Cisco IOS XR
Developer | Cisco Systems |
---|---|
OS family | Unix-like |
Working state | Current |
Source model | Closed source |
Latest release | 7.11.1 / December 8, 2023 |
Platforms | NCS 5x0, NCS 5x00, 8000, ASR 9000 and XRv 9000 Series Routers |
Userland | Linux |
Official website | Cisco IOS XR |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/IOX-RUN.jpg/220px-IOX-RUN.jpg)
IOS XR is a release train of Cisco Systems' widely deployed Internetwork Operating System (IOS), used on their high-end Network Convergence System (NCS) and carrier-grade routers such as the ASR 9000 series and Carrier Routing System series of routers.
Architecture
[edit]According to Cisco's product literature, IOS XR shares very little infrastructure with the other IOS trains, and is instead built upon a "preemptive, memory protected, multitasking, microkernel-based operating system".[1] The microkernel was formerly provided by QNX;[2] versions 6.0 up to 7.5.2 use the Wind River Linux distribution.[3] From version 7.6.1 and onwards, the kernel has been switched to OpenEmbedded.
IOS XR aims to provide the following advantages over the earlier IOS trains:
- Improved high availability (largely through support for hardware redundancy and fault containment methods such as protected memory spaces for individual processes and process restartability)
- Better scalability for large hardware configurations (through a distributed software infrastructure and a two-stage forwarding architecture)
- A package based software distribution model (allowing optional features such as multicast routing and MPLS to be installed and removed while the router is in service)
- The ability to install package upgrades and patches (potentially while the router remains in service)
- A web-based GUI for system management (making use of a generic, XML management interface)
History
[edit]IOS XR was announced along with the CRS-1 in May 2004.[4] The first generally available version was 2.0.
Some significant releases include the following.
- 3.2 – first generally available version for the 12000 router series
- 3.9 – first generally available version for the ASR 9000 router series
- 5.0 – first generally available version for the NCS6000 series, which is based upon a Linux kernel instead of QNX, and was released in September 2013[5]
- 6.1.1 - Introduces support for the 64-bit Linux-based IOS XR operating system on ASR 9000 series [6]
Differences between IOS and IOS XR
[edit]An example BGP configuration for IOS and IOS XR is shown.
More examples can be found in the Cisco document Converting Cisco IOS Configurations to Cisco IOS XR Configurations.[7]
IOS
router bgp 109
no synchronization
bgp log-neighbor-changes
neighbor 203.0.113.1 remote-as 109
neighbor 203.0.113.1 update-source Loopback0
no auto-summary
IOS XR
router bgp 109
neighbor 203.0.113.1
remote-as 109
update-source Loopback0
See also
[edit]References
[edit]- ^ "Products & Services". Cisco.
- ^ QNX press release Confirming use of their microkernel in IOS XR
- ^ "Cisco IOS XR Software Release 6.0 Operational Enhancements Data Sheet". Cisco.
- ^ "Cisco press release announcing CRS-1 and IOS XR". Archived from the original on March 9, 2005.
- ^ "Release Notes for Cisco NCS 6000 Series Routers, Release 5.0.0". Cisco.
- ^ "Release Notes for Cisco ASR 9000 Series Aggregation Services Routers, Release 6.1.2".
- ^ "Converting Cisco IOS Configurations to Cisco IOS XR Configurations" (PDF). cisco.com. Cisco Systems. Retrieved August 4, 2017.
External links
[edit]- Cisco Content Hub
- Cisco Feature Navigator
- Cisco IOS XR Support Page
- Cisco Aggregation Services Router 9000 Series Support Page
- Cisco Carrier Routing System Support Page
- Cisco multimedia documentation - covering IOS XR and its supported systems
- Cisco Security Advisories
- HEAnet's New Network and Working with IOS-XR