·" ''· - ..

KRAD
NON-CYCLING
REFRIGERATED
WITH COMPRESSED AIR
DRYER
INTEGRATED
ABOUT US
KELTEC Technolab was founded in 1982 by Ed Kaiser, Sr.,
formerly an engineer of the Air Maze Corporation for 20
years. With initial production of air-oil separators, KELTEC
Technolab eventually added air-intake filters, oil filters,
coalescing filters
and synthetic compressor lubricants. KELTEC acquired
Technolab (a former division of Flair Corporation), another
air-oil separator manufacturer making the new KELTEC
Technolab the largest manufacturer and supplier of air-oil
separators
Today, in North
KELTEC America.provides their products as original
Technolab
equipment to most of the major manufacturers of air compressors
in North America.

WHY TREAT COMPRESSED AIR?

The importance of compressed air as a provider of energy for
modern industrial processes is widely known. What is often
overlooked however is the need to provide quality treatment for
this air.

In fact, the air entering the system contains moisture, in vapor

form, along with environmental contaminants, which are
concentrated during compression. When cooled, this moisture
will
will turn
turn int
into liquid water, causing extensive damage not only to
the compressed air network, but also to the finished
product. Left alone, these materials would reduce
the service life of downstream equipment and
contribute to system corrosion. Keltec refrigerated
ryers actively remove this condensate and
d
particulate contamination, and achieves extremely
ry and clean, compressed air.
d
he benefits are notable; less system down time,
Treduced maintenance costs and an improved, finish
rproduct.

HIGHLY
ENGINEERED
With a pressure drop of less than 3 psi, energy costs
re greatly reduced.
a

DESIGNED FOR
CONDITION
TROPICAL
S
K
eltec-Technolab air dryers can effectively operate
with 140 F inlet temperatures, due to their use
f R134A refrigerant across the dryer range, and
o
through the use of an over sized condenser.
 REFRIGERATED
COMPRESSED AIR DRYER

COMPACT DESIGN
Every square inch inside the dryer
is
utilized.

DIGITAL
INTERFACE
CONTROLLER,
with 8 temperature sensors,
enabling
complete system monitoring.
ALUMINUM
PLATE
HEAT
EXCHANGER
Very Low Pressure Drop (2psi)
SCROLL
Very Efficient (38 F real
pressure dew point)
COMPRESSORS
The scroll compressors used are
energy efficient and resistant to liquid
shock.

INTEGRATED
DUAL FILTER
SYSTEM
which filters the compressed air to
.01
micron
ELECTRICAL WIRES ARE
SEPARATED
FROM REFRIGERANT
SIDE There are no electrical wires inside
the refrigerant side of the dryer. The electrical
box has an external cover which has an access
from the outside of the dryers.
There is no need to open the dryer panels
to enter the electrical box.

ALL WIRES
INSERTED
INTO PLASTIC
CABLE HOLDERS
Wires connected to the electrical box
with conduits

EXTRA BALL
VALVES
Extra ball valves are brazed in to the
refrigerant circuit in
order to simplify parts
replacement, without the
chance of releasing
refrigerant gas from the
system.

PRESSURE SWITCHES
Pressure switches are put in to the electrical box
for easy access.
 REFRIGERATE COMPRESSED
D AIR DRYER

Capacit Connecti Voltage Lengt Widt Heigh Weigh Refrigera Pressu Maximu Maximu Maximu replac
y on h h t t nt gas re m m m inlet e-
MODE (acfm ) Sixe (in) (in) (in) (lb) drop working ambient TEMP ment
filter
L (psi) pressure TEMP ( ºF kit
number
(psi) ( ºF )
KRAD-10 10 1/2”NPT 115/1/60 16.26 14.29 21.92 70.54 R134a <3 230 122
) 140 ADFK1
*
KRAD-15 15 1/2”NPT 115/1/60 16.26 14.29 21.92 70.54 R134a <3 230 122 140 ADFK1
KRAD-25 25 1/2”NPT 115/1/60 16.26 14.29 21.92 70.54 R134a <3 230 122 140 ADFK1
KRAD-40 40 3/4”NPT 115/1/60 18.62 17.83 32.75 112.43 R134a <3 230 122 140 ADFK2
KRAD-60 60 3/4”NPT 115/1/60 18.62 17.83 32.75 116.84 R134a <3 230 122 140 ADFK2
KRAD-80 80 3/4”NPT 115/1/60 18.62 17.83 32.75 121.25 R134a <3 230 122 140 ADFK2
KRAD-100 100 1½”NPT 115/1/60 21.77 19.80 34.40 171.96 R134a <3 230 122 140 ADFK3
KRAD-125 125 1½”NPT 115/1/60 21.77 19.80 34.40 182.98 R134a <3 230 122 140 ADFK3
KRAD-150 150 1½”NPT 230/1/60 21.77 19.80 34.40 189.59 R134a <3 230 122 140 ADFK3
KRAD-200 200 2”NPT 230/1/60 26.69 25.51 45.55 352.74 R134a <3 230 122 140 ADFK4
KRAD-250 250 2”NPT 230/1/60 26.69 25.51 45.55 363.76 R134a <3 230 122 140 ADFK5
KRAD-350 350 2”NPT 230/1/60 37.32 28.66 53.93 485.01 R134a <3 230 122 140 ADFK5
KRAD-500 500 2”NPT 230/1/60 37.32 28.66 53.93 507.06 R134a <3 230 122 140 ADFK5
KRAD-600 600 3”NPT 460/3/60 37.32 31.41 57.48 595.24 R134a <3 230 122 140 ADFK6
KRAD-750 750 3”NPT 460/3/60 37.32 31.41 57.48 628.31 R134a <3 230 122 140 ADFK6
KRAD-1000 1000 3”NPT 460/3/60 45.78 30.63 67.91 864.21 R134a <3 230 122 140 ADFK7
KRAD-1200 1200 3”NPT 460/3/60 45.78 30.63 67.91 903.89 R134a <3 230 122 140 ADFK7
KRAD-1500 1500 4”NPT 460/3/60 55 33.34 69.68 1,084.67 R134a <3 230 122 140
KRAD-1750 1750 4”NPT 460/3/60 55 33.34 69.68 1,146.40 R134a <3 230 122 140
KRAD-2250 2250 4”NPT 460/3/60 57.75 42.40 68.11 1,534.41 R134a <3 230 122 140
KRAD-2600 2600 4”NPT 460/3/60 57.75 42.40 68.11 1,582.92 R134a <3 230 122 140
KRAD-3000 3000 6”NPT 460/3/60 86.14 41.81 75.78 1,984.16 R134a <3 230 122 140
KRAD-3500 3500 6”NPT 460/3/60 86.14 41.81 75.78 R134a <3 230 122 140
KRAD-4000 4000 6”-NPT 460/3/60 106.18 35.31 77.75 R134a <3 230 122 140
KRAD-4500 4500 8”-NPT 460/3/60 106.18 35.31 77.75 R134a <3 230 122 140
KRAD-5500 5500 8”-NPT 460/3/60 100.39 61.02 82.67 3,527.39 R134a <3 230 122 140

*ADFK replacement filter kits contain 2 filter elements, 4 seal o rings and 2 auto drains
(Weights can vary a few lb)

EASY TO ACCESS
The cooling components can be easily reached in seconds via the
removable panels.

EASY DUCTING
Condensers are located at the top for easy ducting
 o
In order to properly size your dryer to the required task, you must take int
account the specific conditions under which the dryer will be operating. FM C
ratings of Keltec-Technolab dryers assume the following “Standard Conditions” :
a. 100 psi / 7 bar operating pressure,
b. max ambient temperature 100 F / 38 C
c. max inlet temperature 100 F / 38 C

For conditions OTHER than the above, please use the provided correction factors
to properly size your dryer.

PRESSUR
Psig 50 60 75 E 100 115 125 150 175 200
Bar 3.5 4.1 5 7 7.9 8.5 10 12 14
FACTOR PRESSURE: 0.75 0.77 0.85 1.00 1.06 1.10 1.16 1.25 1.30
F1
AMBIENT TEMPERATURE FACTORS
F 60 80 90 100 105 110 115 120
C 16 26 32 38 40 43 46 49
FACTOR AMBIENT: F2 1.12 1.08 1.06 1.00 0.96 0.90 0.80 0.65

INLET TEMPERATURE FACTORS

F 85 90 95 100 110 120 130 140 150
C 29 32 35 38 43 49 54 60 65
FACTOR INLET: F3 1.20 1.14 1.08 1.00 0.75 0.60 0.50 0.45 0.35

By way of example, let’s assume that your customer requires a flow of 500 CFM, at
an operating pressure of 75 psi, with an ambient temperature of 110 F, and an inlet
temperature of 120 F.

Pressure Correction factor for 75psi is 0.85

Ambiant temperature Correction factor for 110F is 0.90
Inlet temperature correction factor for 120F is 0.60

Required dryer capacity = 500CFM / 0.85 /0.90 /0.60 = 1089CFM

We need to choose the dryer that has a capacity that is nearest to 1089 cfm. In this case,
we would chose the KRAD-1200 (1200 cfm dryer) so as to ensure that we would not
have any difficulties during the hottest portion of the year.
KELTEC Technolab guarantees that its filters
will meet or exceed the specifications and
performance of the OEM, and further, that
customers replacing OEM filters with KELTEC
Technolab filters will experience no
filter-related difficulty.

KELTEC Technolab, Inc.

2300 E. Enterprise Parkway
Twinsburg, OH 44087
U.S.A.
1-800-289-7377
(330) 425-3100
Fax (330) 425-3550
[email protected]
www.keltecinc.com
 REFRIGERAT AIR
ED DRYER
price list

Model / size price (US$)

KRAD-10 $575.00
KRAD-15 575.00
KRAD-25 575.00
KRAD-40 791.00
KRAD-60 863.00
KRAD-80 1006.00
KRAD-100 1222.00
KRAD-125 1509.00
KRAD-150 1581.00
KRAD-200 2300.00
KRAD-250 2875.00
KRAD-350 4025.00
KRAD-500 5175.00
KRAD-600 5750.00
KRAD-750 7188.00
KRAD-1000 8338.00
KRAD-1200 10422.00
KELTEC Technolab, Inc.
KRAD-1500 11500.00
2300 E. Enterprise Parkway KRAD-1750 12219.00
Twinsburg, OH 44087 KRAD-2250 13656.00
U.S.A. KRAD-2600 16531.00
1-800-289-7377 KRAD-3000 18688.00
(330) 425-3100 KRAD-3500 21562.00
Fax (330) 425-3550 KRAD-4000 24437.00
KRAD-4500 28031.00
[email protected]
KRAD-5500 32343.00
www.keltecinc.com