARING WALLS USUALLY
    SUSPENDED IN FRONT OF STRUCTURAL STEEL OR CONCRETE FRAMING.
    • THE TERM STICK REFERS TO THE FACTORY CUT MULLIONS AND TRANSOMS WHICH ARE
    TRANSPORTED TO SITE AS LOOSE BARS AND STICK.
    • THE OLDEST CURTAIN WALL TYPE IS THE STICK BUILT SYSTEM.
    • THE STICK BUILT SYSTEM IS INSTALLED BY HANGING THE VERTICAL MULLION FROM A FLOOR
    EDGE WITH A STEEL ANGLE, WHILE SLIDING THE LOWER END OF THE VERTICAL MULLION
    OVER AN INSERT ANCHOR IN THE VERTICAL MULLION ATTACHED BELOW.
    ADVANTAGES
    WIDELY AVAILABILITY OF SYSTEM CHOICE ON THE MARKET AT
    VERY COMPETITVE PRICES AND SHORT LED IN TIME
    SUITED FOR ANGULAR OR COMPLEX FACADES
    SLIGHLINES ARE SLIMMER THAN UNITIZED CURTAIN WALL
    QUICKER PRODUCTION PROCESSES IN THE FACTORY
    COMPONENTS
    • HORIZONTAL ELEMENT-MULLIONS
    • VERICAL ELEMENT-RAILS OR SOMETIMES MULLIONS
    • STEEL OR ALUMINIUM ANCHORS
    • IN ADDITION
    , THERE ARE VARIOUS HARDWARE COMPONENTS TO
    INCLUDE
    ANCHORS, ALUMINUM CONNECTORS, SETTING BLOCKS,
    CORNER BLOCKS, PRESSURE PLATES, CAPS, GASKETS
    DIFFERENCE
    SYSTEM WIDTH 60MM CURTAIN WALL SYSTEM WIDTH 50MM CURTAIN WALL

    System width: 60 mm
    Profile depth: 70 mm to 170 mm
    Infill thickness: 3 mm to 51 mm
    Glass weight: up to 5.6 kN System width: 50 mm
    Profile depth: 50 mm to 260 mm
    Infill thickness: 3 mm to 63 mm
    Glass weight: up to 5.6 kN
    ADD ON CURTAIN WALL PASSIVE HOUSE CURTAIN WALL

    System width: 50 mm System width: 50 mm


    Supporting frames: from 50 mm Basic system: WICTEC 50
    width Structural profiles: Wood profiles Steel tubes Open Infill thickness: 45 mm to 51 mm
    Glass weight: up to 5.6 kN
    steel profiles
    SG DESIGN

    System width: 50 mm
    External profile width: 43 mm / 51 mm
    LIVE CASE STUDY- MOKSH PLAZA,BORIVALI
    VISION GLASS

    Vision glass (which may be double or triple glazed,


    may include low-e coatings, reflective coatings and
    so on).Spandrel (non-vision) glass
    THANK YOU
    • AVIRAL GOYAL 23
    • YASH JAIN 29
    • VAISHNAVI KUSHTE 40
    • VIRAJ PADHIYAR 50
    • MANASVI SHAH 66
    • KASHISH SINGH 72
    • KSHIPRA TULSYAN 77
    • PRAJAKTA THAKUR 81
    • DHRUMIL SHETH 82

    You might also like