Jump to content

Sendzimir process

From Wikipedia, the free encyclopedia
Galvanized surface

Sendzimir process (named after Tadeusz Sendzimir) is used to galvanize a steel strip by using a small amount of aluminum in the zinc bath and producing a coating with essentially no iron-zinc alloy. The process guarantees high resistance and durability characteristics. About 75% of hydrogen was needed in the original Sendzimir process but all the newer nonoxidizing methods of degreasing require only 7–15%.[1]

The rolling of hot steel slabs using a Sendzimir mill requires a much smaller operational area than a continuous hot strip mill. This milling process is not recommended for heavy duty running surfaces such as crane rail.

See also

[edit]

References

[edit]
  1. ^ F. Porter. Zinc Handbook. 1991.