Jump to content

Inductor

From Simple English Wikipedia, the free encyclopedia
different inductors

An inductor is an electrical device used in electrical circuits because it acts like inertia in the electrical circuit. Just like inertia opposes the change in state of motion, inductor opposes the change in electric current.

An inductor is usually made from a coil of conducting material, like copper wire, that is then wrapped around a core made from either air or a magnetic metal. If you use a more magnetic material as the core, you can get the magnetic field around the inductor to be pushed in towards the inductor, giving it better inductance.[1] Small inductors can also be put onto integrated circuits using the same ways that are used to make transistors. Aluminum is usually used as the conducting material in this case.

How inductors work

[change | change source]

While a capacitor reacts against changes in voltage, an inductor reacts against changes in current. The inductor affects the current like inertia.

In general, the relationship between the time-varying voltage v(t) across an inductor with inductance L and the time-varying current i(t) passing through it is described by the differential equation:

[2]

How inductors are used

[change | change source]

Inductors are used often in analog circuits.[3] Two or more inductors that have coupled magnetic flux make a transformer. Transformers are used in every power grid around the world.

Inductors are also used in electrical transmission systems, where they are used to lower the amount of voltage an electrical device gives off or lower the fault current. Because inductors are heavier than other electrical components, people have been using them in electrical equipment less often.[3]

A schematic diagram icon for an Inductor, used in Circuit Drawings

Inductors with an iron core are used for audio equipment, power conditioning, inverter systems, rapid transit and industrial power supplies.[4]


Electrical engineers like to reduce diagrams of electrical circuits, no matter how complicated, to an equivalent circuit consisting of a network of just four different types of component. These four basic components are emfs, resistors, capacitors, and inductors. An inductor is usually represented by a little solenoid in circuit diagrams. In practice, inductors generally consist of short air-cored solenoids wound from enameled copper wire.

[change | change source]

References

[change | change source]
  1. "Inductors 101" (PDF). Vishay Intertechnology, Inc. 2008-08-12. Retrieved 2010-10-02.
  2. "Inductors and Calculus", All About Circuits, Retrieved June 8, 2016
  3. 3.0 3.1 "Inductor Archived 2019-12-08 at the Wayback Machine", Engineersblogsite.com, Retrieved June 8, 2016
  4. "Highly Efficient Iron Core Inductors", Agile Magnetics, Retrieved June 8, 2016

Other websites

[change | change source]