About the Kicker 48CWR84
Play maker
Play maker
Kicker designed their CompR subs for people who love to hear powerful low-frequency punch in their music. The CompR 48CWR84 8” subwoofer comes equipped with a tough polypropylene cone that stays rigid during intense play sessions so you hear accurate bass. A custom-designed back and top plate give the woofer plenty of room to travel, while the double-stitched Santoprene rubber surround helps to control cone movement during a heavy workout. This sub uses newly designed venting in its heavy steel basket to shrug off heat, so you can count on reliable performance.
Any way you want it
This Kicker CompR sub will handle up to 300 watts RMS so make sure you have an amplifier that'll do it justice. Its dual 4-ohm voice coils make it easy to get maximum power from a mono amplifier, or to wire it into a multi-sub setup. This versatile sub works well in sealed or ported enclosures.
Subwoofer Wiring Diagrams
To see sample wiring diagrams for all common subwoofer/amplifier combinations, check out this informative article.
Product highlights:
- Featured in our article: Best 8" car subwoofers for 2024
- 8" subwoofer with dual 4-ohm voice coils
- injection-molded polypropylene cone
- double-stitched Santoprene rubber surround
- steel basket
- power handling: 300 watts RMS (150 watts per coil)
- peak power handling: 600 watts
- frequency response: 30-500 Hz
- sensitivity: 82.1 dB
- top-mount depth: 4.125"
- sealed box volume: 0.4 - 1.8 cu. ft.
- ported box volume: 0.8 - 1.2 cu. ft.
- grille not included
- warranty: 1 year
- MFR # 48CWR84
- Item # 20648CR84
What's in the box:
- One 8" Dual 4-ohm voice coil subwoofer
- Kicker logo sticker
- 4 Adhesive backed screw covers
- Manual (English/ Spanish/ German/ French)
- Screw cover installation instructions
- Template on box
More details on the Kicker 48CWR84
Features & specs
Features and Specs | ||
---|---|---|
Size | 8-inch | |
Impedance (Ohms) | 2, 8 | |
Cone Material | Polypropylene | |
Surround Material | Santoprene Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
82.1 dB at 1 watt | |
Frequency Response | 30 - 500 Hz | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 600 | |
Top Mount Depth (inches) | 4 3/16 | |
Bottom Mount Depth (inches) | 4 11/16 | |
Cutout Diameter or Length (inches) | 6 13/16 | |
Frame Width | 8.512 | |
Frame Length | 8.512 | |
Vas (liters) | --- | |
Fs (Hz) | --- | |
Qts | --- | |
Xmax (millimeters) | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | N/A | |
Minimum Sealed Box Volume (cubic feet) | 0.4 | |
Maximum Sealed Box Volume (cubic feet) | 1 | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | 0.8 | |
Maximum Ported Box Volume (cubic feet) | 1.2 |
Product Research
Features
Dual Voice Coils: This woofer features dual 4Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Cooling: Kicker engineers developed a Forced Air Cooling system, using the motor structure to pull air across the voice coils, helping the sub run up to 25% cooler than the previous model.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.4 ft³ to 1.0 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. Kicker recommends ported enclosures in the following range:
- Minimum Enclosure Volume: 0.8 ft³ with an 8" x 1½" x 20¾" slot port
- Maximum Enclosure Volume: 1.2 ft³ with an 8" x 2" x 19⅛" slot port
The Kicker 48CWR84 replaces these items
Kicker CompR 43CWR84
- injection-molded polypropylene cone with rubber surround
- power range: 100-300 watts RMS
- frequency response: 30-500 Hz
Loading...
Loading accessories...
Customer Q&A
10 questions already asked
Loading...
Loading articles...
Awesome Sub! It gives you more bang for your buck! It looks good in my Audi S5. It really gives you the lows that were missing in my factory system. The install and tuning was easy. I highly recommend this speaker with the kicker amp to get the best performance out of the two.
Bobby from Jacksonville, FL