All agricultural and fisheries machinery assemblers,

manufacturers, importers, suppliers, distributors and dealers

are required to provide after-sales service and warranty to
their respective clients which:

I. shall be monitored by the agriculture offices of the LGUs

II. shall be monitored by the Bureau of Agricultural and
Fisheries Engineering (BAFE)
III. in accordance with the PAES or with the warranty policy
of the manufacturer, whichever is more advantageous to
the
client
IV. shall be accompanied by a warranty card which shall
specify the after-sales service policy.
a. I and II b. I and III
c. IV d. I,II,III and IV
e. None of the above
An act promoting agricultural and fisheries
mechanization development in the country,
also known as the “Agricultural and
Fisheries Mechanization (AFMech)Law?

a. RA 10061 b. RA 10915

c. RA 10661 d. RA 10601

e. None of the above

This Decree shall be known and cited as the
“Agricultural Investments Incentives Act”.

a. PD 1181 b. PD 1529

c. PD 1159 d. RA 1919

e. None of the above

In what law does National Building Code
enacted?

a. RA 10601 b. RA 10915

c. PD 1096 d. RA 6541

e. None of the above

An act mandating and strengthening the
continuing professional development program for
all regulated professions, creating the
continuing professional development council,
and appropriating funds therefor, and for other
related purposes, also known as “Continuing
Professional Development Act of 2016”

a. RA 10601 b. RA 10915

c. RA 10921 d. RA 10912

e. None of the above

An act providing for the modernization,
standardization and regulation of the
procurement activities of the government and
for other purposes, also known as “Government
Procurement Reform Act”

a. RA 9184 b. RA 7160

c. PD 1445 d. RA 10912

e. None of the above

The seal of an Agricultural and Biosystems
Engineer shall be circular in shape with
_______ diameter

a. 41mm b. 44mm

c. 45mm d. 42mm

e. None of the above

They are rules of conduct of any organized
society, however simple or small, that
are enforced by threat of punishment if they
are violated.

a. Contracts b. Ethics

c. Law d. Policy

e. None of the above

On what year Agricultural Engineering was
introduced?

a. 1800 b. 1907

c. 1920 d. 1950

e. None of the above

 A device used in measuring speed of a wind
pump.

a. Accelerometer b. Ammeter

c. Speedometer d. Tachometer

e. None of the above

Machine commonly manufactured in the
Philippines.

a. Rice mill b. Thresher

c. Tractor d. Grain dryer

e. None of the above

This crop is the focus when tractors are
first introduced in the Philippines.

a. Corn b. Peanut

c. Sugarcane d. Banana

e. None of the above

The grain-straw ratio for samples to be used
for testing a mechanical rice thresher
should be at ______ range

a. 0.35 to 0.50 b. 0.50 to 0.65

c. 0.65 to 0.80 d. 0.55 to 0.70

e. None of the above

Primary tillage equipment that cuts the soil
to a depth of 6 to 18 inches

a. Chisel plow b. Moldboard plow

c. Spiral plow d. Subsoiler

e. None of the above

The minimum number of trials required in
testing heated-air mechanical grain dryer

a. One b. Two

c. Three d. Four

e. None of the above

The untilled area where the machine turns.

a. Dead furrow b. Back furrow

c. Furrow crown d. Headland

e. None of the above

An agricultural machine is purchased for
P100,000 and has a useful life of 12 years.
At the end of 12 years, the salvage value is
P13,000. By straight-line depreciation, what
is the accumulated depreciation at the end
of 8 years?

a. Php 58,000 b. Php 53,000

c. Php 42,000 d. Php 68,000

e. None of the above

Remains constant whatever the quantity of
goods and services produced.

a. Variable cost b. Fixed cost

c. Increment cost d. Overhead cost

e. None of the above

 It refers to the ongoing costs to operate a
business excluding direct cost.

a. Variable cost b. Fixed cost

c. Increment cost d. Overhead cost

e. None of the above

The projection of cash inflow and outflow of
a farm to estimate the incremental net
benefit of the life of the project is known
as ____.

a. Farm budget b. Farm Plan

c. Farm inventory d. Farm contract

e. None of the above

A transaction by your company this year
involving the repayment in cash of a portion
of the long-term loan of the company in the
amount of P 70,000.00 would have the
following effect.

a. increase in assets = increase in liabilities

b. decrease in assets = decrease in liabilities
c. Increase in assets = decrease in ownership
d. Increase in one asset = decrease in another asset
e. None of the above
A savings loan offers a 5.25% rate per annum
compounded daily. What is the effective
annual rate?

a. 5.31% b. 5.54%

c. 5.39% d. 5.65%

e. None of the above

Supposed that you will need Php 50,000 in a
span of 5 years, with an interest rate of 5%
compounded quarterly. How much will be the
initial investment?

a. Php 35,000 b. Php 45,000

c. Php 39,000 d. Php 40,000

e. None of the above

This includes any goods employed in
production other than land, labor, buildings
and fences.

a. Infrastructures b. Capital

c. Property d. Currency

e. None of the above

The groundwheel of a planter is normally
related to the operation of this component.

a. Seed tube b. Furrow opener

c. Metering device d. Double disc closer

e. None of the above

In what part of the machine does gear oil
used?

a. Engine b. Flywheel

c. Transmission box d. Carburetor

e. None of the above

The regular servicing and checking of the
machine to keep the machine
running efficiently.

a. Fabrication b. Warranty

c. After-sales service d. Maintenance

e. None of the above

What is the volume in the cylinder if the
piston is at the top dead center?

a. Bore b. Stroke

c. Cylinder Volume d. Clearance volume

e. None of the above

The direct type of power transmission system
has _____ efficiency.

a. 90% b. 95%

c. 98% d. 100%

e. None of the above

It is the power developed by the engine of a
tractor which is available for pulling,
dragging or similar tractive effort.

a. Belt horsepower b. Indicated horsepower

c. Brake horsepower d. Drawbar horsepower

e. None of the above

How many times greater is the power of a
carabao over man?

a. 5 b. 0.5

c. 10 d. 15

e. None of the above

Part of the moldboard plow bottom that
receives the furrowlice , lifts, inverts and
throws it to one side is called ____

a. Share b. Landside

c. Moldboard d. frog

e. None of the above

General-purpose tillage involves cutting and
pulverizing the soil to a depth of _____.

a. Up to 3 inches b. Up to 12 inches

c. Up to 6 inches d. Up to 18 inches

e. None of the above

The gearbox placed on first gear will
develop _____.

a. High torque – high speed

b. Low torque - low speed
c. High torque – low speed
d. Low torque – high speed
e. None of the above
This rating is given to diesel fuels for
their ability to burn without detonating as
compared with the performance of reference
fuels.

a. Octane rating b. Heptane rating

c. lead rating d. Cetane rating

e. None of the above

In an ideal Diesel engine, the combustion of
fuel occurs at _______.

a. Constant temperature b. Constant enthalpy

c. Constant volume d. Constant pressure

e. None of the above

It is a device used to reduce the toxicity
of emissions from an internal combustion
engine. It works by providing an environment
for a chemical reaction wherein toxic
combustion by-products are converted to
less-toxic substances.

a. Muffler b. turbocharger

c. Catalytic converter d. Sparkplug

e. None of the above

In oxyacetylene welding, the shorter but
larger diameter storage tank is for ____

a. Oxygen b. Carbon dioxide

c. Acetylene d. Air

e. None of the above

Grooves or teeth on a shaft that matches up
with grooves on another component to
transmit torque.

a. Propeller b. Axle

c. Spline d. Sleeve

e. None of the above

A gasoline engine operating at 2500 rpm is
used to drive a burr mill that turns at 500
rpm. The pulley diameter of the mill is 8
inches. What is the recommended pulley for
the engine?

a. 1 in. b. 10 in.

c. 3 in. d. 2 in.

e. None of the above

What is the piston displacement volume in
liters of a four-stroke cycle 4-cylinder 15
× 18 cm engine rotating at 2000 rpm.

a. 63.3 b. 79.12

c. 15.83 d. 12.72

e. None of the above

Determine the required number of tractor(s)
needed to plow 50 hectares of land that must
be finished in 10 days (8 hrs/day), with a
speed of travel of 5 kph, effective width
of 4 meters, and an efficiency of 80%.

a. 1 b. 2

c. 3 d. 4

e. None of the above

If the specific yield of a particular well
is 3 gpm/ft drawdown and the discharge rate
of the pump is 30gpm, the total drawdown
is___

a. 5ft b. 20ft

c. 10ft d. 30ft

e. None of the above

Tractor A can cover a 1-Ha field in 2 hrs,
tractor B in 3 hrs, and tractor C in 6 hrs.
How long will it take to cover a 1-Ha field
if the three tractors worked together?

a. 0.5 hr b. 1.0 hr

c. 1.5 hr d. 2.0 hr

e. None of the above

Determine the theoretical field capacity
when a tractor operating at 6.4 kph is
pulling four-36 cm moldboard plow bottoms at
a depth of 20 cm.

a. 7.2 ha/day b. 0.18 ha/hr

c. 0.72 ha/hr d. 1.8 ha/day

e. None of the above

What is the theoretical field capacity of a
3-m combine traveling at 100 meters in 52
seconds?

a. 3.0 ha/hr b. 0.18 ha/hr

c. 2.08 ha/hr d. 1.5 ha/hr

e. None of the above

The application rate of a certain chemical
is recommended at 4 kg/ha. The calibration
test of a 16-liter knapsack sprayer is as
follows: Nozzle discharge = 1.2 liters/min,
swath = 1.5 m and walking speed = 20 m/min.
Determine the total volume of water applied
per hectare:

a. 200 L b. 400 L

c. 300 L d. 500 L

e. None of the above

Upon regularly checking the engine, some
problems were observed such as black exhaust
gas, overheating, white exhaust gas and
discharging of the battery.

What makes the black exhaust gas?

a. Excessive engine oil

b. Insufficient water in radiator
c. Clogged filter
d. Faulty alternator
e. None of the above
Upon regularly checking the engine, some
problems were observed such as black exhaust
gas, overheating, white exhaust gas and
discharging of the battery.

What makes the white exhaust gas?

a. Excessive engine oil

b. Insufficient water in radiator
c. Clogged filter
d. Faulty alternator
e. None of the above
Upon regularly checking the engine, some
problems were observed such as black exhaust
gas, overheating, white exhaust gas and
discharging of the battery.

What makes the overheating?

a. Excessive engine oil

b. Insufficient water in radiator
c. Clogged filter
d. Faulty alternator
e. None of the above
Upon regularly checking the engine, some
problems were observed such as black exhaust
gas, overheating, white exhaust gas and
discharging of the battery.

What makes the discharging of the battery?

a. Excessive engine oil

b. Insufficient water in radiator
c. Clogged filter
d. Faulty alternator
e. None of the above
A pump is drawing water from a river 10 m
below, discharging 5 lps to a rice field 5 m
below the elevation of the pump. Shaft has a
torque of 0.5 kg.m and has a speed of 1500
rpm.
Compute the total dynamic head

a. 10 m b. 15 m

c. 5 m d. 12 m

e. None of the above

A pump is drawing water from a river 10 m
below, discharging 5 lps to a rice field 5 m
below the elevation of the pump. Shaft has a
torque of 0.5 kg.m and has a speed of 1500
rpm.
Compute the theoretical power.

a. 1.735 kW b. 3.735 kW

c. 0.735 kW d. 2.735 kW

e. None of the above

A pump is drawing water from a river 10 m
below, discharging 5 lps to a rice field 5 m
below the elevation of the pump. Shaft has a
torque of 0.5 kg.m and has a speed of 1500
rpm.
Compute for the input power

a. 1.77 kW b. 2.77 kW

c. 0.77 kW d. 4.77 kW

e. None of the above

A pump is drawing water from a river 10 m
below, discharging 5 lps to a rice field 5 m
below the elevation of the pump. Shaft has a
torque of 0.5 kg.m and has a speed of 1500
rpm.
Compute for the pump efficiency.

a. 92.35% b. 95.45%

c. 89.30% d. 85.62%

e. None of the above

A palay buy-and-sell station accumulated and
utilized the following costs in a year of
operation.
Cost for buying palay – 5,000,000
Payment for loans - 200,000
Salaries and other cost-300,000
Training - 50,000
Which is the fixed cost?

a. 5,000,000 b. 200,000

c. 300,000 d. 50,000

e. None of the above

A palay buy-and-sell station accumulated and
utilized the following costs in a year of
operation.
Cost for buying palay – 5,000,000
Payment for loans - 200,000
Salaries and other cost-300,000
Training - 50,000
Which is the incremental cost?

a. 5,000,000 b. 200,000

c. 300,000 d. 50,000

e. None of the above

A palay buy-and-sell station accumulated and
utilized the following costs in a year of
operation.
Cost for buying palay – 5,000,000
Payment for loans - 200,000
Salaries and other cost-300,000
Training - 50,000
Which is the variable cost?

a. 5,000,000 b. 200,000

c. 300,000 d. 50,000

e. None of the above

A palay buy-and-sell station accumulated and
utilized the following costs in a year of
operation.
Cost for buying palay – 5,000,000
Payment for loans - 200,000
Salaries and other cost-300,000
Training - 50,000
Which is the overhead cost?

a. 5,000,000 b. 200,000

c. 300,000 d. 50,000

e. None of the above