01 - Atm
01 - Atm
Cash Machine (New Zealand, UK) Hole-In-The-Wall (New Zealand, UK) Cash point (New Zealand, UK) Computerized telecommunications device. Provides a financial institution's customers a secure method of performing financial transactions in a public space without the need for a human clerk or bank teller.
A mechanical cash dispenser developed and built by Luther George Simjian installed 1939 in New York by the City Bank of New York De La Rue developed the first electronic ATM, which was installed first in Enfield Town in North London on June 27, 1967 by Barclays Bank. The first person to use the machine was Reg Varney of "On the Buses" fame, a British Television programme from the 1960s The first ATMs accepted only a single-use token or voucher, which was retained by the machine
idea of a personal identification number (PIN) stored on a physical card being compared with the PIN entered when retrieving the money was developed by the British engineer James Goodfellow in 1965 ATMs first came into wide use during the early- to mid-1980s
The
The customer identifies him or herself by inserting a plastic card with a magnetic stripe or a plastic smartcard with a chip. It contains his or her card number and some security information, such as an expiration date or CVC (CVV). The customer then verifies their identity by entering a pass code, often referred to as a PIN (Personal Identification Number) of four or more digits. Upon successful entry of the PIN, the customer may perform a transaction. After the transaction is complete, a transaction record is printed, usually consisting of the action taken, date and time, location, any applicable fees, and available balance.
If the number is entered incorrectly several times in a row (usually three attempts per card insertion), some ATMs will attempt to retain the card as a security precaution to prevent an unauthorized user from discovering the PIN by guesswork. Captured cards are often destroyed if the ATM owner is not the card issuing bank, as noncustomer's identities cannot be reliably confirmed. In some cases, a transaction may be performed at the ATM that allows the customer's PIN to be changed securely.
The top three worldwide manufacturers of ATM machinery and their ATM brands are
Diebold Opteva series NCR Personas series Wincor Nixdorf ProCash series
There are two main types of ATMs that have developed over time: Mono-function devices, which only one type of mechanism for financial transactions is present (such as cash dispensing or statement printing)
Multi-function devices, which incorporate multiple mechanisms to perform multiple services (such as accepting deposits, dispensing cash, printing statements, etc.) all within a single footprint.
ATMs are placed not only near or inside the premises of banks, but also in locations such as shopping centres/malls, grocery stores, gas stations and restaurants. These represent two types of ATM installations
On premise ATMs are typically more advanced, mutli-function machines that complement an actual bank branch's capabilities and thus more expensive. Off premise machines are deployed by financial institutions and also ISOs (or Independent Sales Organizations) where there is usually just a straight need for cash, so they typically are the cheaper mono-function devices.
In Canada, when an ATM is not operated by a financial institution it is known as a "White Label ATM".
Logical connections
Most ATMs are connected to interbank networks This is a convenience, especially for people who are travelling: it is possible to make withdrawals in places where one's bank has no branches, and even to withdraw local currency in a foreign country. Some examples of interbank networks include PLUS, Cirrus, South Africa's SASWITCH, Hong Kong's JETCO, Canada's Interac, the Philippines' Expressnet and Nigeria's Interswitch network. ATMs rely on authorization of a transaction by the card issuer or other authorizing institution via the communications network. This is often performed through an ISO 8583 messaging system. Many banks charge fees for the use of their ATMs
Physical connections
ATMs typically connect directly to their ATM Transaction Processor via a dial-up modem over a telephone line or directly via a leased line. Leased lines are preferable to POTS lines because they require less time to establish a connection. Leased lines may be comparatively expensive to operate versus a POTS line, meaning less-trafficked machines will usually rely on a dial-up modem. Common lower-level layer communication protocols used by ATMs to communicate back to the Bank include SNA over SDLC, TC500 over Async, X.25, and TCP/IP over Ethernet.
Estimates developed by ATMIA place the number of ATMs in use at over 1.5 million as of August 2006 Industry views of ATM usage around the world generally divide the world into seven regions based on
the penetration rates usage statistics features deployed.
Four regions (USA, Canada, Europe, and Japan) have high numbers of ATMs per million people and generally slowing growth rates. Despite the large number of ATMs, there is additional demand for machines in the Asia/Pacific area as well as in Latin America. ATMs have yet to reach high numbers in the Near East/Africa. The world's most northernly installed ATM ---- at Longyearbyen, Svalbard, Norway. The world's most southernly installed ATM ---- at McMurdo Station, Antarctica. While ATMs are ubiquitous on modern cruise ships, ATMs can also be found on certain US Navy ships
CPU Magnetic and/or Chip card reader (to identify the customer) PIN Pad (similar in layout to a Touch tone or Calculator keypad), often manufactured as part of a secure enclosure. Secure crypto processor Display Function key buttons or a Touch screen Record Printer Vault Housing
The vault of an ATM is where items of value are kept. Scrip cash dispensers do not incorporate a vault. Mechanisms found inside the vault may include:
Dispensing mechanism (to provide cash or other items of value) Deposit mechanism (to take items of value from the customer) Security sensors (Magnetic, Thermal, Seismic) Locks (to ensure controlled access to the contents of the vault) Cost Weight Regulatory requirements ATM type Operator risk avoidance practices Internal volume requirements.
Industry standard vault configurations include Underwriters Laboratories UL-291 "Business Hours" and Level 1 Safes, RAL 626/3, TL-30 derivatives, and CEN EN 1143-1:2005 - CEN III/VdS and CEN IV/LGAI/VdS. ATM manufacturers recommend that vaults be attached to the floor to prevent theft
Standard commercial "off-the-shelf" operating systems and programming environments can be used inside of ATMs. Typical platforms used in ATM development include RMX, OS/2, and Microsoft operating systems (such as Windows 98, Windows NT, Windows 2000, Windows XP, or Windows XP Embedded). Sun Microsystem's Java may also be used in these environments. Linux is also finding some reception in the ATM marketplace. An example of this is Banrisul, the largest bank in the south of Brazil, which has replaced the MSDOS operating systems in its ATMs with Linux.
These protocols provide emulation of older generations of hardware on newer platforms with incremental extensions made over time to address new capabilities. WOSA/XFS, now known as CEN XFS (or simply XFS), provides a common API for accessing and manipulating the various devices of an ATM. J/XFS is a Java implementation of the CEN XFS API.
The perceived benefit of XFS is similar to the Java's "Write once, run anywhere" mantra. But different ATM hardware vendors have different interpretations of the XFS standard. The result of these differences in interpretation means that ATM applications typically use a middleware to even out the differences between various platforms. Notable XFS middleware platforms are
Diebold Agilis, KAL Kalignite, NCR Corporation Aptra Edge Phoenix Interactive VISTAatm Wincor Nixdorf Protopas
Physical
Early ATM security focused on making the ATMs invulnerable to physical attack; they were effectively safes with dispenser mechanisms. Modern ATM physical security, per other modern money-handling security, concentrates on denying the use of the money inside the machine to a thief, by means of techniques such as dye markers and smoke canisters
Various ATM manufacturers have put in place countermeasures to protect the equipment they manufacture from these threats. patterns, iris, and facial recognition technologies.
Alternate methods to verify cardholder identities are finger and palm vein
to prevent tampering with the mechanisms when they are not in use.
Alarm sensors are placed inside the ATM and in ATM servicing areas to alert
have called for the adoption of an emergency PIN system for ATMs, where the user is able to send a silent alarm in response to a threat.
ATMs include many functions which are not directly related to the management of one's own bank account, such as:
Deposit currency recognition, acceptance, and recycling Paying routine bills, fees, and taxes (utilities, phone bills, social security, legal fees, taxes, etc.) Printing bank statements Updating passbooks Loading monetary value into pre-paid cards (cell phones, tolls, multi purpose stored value cards, etc.) Ticket purchases (train, concert, etc.). Purchasing postal stamps Lottery ticket purchases Games and promotional features Donations to charities Purchase shopping mall gift certificates
ATMs can also act as an advertising channel for companies to advertise their own products or third-party products and services
Manufactures have demonstrated and have deployed several different technologies on ATMs that have not yet reached worldwide acceptance, such as:
Biometrics, where authorization of transactions is based on the scanning of a customer's fingerprint, iris, face, etc. Biometrics on ATMs can be found in Asia Cheque/Cash Acceptance, where the ATM accepts and recognize cheques and/or currency without using envelopes Expected to grow in importance in the US through Check 21 legislation. Bar code scanning On-demand printing of "items of value" (such as movie tickets, Travellers Cheques, etc.) Dispensing additional media (such as phone cards) Co-ordination of ATMs with mobile phones Customer-specific advertising Integration with non-banking equipment
Before an ATM is placed in a public place, it typically has undergone extensive testing with both test money and the backend computer systems that allow it to perform transactions. Industry benchmarks produces 98.25% customer availability for ATMs and up to 99.999% availability for host systems. If ATMs do go out of service, customers could be left without the ability to make transactions until the beginning of their bank's next time of opening hours. Some machines give out money without debiting the account, or give out higher value notes as a result of incorrect denomination of banknote being loaded in the money cassettes. Errors that can occur may be
mechanical (such as card transport mechanisms; keypads; hard disk failures) software (such as operating system; device driver; application) communications purely down to operator error.
Some ATMs print each transaction to a roll paper journal that is stored inside the ATM. This allows both the users of the ATMs and the related financial institutions to settle things based on the records in the journal in case there is a dispute. In some cases, transactions are posted to an electronic journal to remove the cost of supplying journal paper to the ATM and for more convenient searching of data. Bill validation technology can be used by ATM providers to help ensure the authenticity of the cash before it is stocked in an ATM. ATMs that have cash recycling capabilities include this capability.
Fraud against ATMs takes several forms such as: Fake ATMs
The first known instance of a fake ATM was installed at a shopping mall in
By modifying the inner workings of a Fujitsu model 7020 ATM, a criminal gang
known as The Bucklands Boys were able to steal information from cards inserted into the machine by customers.
Operational fraud
Bank fraud could occur at ATMs whereby the bank accidentally stocks the ATM
with bills in the wrong denomination, therefore giving the customer more money than should be dispensed. Bank's cash dispensing network is unable to access databases that contain account information . cash up to a certain amount that may be less than their usual daily withdrawal limit, but may still exceed the amount of available money in their account, which could result in fraud.
ATM behaviour can change during what is called "stand-in" time, where the
the simplest is to simply steal a customer's card In this scenario, the user's PIN is observed by someone watching as they use the machine; they are then mugged for their card by a second person. Another method is to trap the card inside of the ATM's card reader with a device often referred to as an Lebanese loop. When the customer gets frustrated by not getting the card back and walks away from the machine, the criminal is able to remove the card and withdraw cash from the customer's account. The Lebanese Loop could also be combined with the Droplet method of stealing the PIN, where small drops of oil are placed on the PIN pad keys. After a customer used the ATM, one can see which keys were pressed, which makes it easier to guess the entered pin. A simple counter measure to this attack is to wipe the PIN pad before or after each use. Another simple form of fraud involves attempting to get the customer's bank to issue a new card and stealing it from their mail
Cloning
High definition video cameras are pointed at ATMs from a considerable distance, and the card numbers, expiry dates, etc. are recorded from the embossed detail on the ATM cards along with video footage of the PINs being entered. After getting all the information from the videotapes, one was able to produce clone cards which not only allowed him to withdraw the full daily limit for each account, but also allowed him to sidestep withdrawal limits by using multiple copied cards. Newer high-tech modus operandi involves the installation of a magnetic card reader over the real ATM's card slot and the use of a wireless surveillance camera or a modified digital camera to observe the user's PIN. Card data is then cloned onto a second card and the criminal attempts a standard cash withdrawal.
Countermeasures against card cloning have been developed by the banking industry
by the use of smart cards which cannot easily be copied or spoofed by un-authenticated
devices, and
Older chip-card security systems include the French Carte Bleue, Visa Cash, Mondex, Blue from American Express and EMV '96 or EMV 3.11. The most actively developed form of smart card security in the industry today is known as EMV 2000 or EMV 4.x. EMV is widely used in the UK (Chip and PIN) and parts of Europe, but when it is not available in a specific area, ATMs must fallback to using the easy to copy magnetic stripe to perform transactions.
1.
Talking ATM
It provides audible instructions so that persons who cannot read an ATM screen can independently use the machine. All audible information is delivered privately through a standard headphone jack on the face of the machine. Information is delivered to the customer either through pre-recorded sound files or via text-to-speech speech synthesis It share many of the same components as an ATM (including a vault), but only dispenses items relating to postage
2.
Postal kiosk
3.
4.