Weft Knitting Basic

KNITTING
KARTHIKA M DEV
Weft Knitting
• In weft knitting, the loops are formed across width of the
fabric , and each weft thread is fed , more or less at right
angles to the direction in which the fabric is produced.
• It is possible to knit with only one thread or cone of yarn. All
the loops in one course are produced from the single supply
and loops are formed successive order one by one.
• In this method the fabric is produced by simple up and down
movement of the needles, which is provided by the profile of a
cam system. The knitting cams are the devices which convert
the rotary machine drive into a suitable reciprocating
motion of the needles. Depending on the design of the
machine the cams are fixed, adjustable or exchangeable.
• The knitting action can be explained as follows:
1. Rest position- The needle is in the rest position with the old loop in the hook of the needle.
2. Tuck Position – the needle is raised and old loop is on the latch of the needle.
3. Clearing position – The needle is raised higher to clear the loop from the latch. The needle
reached at the top of the cam and old loop is on the stem of the needle.
4. Yarn Feeding Position – The needle is lowered with old loop new yarn is being fed to the
open hook of the needle.
5. Latch Closing position – The needle is lowered further and the old loop closes the latch
trapping the new yarn inside the hook.
6. Knock over position ( loop forming) – the needle is lowered still further and old loop slides
over the trapped new yarn inside the hook, forming a new loop by completing the knitting
cycle. Knitting cycle is completed with the new loop in the hook of the needle.
• The knitting action
1. Rest position 2. Tuck Position 3. Clearing position 4. Yarn Feeding Position
5. Latch Closing position 6. Knock over position ( loop forming)

Weft Knitting
Single Jersey or Plain fabric
• A fabric in which the knitted loops are the same sort and meshed in the same manner
• Single jersey is the simplest to knit and it can be produced either on circular or flat
machines by means of one set of needles which draw their loops to only one side of the
fabric.
• The fabric has one appearance on the face side and a different one on the reverse. The
side on which the straight parts of the stitches appear in V formation is called the face
side ( Technical Face) and the reverse side ( Technical Back ) has twin rows of opposed
semi circles.
Properties Of Single Jersey
 Simplest knit structure.
 Face side smooth and sheen.
 Back side rough and dull.
 Lighter fabric.
 Economical.
 Easily ravels at both the ends.
 Highly extensible in length and width.
 The fabric curls towards the face at the top and bottom and towards the
back at the sides.
 Laddering is very common in these fabrics.
 Knitted loops in plain knit fabrics tend to distort easily under tension
which helps to give a form fitting and comfort due to property of elastic.
Purl Fabric
 Purl fabric is produced by drawing face and
reverse loops at alternate courses, where odd
number of courses have all reverse loops and even
number of courses have all face loops.
 It can be done on either flat or circular machine.
 Several purl structures can be produced be
arranging the face and reverse loops in different
orders.
Properties Of Purl
Both sides of the fabric are similar in
appearance to the reverse side of the single
jersey fabric
Ravels from both ends
Twice the thickness of the plain jersey
Rate of production is low
Almost equal extensibility in length and width
Most suitable for children’s garments, blankets
shawls and scarf etc.
Rib Fabric
• A fabric in which both back and
face loops occur along the
course, but all the loops
contained with in any wale are
of the same types
• A rib structure implies a knitted
fabric with face and back loops
occurring in the same courses
but not in the same wale
• Rib fabric can be produced on V
– bed machine and footwear
machine.
Properties Of Rib
Double Face or Reversible fabric
Similar cord appearance in each side
Thicker and heavier fabric
Ravels only at end knitted last
Lies flat without curl
Excellent width way elasticity
Form fitting.
Interlock Fabric
 Interlock is the name given to a double faced rib based structure containing
of two rib fabrics interlocked together.
 The production of interlock fabric needs two needle beds, having long and
short needles arranged alternately on both the beds.
 Two feeders are required to knit a single repeat of interlock and also cam
systems are arranged accordingly.
Properties Of Interlock
Both sides of the fabric have an appearance like
face side of the single jersey fabric. It is a
reversible fabric as rib one.
The structure do nor curl at edges when laid flat
on surface
Horizontal and vertical stripes can be produced
by using coloured yarns
The fabric ravels only from the end knitted last
The rate of production is low.

Weft Knitting Basic

Uploaded by

Copyright:

Available Formats

Weft Knitting Basic

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Weft Knitting Basic

Uploaded by

Copyright:

Available Formats

KNITTING

5. Latch Closing position 6. Knock over position ( loop forming)

You might also like