Jump to content

Merced station (Amtrak)

Coordinates: 37°18′26″N 120°28′36″W / 37.3073°N 120.4768°W / 37.3073; -120.4768
From Wikipedia, the free encyclopedia
Merced, CA
San Joaquins train at Merced station in April 2015
General information
Location324 West 24th Street
Merced, California
United States
Coordinates37°18′26″N 120°28′36″W / 37.3073°N 120.4768°W / 37.3073; -120.4768
Owned byState of California
Line(s)BNSF Stockton Subdivision[1]
Platforms2 side platforms
Tracks2
Connections
Construction
Parking46 spaces
AccessibleYes
Other information
Station codeAmtrak: MCD
History
Opened1896[2]
March 5, 1974
ClosedApril 30, 1971
Rebuilt1917, 2000[2]
Original companySan Francisco and San Joaquin Valley Railroad
Passengers
FY 2023120,583[3] (Amtrak)
Services
Preceding station Amtrak Following station
Turlock–Denair San Joaquins Madera
Former services
Preceding station Atchison, Topeka and Santa Fe Railway Following station
Empire
toward Richmond
Valley Division Fresno
toward Barstow
Location
Map

Merced station is an intercity rail station located in Merced, California, United States. The station is served by seven daily round trips of the San Joaquins and is a transfer point between trains and Yosemite Area Regional Transportation System (YARTS) buses serving Yosemite National Park. Merced station has side platforms adjacent to the tracks of the BNSF Railway Stockton Subdivision.[1]

The Southern Pacific Railroad (SP) opened through Merced in 1872, followed by the San Francisco and San Joaquin Valley Railroad in 1896. The Atchison, Topeka and Santa Fe Railway (AT&SF) purchased the latter railroad in 1899 and erected a larger station in 1917. Service on both the SP and AT&SF ended in 1971; Amtrak San Joaquin service began on the AT&SF line in 1974. In 2000, the city replaced the 1917-built station with a modern facility of similar design.

History

[edit]

The first railroad through Merced was the Central Pacific Railroad, a subsidiary of the Southern Pacific Railroad (SP), which reached the village on January 15, 1872.[4] Charles Henry Huffman, who was the SP's agent for land acquisition, founded Merced and moved there when the railroad opened.[2] The original village was along Bear Creek, but the town center quickly became the SP station.[2] A branch to Oakdale (later extended to Stockton) was completed in 1891.[4] The SP later built a new station off 16th Street at N Street.[2]

Merced station in November 1979
YARTS bus at Merced station in 2013

The San Francisco and San Joaquin Valley Railroad opened through Merced in 1896.[2] The Atchison, Topeka and Santa Fe Railway (AT&SF) – the SP's main rival – purchased the line in 1899, providing it a parallel competing mainline through the Central Valley.[2] In 1907, the Yosemite Valley Railroad (YVRR) began service from Merced to El Portal – the gateway to Yosemite National Park. The YVRR connected with both mainlines in Merced; its shops were northwest of downtown, while its station was adjacent to the AT&SF station.[2]

In 1917, the AT&SF built a new station at 24th Street and J Street. Unlike most of the railroad's stations in California, which were in the Mission Revival style, the Merced station was also influenced by the Arts and Crafts movement.[2] The lower part of the walls was bare brick, while the rest was coated in stucco to approximate the look of adobe. The eaves of the gabled roof provided shelter for passengers, and the northwest end of the station was open with broad arches.[2]

Passenger service on both branch lines ended in the 1940s. Merced remained an important stop on the two mainlines, serving named trains including the San Francisco Chief and Golden Gate on the AT&SF, and the San Joaquin Daylight and Sacramento Daylight on the SP. On May 1, 1971, Amtrak took over intercity passenger service in the United States from the private railroads. Amtrak chose to run its San Francisco–Los Angeles service over the Coast Line rather than the Central Valley, and passenger service to Merced ended.

Amtrak began the Oakland–Bakersfield San Joaquins on March 5, 1974.[5] The San Joaquin was controversially routed over the AT&SF rather than the SP (which ran through more major cities); the AT&SF station in Merced was used by Amtrak.[6] The SP station was renovated in the 1990s to serve as the city bus terminal.[2]

By the end of the century, the 1917-built station was in poor shape. In 2000, it was replaced by a new station on the same site.[2] The new station, which was funded by Caltrans, copies the basic design of the former station but with modern improvements. It includes improved facilities for Yosemite Area Regional Transportation System (YARTS) bus service to Yosemite (which serves as Amtrak Thruway route 15A).[2]

The planned Merced station of the California High-Speed Rail system will be built along the ex-SP alignment at R and 15th. San Joaquins services are expected to cease here once high-speed services begin.[7]

References

[edit]
  1. ^ a b SMA Rail Consulting (April 2016). "California Passenger Rail Network Schematics" (PDF). California Department of Transportation. p. 10.
  2. ^ a b c d e f g h i j k l m "Merced, CA (MCD)". Great American Stations. Amtrak.
  3. ^ "Amtrak Fact Sheet, Fiscal Year 2023: State of California" (PDF). Amtrak. March 2024. Retrieved June 26, 2024.
  4. ^ a b Gudde, Erwin S. (2010). California Place Names: The Origin and Etymology of Current Geographical Names. University of California Press. pp. 235, 247. ISBN 978-0-520-26619-3 – via Google Books.
  5. ^ "Press release announcing the launch of the San Joaquin, 1974". Amtrak. March 5, 1974.
  6. ^ Cook, Gale (March 10, 1974). "San Joaquin Valley Amtrak route draws some tart comments". Modesto Bee. Archived from the original on January 24, 2013.
  7. ^ "DRAFT 2023 BUSINESS PLAN UPDATE" (PDF). SJRRA. p. 36. Retrieved 25 October 2023. For the San Joaquins, this will require a new track connection between the BNSF and UPRR mainlines known as the Merced Intermodal Track Connection (MITC) Project (see Figure 4.1). In coordination with CHSRA and the City of Merced, the proposed multi-modal station at Merced would be elevated and have a western boundary at "R" Street. SJJPA is taking the lead in the environmental clearance/detailed design for the MITC Project (CHSRA is environmentally clearing the Merced Multimodal Station). To most efficiently integrate the San Joaquins and the interim HSR services, Merced will become the southern terminus for San Joaquins rail service once operations begin on the HSR infrastructure at the end of 2030.
[edit]

Media related to Merced station (Amtrak) at Wikimedia Commons