Customer Review

Reviewed in the United States on February 26, 2024
I got this for replacing a 16 year old Cuisinart coffee maker. So far this Oxo coffee maker has been doing a good job. The coffee does have slightly better flavor than my old coffee maker. It's easy to use. Of course I had to fiddle with it at the beginning but it is easy to use.
After trying out the carafe for my first batch of coffee just to check how everything works. I've been using it primarily with the single cup filling feature. This lets me fill my coffee cup directly. I really like this feature since I use an insulated coffee mug so the temperature is well maintained so I can enjoy the coffee. This coffee maker as many others uses 5 oz as a standard for a cup of coffee. I've been filling up my water tank for three cups and used three scoops of coffee ground. I pour in water to bring the water level right to the 3 cup level line. So I'm starting with 15 oz of water and I end up with 13 oz of coffee in my cup. The final 2 oz of water won't drip out. There's a sliding switch to use when I'm making a single serving of coffee to a cup. The position is pushed to the left so that it will hold open the valve on the coffee ground basket. I also push the switch to the right to close the valve to make sure no coffee leaks out after I take my cup away to close the valve. One thing I don't like about the carafe is that coffee can drip from the pouring sprout and it drips coffee onto the body of the carafe and the table. I took off one star for that.

There's a power button and two buttons to chose if you're making 1-4 cups of coffee and the other button is for 8-12 cups of coffee. I tried 8-12 for my single serving of coffee and it doesn't seem to make time difference.
Over all I like this coffee maker. It looks simple and modern and is easy to clean. If fits easily under my cabinet. I was able to buy this at under $150 as there was some deal going on so I bought it. I'll have to see how long this one will last.

June 13: I noticed after making a cup of coffee that at the hole where the water drains in to fill the holding tank. There was a slight bit of water backing up. I was curious so I used some descaling solution and did a cleaning cycle. This happened before the cleaning light turned on. After the cleaning cycle the water wasn't visible anymore at the end of a brew. So now when ever I see water backing up a bit I do a cleaning cycle. It may be too early but I guess it depends on how hard the local water is. I'll do it this way instead of the letting machine time it and give a signal to run a cleaning cycle.
12 people found this helpful
Report Permalink