Jump to content

866A

From Wikipedia, the free encyclopedia
866A
Westinghouse 866A mercury vapor half-wave rectifier tube.
ClassificationDiode
Cathode
Cathode typeDirectly heated
Heater voltage2.5
Heater current5 A
Anode
Max voltage5000
Max current250 mA
References
RCA Transmitting Tube Manual TT-3, 1940

The 866 is a mercury vapor half-wave rectifier intended for high-voltage applications. The voltage drop is approximately 15 volts up to 150 Hz. To avoid unwanted shorts the tube must be operated in a vertical position and the filament preheated for at least 30 seconds before applying the plate voltage.[1]

Construction

[edit]

Structurally, it consists of a linear electrode arrangement; a cup shaped anode with top cap and a cylindrical cathode. The socket is a medium 4 pin bayonet UX-4 and the glass envelope is ST-19. The 2.5 volt/ 5 Amp filament is connected to pins 1 and 4.

Operation

[edit]

Under normal operating conditions the tube glows blue and mercury droplets are visible.

Pictures in working conditions

[edit]

References

[edit]
  1. ^ "866". www.uli.de.

Further reading

[edit]
  • RCA Transmitting Tube Manual TT-3. Radio Corporation of America. 1940. pp. 64–65.
[edit]