In Compose, you can chain multiple modifiers together to change the look and feel of a composable. These modifier chains can affect the constraints passed to composables, which define width and height bounds.
This page describes how chained modifiers affect constraints and, in turn, the measurement and placement of composables.
Modifiers in the UI tree
To understand how modifiers influence each other, it's helpful to visualize how they appear in the UI tree, which is generated during the composition phase. For more information, see the Composition section.
In the UI tree, you can visualize modifiers as wrapper nodes for the layout nodes:
![Code for composables and modifiers, and their visual representation as a UI tree.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/modifier-wrapping.png)
Adding more than one modifier to a composable creates a chain of modifiers. When
you chain multiple modifiers, each modifier node wraps the rest of the chain
and the layout node within. For example, when you chain a clip
and a
size
modifier, the clip
modifier node wraps the size
modifier node,
which then wraps the Image
layout node.
In the layout phase, the algorithm that walks the tree stays the same, but each modifier node is visited as well. This way, a modifier can change the size requirements and placement of the modifier or layout node that it wraps.
As shown in Figure 2, the implementation of the Image
and Text
composables
themselves consist of a chain of modifiers wrapping a single layout node. The
implementations of Row
and Column
are simply layout nodes that describe how
to lay out their children.
![The tree structure from before, but now each node is just a simple layout, with a lot of modifier wrapping nodes around it.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/composables-modifiers.png)
To summarize:
- Modifiers wrap a single modifier or layout node.
- Layout nodes can lay out multiple child nodes.
The following sections describe how to use this mental model to reason about modifier chaining and how it influences the size of composables.
Constraints in the layout phase
The layout phase follows a three-step algorithm to find each layout node's width, height, and x, y coordinate:
- Measure children: A node measures its children, if any.
- Decide own size: Based on those measurements, a node decides on its own size.
- Place children: Each child node is placed relative to a node's own position.
Constraints
help find the right sizes for the nodes during the first two
steps of the algorithm. Constraints define the minimum and maximum bounds for a
node's width and height. When the node decides on its size, its measured size
should fall within this size range.
Types of constraints
A constraint can be one of the following:
- Bounded: The node has a maximum and minimum width and height.
![Bounded constraints of different sizes within a container.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/bounded-constraints.png)
- Unbounded: The node is not constrained to any size. The maximum width and height bounds are set to infinity.
![Unbounded constraints that have the width and height set to infinity. The constraints extend beyond the container.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/unbounded-constraints.png)
- Exact: The node is asked to follow an exact size requirement. The minimum and maximum bounds are set to the same value.
![Exact constraints that conform to an exact size requirement within the container.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/exact-constraints.png)
- Combination: The node follows a combination of the above constraint types. For example, a constraint could bound the width while allowing for an unbounded maximum height, or set an exact width but provide a bounded height.
![Two containers that show combinations of bounded and unbounded constraints and exact widths and heights.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/combination-constraints.png)
The next section describes how these constraints are passed from a parent to a child.
How constraints are passed from parent to child
During the first step of the algorithm described in Constraints in the layout phase, constraints are passed down from parent to child in the UI tree.
When a parent node measures its children, it provides these constraints to each child to let them know how big or small they're allowed to be. Then, when it decides its own size, it also adheres to the constraints that were passed in by its own parents.
At a high level, the algorithm works in the following way:
- To decide the size it actually wants to occupy, the root node in the UI tree measures its children and forwards the same constraints to its first child.
- If the child is a modifier that does not impact measurement, it forwards the constraints to the next modifier. The constraints are passed down the modifier chain as-is unless a modifier that impacts measurement is reached. The constraints are then re-sized accordingly.
- Once a node is reached that doesn't have any children (referred to as a "leaf node"), it decides its size based on the constraints that were passed in, and returns this resolved size to its parent.
- The parent adapts its constraints based on this child's measurements, and calls its next child with these adjusted constraints.
- Once all children of a parent are measured, the parent node decides on its own size and communicates that to its own parent.
- This way, the whole tree is traversed depth-first. Eventually, all the nodes have decided on their sizes, and the measurement step is completed.
For an in-depth example, see the Constraints and modifier order video.
Modifiers that affect constraints
You learned in the previous section that some modifiers can affect constraint size. The following sections describe specific modifiers that impact constraints.
size
modifier
The size
modifier declares the preferred size of the content.
For example, the following UI tree should be rendered in a container of 300dp
by 200dp
. The constraints are bounded, allowing widths between 100dp
and
300dp
, and heights between 100dp
and 200dp
:
![A portion of a UI tree with the size modifier wrapping a layout node, and the
representation of the bounded constraints set by the size modifier in a container.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/size-modifier.png)
The size
modifier adapts incoming constraints to match the value passed to it.
In this example, the value is 150dp
:
![The same as Figure 7, except with the size modifier adapting incoming constraints to match the value passed to it.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/size-modifier-2.png)
size
modifier adjusting constraints to 150dp
.If the width and height are smaller than the smallest constraint bound, or larger than the largest constraint bound, the modifier matches the passed constraints as closely as it can while still adhering to the constraints passed in:
![Two UI trees and their corresponding representations in containers. In the first, the
size modifier accepts the incmoing constraints; in the second, the size modifier adapts to the
too-large constraints as closely as possible, resulting in constraints that fill the container.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/size-modifier-3.png)
size
modifier adhering to the passed constraint as closely
as possible.Note that chaining multiple size
modifiers does not work. The first size
modifier sets both the minimum and maximum constraints to a fixed value. Even if
the second size modifier requests a smaller or larger size, it still needs to
adhere to the exact bounds passed in, so it won't override those values:
![A chain of two size modifiers in the UI tree and its representation in a container,
which is the result of the first value passed in and not the second value.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/size-modifier-4.png)
size
modifiers, in which the second value passed
in (50dp
) does not override the first value (100dp
).requiredSize
modifier
Use the requiredSize
modifier instead of size
if you need your
node to override the incoming constraints. The requiredSize
modifier replaces
the incoming constraints and passes the size you specify as exact bounds.
When the size is passed back up the tree, the child node will be centered in the available space:
![The size and requiredSize modifier chained in a UI tree, and the corresponding
representation in a container. The requiredSize modifier constraints override the size modifier
constraints.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/requiredsize-modifier.png)
requiredSize
modifier overriding incoming constraints from
the size
modifier.width
and height
modifiers
The size
modifier adapts both the width and height of the constraints. With
the width
modifier, you can set a fixed width but leave the height undecided.
Similarly, with the height
modifier, you can set a fixed height, but leave the
width undecided:
![Two UI trees, one with the width modifier and its container representation and the other
with the height modifier and its representation.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/width-height-modifier.png)
width
modifier and height
modifier setting a fixed width
and height, respectively.sizeIn
modifier
The sizeIn
modifier lets you set exact minimum and maximum constraints
for width and height. Use the sizeIn
modifier if you need fine-grained control
over the constraints.
![A UI tree with the sizeIn modifier with minimum and maximum widths and heights set,
and its representation within a container.](/https/developer.android.com/static/develop/ui/compose/images/layouts/constraints-modifiers/sizein-modifier.png)
sizeIn
modifier with minWidth
, maxWidth
, minHeight
, and
maxHeight
set.Examples
This section shows and explains the output from several code snippets with chained modifiers.
Image( painterResource(R.drawable.hero), contentDescription = null, Modifier .fillMaxSize() .size(50.dp) )
This snippet produces the following output:
- The
fillMaxSize
modifier changes the constraints to set both the minimum width and height to the maximum value —300dp
in width and200dp
in height. - Even though the
size
modifier wants to use a size of50dp
, it still needs to adhere to the incoming minimum constraints. So thesize
modifier will also output the exact constraint bounds of300
by200
, effectively ignoring the value provided in thesize
modifier. - The
Image
follows these bounds and reports a size of300
by200
, which is passed all the way up the tree.
Image( painterResource(R.drawable.hero), contentDescription = null, Modifier .fillMaxSize() .wrapContentSize() .size(50.dp) )
This snippet produces the following output:
- The
fillMaxSize
modifier adapts the constraints to set both the minimum width and height to the maximum value —300dp
in width, and200dp
in height. - The
wrapContentSize
modifier resets the minimum constraints. So, whilefillMaxSize
resulted in fixed constraints,wrapContentSize
resets it back to bounded constraints. The following node can now take up the whole space again, or be smaller than the entire space. - The
size
modifier sets the constraints to minimum and maximum bounds of50
. - The
Image
resolves to a size of50
by50
, and thesize
modifier forwards that. - The
wrapContentSize
modifier has a special property. It takes its child and puts it in the center of the available minimum bounds that were passed to it. The size it communicates to its parents is thus equal to the minimum bounds that were passed into it.
By combining just three modifiers, you can define a size for the composable and center it in its parent.
Image( painterResource(R.drawable.hero), contentDescription = null, Modifier .clip(CircleShape) .padding(10.dp) .size(100.dp) )
This snippet produces the following output:
- The
clip
modifier does not change the constraints.- The
padding
modifier lowers the maximum constraints. - The
size
modifier sets all constraints to100dp
. - The
Image
adheres to those constraints and reports a size of100
by100dp
. - The
padding
modifier adds10dp
on all sizes, so it increases the reported width and height by20dp
. - Now in the drawing phase, the
clip
modifier acts on a canvas of120
by120dp
. So, it creates a circle mask of that size. - The
padding
modifier then insets its content by10dp
on all sizes, so it lowers the canvas size to100
by100dp
. - The
Image
is drawn in that canvas. The image is clipped based on the original circle of120dp
, so the output is a non-round result.
- The