This seminar presentation summarizes I3S (Idle Start Stop System) technology. I3S automatically shuts off the engine when idling to reduce fuel consumption and turns it back on when needed. It was first developed in 1964 and can improve fuel economy by 10%. I3S uses a battery, starter, and ECU to stop the engine when speed is 0 km/hr and automatically restart it when the clutch is pressed. Adopting I3S can reduce fuel consumption and CO2 emissions by 5-10% in city driving. The presenter concludes that over 50% of new vehicles after 2020 will have I3S as a standard feature to help reduce emissions and conserve fuel.
Original Description:
I3s is the ideal start stop system which is very prevalent nowadays.
This seminar presentation summarizes I3S (Idle Start Stop System) technology. I3S automatically shuts off the engine when idling to reduce fuel consumption and turns it back on when needed. It was first developed in 1964 and can improve fuel economy by 10%. I3S uses a battery, starter, and ECU to stop the engine when speed is 0 km/hr and automatically restart it when the clutch is pressed. Adopting I3S can reduce fuel consumption and CO2 emissions by 5-10% in city driving. The presenter concludes that over 50% of new vehicles after 2020 will have I3S as a standard feature to help reduce emissions and conserve fuel.
This seminar presentation summarizes I3S (Idle Start Stop System) technology. I3S automatically shuts off the engine when idling to reduce fuel consumption and turns it back on when needed. It was first developed in 1964 and can improve fuel economy by 10%. I3S uses a battery, starter, and ECU to stop the engine when speed is 0 km/hr and automatically restart it when the clutch is pressed. Adopting I3S can reduce fuel consumption and CO2 emissions by 5-10% in city driving. The presenter concludes that over 50% of new vehicles after 2020 will have I3S as a standard feature to help reduce emissions and conserve fuel.
SEMINAR PRESENTATION ON “I3S TECHNOLOGY” BY XYZ (2255WH876) UNDER THE GUIDANCEOF ABC
DEPARTMENT OF MECHANICAL ENGINEERING
Introduction I3s means Idle Start Stop System It is a green technology that automatically shuts engine when idling and turns it on when needed. It reduces the fuel consumption effectively and efficiently. History It was first developed in 1964 by Toyota. Testing of it shows about 10% improvement in fuel economy. Four wheelers having this technology were the Fiat Regma “ES” Volkswagen Polo “Formel E”. Firstly in Hero motorbike in 2003. Two wheeler having this technology were Hero splendor i-smart, new passion pro. Why there is need of I3S? Less milege of vehicles. More CO2 emmision causes pollution. More fuel consumption. More engine noise and vibration when in standstill condition. More usage of fuel during idle running of engine. Working in 2 wheeler It uses battery, electric generator, electric starter, Electronic Control Unit (ECU), speed sensor. It uses regenerative braking, where rotational energy of wheel turns the electric generator and generates electricity. When speed is 0km/Hr, sensor senses and sends the signal to ECU then 3 sec timer get started and after 3 sec ECU shuts the engine. With the help of ECU it uses generated energy to start the engine when clutch is pressed. Block diagram of I3S technology Conditions to stop the engine automatically Vehicle speed is zero I3s feature should be on.
Conditions to start the engine automatically
Engine speed is zero. Vehice speed is zero. I3S feature should be on. Clutch should be pressed fully. Advantages of I3S Technology Fuel consumption is reduced by up to 5-10% in city driving. CO2 emissions are reduced up to 7-8%. Engine restarts within 350 milliseconds and in complete silence. Implementation cost is not very high. Engines starts and stops automatically. Eliminates engine noise and vibration. Application Hero splendor i-smart bike. New Passion pro. Mahindra has introduced the stop start based micro hybrid system. Fiat introduced this system in Inflate 500. Volkswagen Polo, Golf and Passat. Many BMW cars. Conclusion More than 50% of the newly registered vehicles will have start-stop as standard technology after 2020. This system raises the alarm to the society to cut CO2 emission, save fuel and preserve the nature. This is very cost effective system useful in two wheelers to save fuel, CO2 emission, nature and global warming. Thank You!