Basic COSH 2018
Basic COSH 2018
CONTROL OF NOISE
> Engineering Control
- Purchase new equipment
- Preventive maintenance
- Isolation/damping
> Administrative Control
- Job rotations/Increased breaks
> PPE
- Ear Plugs/ Ear muffs
Heat Stress – when the body’s temperature
goes higher than 37.5°C ± 0.5 °C.
HEAT EXPOSURE
> High Temperature – Heat of the Sun
> High Humidity – Gas, Oil, Fire, Engine Heat
> Poor Ventilation
> Multiple heat sources
THERMOREGULATORY MECHANISM
> Heat is first removed from the organs
producing it (metabolic heat) to the skin by
the circulating blood to maintain a body
temperature of 37.5°C ± 0.5 °C.
ACUTE HEALTH EFFECTS OF HEAT
> Prickly heat – Immature Sweat Glands
> Heat Fatigue – Bad Mood (Water loss)
> Heat Cramps – Muscle Spasm (H2O+Salt)
> Heat Exhaustion – Fatigue, Dehydration,
Nausea, Vomiting, Diaphoresis
(Water+Salt+Electrolytes)
> Heat Stroke – Overheating, Seizure, Coma
(Failure of the Thermoregulatory System)
CONTROL OF HEAT PROBLEMS
> Engineering
- Ventilation, Water Sources
> Administrative
- Job Rotations, breaks away
> PPE
- Cotton clothes, multiple changes
Vibration – Continuous low frequency
oscillation that is more likely felt than heard,
it affects the body through direct contact.
EXPOSURE SETTINGS
> Hand held grinding tools, Jack Hammer,
Chainsaw, Heavy Equipments,
Transportations.
HEALTH EFFECTS
> Inflammation of wrist, elbow, shoulder.
> Carpal Tunnel Syndrome
>Tenosynivitis (pain in affected joints)
>Fatigue
PREVENTION and TREATMENT
> Tool redesign, Maintenance of
Equipments/Tools, Gloves and Dampers.
Illumination – Visibility of a workplace as a
result of light, the source is either natural or
artificial. It is measured by Lumens or Lux.
> Importance of Illumination – It is important
that we see what we are doing.
OSHA Standards
Activity Illumination (Lux)
Active Storage 50 (Cabinet)
Production Line 300 (Mfg)
Clerical Work 500 (Encoding)
Fine Movement Work 1000 (Inspection)
OTHER HAZARDOUS SOURCES OF ILLUMINATION
> Strobe lights, Halogen bulbs, Blue light, UV
radiation
ACUTE EFFECTS
> Eye strain, Dizziness, Headache, Neck Pains, Teary
eyes
OTHER HAZARDOUS SOURCES OF ILLUMINATION
> Strobe lights, Halogen bulbs, Blue light, UV
radiation
ACUTE EFFECTS
> Eye strain, Dizziness, Headache, Neck Pains, Teary
eyes
2. CHEMICAL HAZARD – Chemicals are very
important in daily operations, including the
life of the person. They exist as SOLID,
LIQUID and GAS.
EXPOURE SETTINGS
> Oil and Fuel, Dust, Silica and Asbestos,
Solvents, Metal Welding Fumes, Acids and
Alkalis, Lead (Organic & Organic)
ROUTES OF ENTRY INTO THE BODY
> Skin Absorption - Important “accidental” route
of entry. Health effects of chemicals on skin.
- Skin acts as a protective barrier
- Local Irritation
- Generalized reaction (Sensitization or
allergic reaction)
- Absorption and vascular dissemination
- Increase absorption with the increased
temperature and perspiration
> Ingestion
- Not widespread in the industry
- Accidental swallowing from eating in
contaminated area.
- Smoking on the job with contaminated
fingers and hands
- Ingestion of inhaled materials
> Inhalation – Most important route of industrial
chemical exposure
- Concentration in the Air
- Duration of Exposure
- Amount of Inhaled Air
> Injection – When the chemicals penetrates the
skin, going directly into the underlying tissue
EYE CONTAMINATION
Chemicals enter the blood vessels thru the tears
that drain from the eye
> Organs system of the body that are affected
- Skin, Lungs, Brain, Kidney, Liver, Blood, Heart
> General health effects
- Disorientation, Euphoria, Light Lungs
Heart
headedness, Confusion, Uncon- Kidneys
Liver
sciousness, Headache, Nausea,
Vomiting, Paralysis, Convulsion and
Death.
3. BIOLOGICAL HAZARD – are the cause of
infectious disease that can originate from
people, animals and plants.
2 CHARACTERISTICS
(1) Can reproduce
(2) are living micro-organisms
THEY ARE
> Tubercolosis, AIDS, Hepatitis A, B, C, E, Chicken
pox, URTI, Sore eyes, Sexually Transmitted
disease
4. ERGONOMIC HAZARD – a technique that bring
together several disciplines to solve problems
arising from work and the working
environment. It causes pain and fatigue from
various sources. It leads to low productivity and
output. (Mental and Physical performance)
COMPONENTS JOB
MAN
WORK
TOOL
STATION
COMPONENTS
> JOB – The task needed to achieve a result, governed
by guidelines, designed to prevent muscle
overload, it requires learning, training and skill.
> WORKSTATION – Place of deployment, where
duties are carried out, where equipment are
located, machines are the tools, 8 hrs are spent.
> TOOL – Integral part of the Man-machine system,
powerful, fast, tireless, enables man to accomplish
his job with reduced effort, an extension of man’s
body, increase man’s strength and versatility,
enables him to handle other less-structured
equipment, reduce the risk of associated hazards.
> MAN – An integral part of the Man-machine
system, intelligent, adaptive and versatile, the
basis of existence-SURVIVAL.
SIGNS OF ERGONOMIC HAZARDS
- Wearing of wristbands
- Shoulder turning
- Arm stretching
- Absenteeism, increase in clinic visit
- Intake of pain-relief medication
RISK FACTORS OF THE JOB/TASK
1. Position
- Follow the ergos-nomos position (natural posture of the
body)
- Less fatigue, less strain on tendons and ligaments
- Wrists straight(180 deg. Angle), shoulders relaxed
- Back and neck as close to their natural alignment as possible
- Elbows near the side, bent at a 90 deg. Angle to reach the
work
2. Force
- Decrease the use of force
- Use equipment that will reduce the force
- Use tools that will do work for you
3. Frequency
- Repetitive action of the same muscles – it tires the body and
produces pain
- It is more difficult to control the frequency than position and
force
- Therefore, it is more important to make it possible for
employees to work in the best position they can to reduce
the force.
CONTROL METHODS
- Engineering and Administrative Control
- PPE can not be used to address ergonomic hazard
THANK YOU