Jump to content

8 cubic meter-class dredger

From Wikipedia, the free encyclopedia
History
PRC
BuilderEast Sea Shipyard
CompletedJuly 1985
AcquiredJuly 1985
CommissionedJuly 1985
General characteristics
Length40 m (131 ft 3 in)
Beam16 m (52 ft 6 in)
Draught2.1 m (6 ft 11 in)
Depth3 m (9 ft 10 in)
Endurance15 days

The 8 cubic meter class dredger is a class of naval auxiliary ship currently in service with the People's Liberation Army Navy (PLAN). The complete name of the class is 8 cubic meter grab dredger, and it can also be used as a crane ship, capable of lifting a maximum of a hundred tons for each single lift.[1] In 1984, the PLAN Equipment and Technology department signed a contract with East Sea Shipyard to build an 8 cubic meter class dredger / crane ship designed to meet the requirements of Nippon Kaiji Kyokai (ClassNK). The general designers were Xun Zhi-Liang (荀志亮) and Zhang Lin-Sheng (张林生). Construction began in December 1984, and after completion, the ship sailed to Qingdao in June 1985 for further sea trials, which were completed successfully. The following month, the ship was handed over to the PLAN.[1]

8 cubic meter class dredger in PLAN service was originally designated by a combination of two Chinese characters followed by three-digit number. The first Chinese character is Jiao (交), short for Jiao-Tong (交通, meaning traffic in Chinese). The second Chinese character is Zhua (抓), short for Zhua-Dou-Shi (抓斗, meaning grab in Chinese, because the ship is a grab dredger).[1] However, the pennant numbers may have changed due to the change of Chinese naval ship-naming convention.

class Pennant # Builder Commissioned Status
8-m3 class Jiao-Zhua 110 East Sea Shipyard July 1987 Active

References

[edit]
  1. ^ a b c "第二节 挖泥船" [8 cubic meter-class dredger] (in Chinese). Archived from the original on 24 September 2015. Retrieved 3 August 2015.