If you just got an Apple Vision Pro, you’re probably excited to try it out. And if you didn’t, you’re probably curious about what it’s like to set up a $3,500 virtual reality headset.
Before we get to the setup process, note that Apple only offers the Vision Pro directly from its website or its retail stores. That’s because there’s an entire fitting process required to make sure the headset sits snugly against your face. If you order online, you need an iPhone or an iPad with Face ID. The Apple site will show a QR code to scan with your device, after which it will scan your face.
If you buy the headset in a store, someone there will do the fitting for you. The custom fitting process adjusts—or at least mixes and matches—some aspects of the face mask on the device to best fit against your face. Once you've been fitted properly, it's time to complete the initial setup process.
iPhone or iPad with Face ID
Step 1: Turn the Vision Pro On
Whether you bring the Vision Pro home from an Apple Store or have it shipped to you, the first step is simply turning it on. This isn’t quite as easy as pressing a button on the headset, because of the separate battery pack. Take the Vision Pro out of the box, then remove the battery pack, power adapter, and USB-C-to-USB-C cable. Connect the battery pack to the circular connector at the end of the battery’s cable and the plug on the left side of the headset. This isn’t a MagSafe connection; you need to align the dot on the connector to the empty dot on the headset, then press it in and twist so the dots match up. The cable will run directly back when it’s connected.
The Vision Pro will start up at this point. You might want to plug the battery pack into a wall outlet to keep it topped off while you get everything running.
Step 2: Put the Vision Pro On Your Head
Now comes the exciting part: Pop the Vision Pro on your face, pull the headband over the back of your head, and twist the adjustment dial on the right side of the headband to tighten it. The display should tell you to press and hold the digital crown and stare at the floating glasses in front of you to align your view. Then you’ll be shown a surprisingly bright and sharp view of your surroundings, and the setup process will begin.
Step 3: Scan Your iPhone and Link Your Apple ID
You need an iPhone or iPad to set up the Vision Pro. The headset will direct you to bring your phone close to your face, after which its screen should prompt you to unlock it to begin the setup process. Your phone will then show a QR code you need to scan with the Vision Pro to continue.
This is a little weird because the iPhone doesn’t seem to directly factor into any part of the process besides telling the Vision Pro what Wi-Fi network to use and serving as a two-factor authentication (2FA) device for connecting the headset to your Apple ID. You can choose to manually enter your Apple ID credentials using a virtual keyboard, but after that you’ll need to get a six-digit 2FA code from your phone to authorize it.
Step 4: Scan Your Hands
Hand gestures are a major part of the VisionOS interface, so the next stop involves showing the Vision Pro what your hands look like. It will tell you to stick your arms out in front of you and hold your hands up with their backs facing the headset. After it records that view, it will tell you to flip your hands over. Then the scan will be done.
Step 5: Calibrate Eye Tracking
Eye tracking is an even more important part of VisionOS than hand gestures, so the headset will watch how your eyes move to get it right. It will tell you to stare at a dot, then at six dots in a circle, making a tap gesture with your finger as you look at each one. Then it will brighten the screen and have you go through the circle again, then brighten it further and do it a third time. This is probably to figure out how your eyes look at objects when they’re dilated to different degrees based on how bright the picture is.
Step 6: Set Up Your FaceTime Persona
Since you’ll be wearing a big mask on your face when using FaceTime on the Vision Pro, you can’t get a live view like you would with your iPhone's selfie camera or your Mac's webcam. Apple takes a different tack from Meta’s Pixar-like computer-generated avatars by building a simulation of your actual face to show to people you’re on calls with.
The Vision Pro will instruct you to remove it from your head and point the visor at your face. The display on the front will glow and show you a series of circles with your face inside them. The surprisingly loud speakers will tell you to look at the visor, then turn your head left, right, up, and down. Then it will record your facial expressions by having you smile with your mouth closed, smile while showing your teeth, close your eyes, and raise your eyebrows. Those eight actions are enough for the Vision Pro to put together a surprisingly good, photorealistic version of your face to show on FaceTime calls (though it didn’t quite get my hair right).
You can then tweak your avatar by putting different glasses on it.
Step 7: Set Up Optic ID
Instead of Face ID, the Vision Pro uses Optic ID. This means it scans your eyes to confirm you are who you say you are. After your FaceTime persona is set up, the Vision Pro will tell you to look at a symbol in front of you. After a few seconds, Optic ID will be set up. Seriously, that’s it.
As a backup, the Vision Pro will also have you set up a six-digit manual passcode, just like with iOS, iPadOS, and macOS devices.
Step 8: Activate the Vision Pro
With all of the above steps done, the headset will activate. It said it would take a few minutes, but it seemed to finish within 20 seconds.
After that, the Vision Pro will show you a quick tutorial on basic gestures and interface elements, like selecting items, resizing windows, and bringing up quick menus.
Step 9: Start Spatial Computing
After the Vision Pro is set up, you’ll be staring at your surroundings with a floating screen in front of you showing macOS-like icons. You can start using the headset now, either by diving into the preinstalled apps or browsing the App Store.
More on the Vision Pro
This is obviously just scratching the surface of the Vision Pro experience. If you're still deciding whether Apple's spatial computing headset is worth the money, head over to our story on 7 things to know before you buy the Vision Pro. And be sure to check back soon for our full review.
![The Best VR Headsets of 2023](https://zmgvideos.mashable.com/cms/2023/11/060PCP37BzyjCQokMZuEdmd-1700068954/thumb/00001.png)
Apple Fan?
Sign up for our Weekly Apple Brief for the latest news, reviews, tips, and more delivered right to your inbox.
This newsletter may contain advertising, deals, or affiliate links. Subscribing to a newsletter indicates your consent to our Terms of Use and Privacy Policy. You may unsubscribe from the newsletters at any time.
Thanks for signing up!
Your subscription has been confirmed. Keep an eye on your inbox!
Sign up for other newslettersRead the latest from Will Greenwald
- How to Connect Your Nintendo Switch Pro Controller to Your PC
- How to Connect an Xbox Controller to a PC
- How to Record Spatial Video With an iPhone and Play It on the Vision Pro
- How to Connect a VCR to a Modern TV
- How to Capture and Share Screenshots, Video Clips on the Xbox Series X, Series S
- More from Will Greenwald