Great little torque wrench, consistent performance and comes in a sturdy convenient case, the calibration cert. says it's within spec and it appears to be so(haven't tested against another calibrated wrench or used the weight test) but I'm taking the chance as nothing torqued has come loose and/or no bolts have been stripped so far.
Chances are you won't hear the "click" at the lower torque settings but you will notice the "give" when the torque has been reached. On first time use, tighten a few practice bolts to test the feel for the tool and always store at the lowest torque setting (2Nm) but do not screw the adjuster barrel below this point as it can go below the marking and you end up disassembling the tool unintentionally.