Professional Documents
Culture Documents
Science Support Material 1
Science Support Material 1
SUPPORT MATERIAL
CLASS X SCIENCE
STUDENT SUPPORT MATERIAL
INSPIRATION
MENTOR:
Smt. Purabi Das, Principal, KV Dharangadhra
SCIENCE
CLASS-10
CHAPTER-1 CHEMICAL REACTIONS AND EQUATIONS
Chemical Reaction:-
Any process that involves the rearrangement of structure of the substance or conversion
of reactants into products is defined as Chemical Reaction.
For a Chemical Reaction to occur, the change can be observed in the form of -
Change in Colour: Iron rusting which has colour change from silver to reddish brown.
Change in Temperature: There are two types of reaction i.e Exothermic and
Endothermic Reaction.
Exothermic Reactions: Those reactions in which energy is released in the form of heat
are called Exothermic Reactions.
Examples -
Examples -
Change in State
Some chemical reactions are characterized by a change in state.
When wax is burned (in the form of wax candle,) then water and carbon dioxide are
formed.
Now, wax is a liquid whereas carbon dioxide is a gas. This means that during the
combustion reaction of wax, the physical state changes from solid to liquid and gas.
Physical Change
In this change identity of the substance remains same.
Reactants are converted into substance due to formation or broken down of older bonds
Chemical Equation
The symbolic representation of chemical reaction using symbols and formulae is known
as Chemical Equation. For this, reactants are written in left hand side whereas products
are written on the right.
Balanced Chemical Equation
A balanced chemical equation is the one where the number of atoms involved in reactants
side is equal to number of atoms on product side.
Displacement Reaction is a reaction in which more reactive element will displaces the less
reactive element.
Double Displacement Reaction is a type of reaction in which cations and anions in the
reactants switch the places to form new products.
Corrosion
Metals are prone to corrosion. It is a slow conversion of metals into some undesirable
compounds. This occur may be due to reaction with oxygen, gases, acids etc. When irons
reacts with atmospheric oxygen and moisture, a red layer is formed on the surface of the
iron, this process is known as Rusting.
Rancidity
When food containing fats and oils are exposed to the atmosphere, the oxidation of fat and
oil occurs, this is known as Rancidity.
Methods to Prevent Rancidity
MCQ
Q.3 When S02 gas is passed through saturated solution of H2S, which of the following reaction
occurs?
(a) SO2 + 2H2S → 2H20 + 3S
(b) SO2 + 2H2S → H20 + 3S
(c)SO2 + H2S → H2O + S
(d) SO2 + H2O → SO3 + H2
Explaination: Reason: In this reaction HCl is oxidised to Cl2, whereas MnO2 is reduced to
MnCl2.
Fill in the Blanks
Q 6. The addition of oxygen to a substance is called …………..... whereas removal of
oxygen is called ………….......
Ans. oxidation, reduction
Ans. SO3
Ans. salts
Ans. BaSO4
Q 10. ……….....…. is the process in which metals are eaten up gradually by the action of air,
moisture or a chemical on their surface.
Ans. Corrosion.
Directions (Q. Nos. 11-13) In the following questions a statement of Assertion is followed by a
statement of Reason. Mark the correct choice as
(a) If both Assertion and Reason are true and Reason is the correct explanation of
Assertion.
(b) If both Assertion and Reason are true but Reason is not the correct explanation of
Assertion.
(c) If Assertion is true but Reason is false.
(d) If Reason is true but Assertion ls false.
(e) If both Assertion and Reason are false.
Q11. Assertion: Chemical reaction changes the physical and chemical state of a
substance.
Reason: When electric current is passed through water (liquid), it decomposes to
produce hydrogen and oxygen gases.
Ans:
Q12. Assertion: In a balanced chemical equation, total mass of the each element towards
reactant side= total mass of the same element towards product side.
Reason: Mass can neither be created nor destroyed during a chemical change.
Ans:
Q13. Assertion: When calcium carbonate is heated, it decomposes to give calcium oxide and
carbon dioxide.
Reason: The decomposition reaction takes place on application of heat, therefore, its
and endothermic reaction.
Ans:
Q14. Assertion: Chips manufacturers usually flush bags of chips with gas such as nitrogen
to prevent the chips from getting oxidised.
Reason: This increase the taste of the chips and helps in their digestion.
Ans:
Q15. Assertion: Rusting of iron metal is the most common form of corrosion.
Reason: The effect of rusting of iron can be reversed if they are left open in sunlight.
Ans:
Q16. (a) Name and state the law which is kept in mind while we balance a chemical equation.
Ans: law of conservation
(b) What are the coefficients of the correctly balanced
equation? ?Fe2O3 + ?CO → ?Fe+ ?CO2
Ans: 1 , 3 , 2 , 3
Q17. What is a precipitation reaction? Give an example.
Ans. Reaction in which an insoluble substance or precipitate is formed
Na2SO4 + BaCl2------------BaSO4+2NaCl
Q18. Classify the following reaction as combination, decomposition, displacement and double
displacement reaction:-
a)BaCl2 +H2SO4 → BaSO4 +2HCl
Ans: Double displacement reaction.
b) 3CuSO4+ 2Al→ Al2 (SO4)3 +3Cu
Ans: Displacement reaction.
c) ZnCO3 →ZnO +CO2
Ans: Decomposition reaction
d) C +O2→CO2
Ans: Combination reaction
Questions [3 Marks]
Q19. A Name the type of chemical reaction represented by the following equation:
Ans.
Q22. Which products will be obtained when lead nitrate is heated simply. Write balanced
chemical equation for the reaction? State the type of chemical reaction that occur in the change.
Ans: Lead monoxide, nitrogen dioxide and oxygen gas will be liberated.
Ans: The equations in which gaseous are written in atomic form instead of molecular form and
equation is not balanced, are called skeltal type equation. They represent gaseous elements
formed in atomic state and equation is not balanced
Questions [5 Marks]
Q24. (a) Define a balanced chemical equation. Why should an equation be balanced?
(b) Write the balanced chemical equation for the following reaction:
(i) Phosphorus burns in presence of chlorine to form phosphorus penta chloride.
(ii) Burning of natural gas.
(iii) The process of respiration.
Ans: (a) Balanced chemical equation has an equal number of atoms of different elements in the
reactants and products. According to law of conservation of mass, matter can neither be created
nor be destroyed in a chemical reaction.
(b)(i) P4 (s) + 10Cl2 (g) ———> 4PCl5 (S)
(i)CH4 (g) + 2O2 (g) ———> CO2 (g) + 2H2O(l) + heat energy
(iii) C6H12O6 (s) + 6O2 (g) + 6H2O ———> 6CO2 (aq) + 12H2O (l) + energy
Q25. (a) Explain two ways by which food industries prevent rancidity.
(b) Discuss the importance of decomposition reaction in metal industry with three
points.
Ans: (a) (i) Rancidity can be prevented by adding antioxidants to food containing fat and oil, e.g.
butylated hydroxy anisole is added to butter as antioxidant.
(ii) It can be prevented by packaging fat and oil containing foods in nitrogen gas.
(b) (i) Molten NaCl is electrolytically decomposed to form sodium metal.
(ii) Aluminium metal is obtained by electric decomposition of bauxite ore mixed with cryolite.
(iii) Carbonate ores are thermally decomposed to give metal oxide which on reduction give
metal.
Q26. (a) Write one example for each of decomposing reaction carried out with help of (i)
Electricity (ii) Heat (iii) Light
(b) Which of the following statements is correct and why copper can displace silver from silver
nitrate and silver can displace copper from copper sulphate solution.
Ans:
1. The figure given below represents the experiment carried out between conc.
sulphuric acid and sodium chloride, which react with each other to form HCl gas.
Blue litmus paper is brought near the mouth of the delivery tube to check the
presence of HCl acid but no change is observed in the color of litmus paper
because:
12. Which one of the following salts will dissolve in water to form an alkaline
solution?
a. Potassium carbonate
b. Sodium chloride
c. Sodium carbonate
d. Potassium sulphate
Answer. a. Potassium carbonate
13. Copper sulphate crystals when heated strongly, lose their water of
crystallization to give anhydrous copper sulphate accompanied by a change in color
from:
a. Blue to green
b. Blue to white
c. Blue to sky blue
d. Blue to grey
Answer. b. Blue to white
Very Short Answer Type Questions[ll] [1 Marks]
14 .What would be the colour of red litmus in a solution of sodium carbonate?
Answer. The red litmus will change to blue in sodium carbonate solution.
15.Which gas is evolved when sodium hydrogencarbonate reacts with dilute hydrochloric
acid?
Answer.Carbon dioxide gas is evolved.
17.Name the gas usually liberated when a dilute acid reacts with a metal. What happens
when a burning candle is brought near this gas?
Answer. H2 gas is liberated. It burns with pop sound when burning candle is brought near the
gas.
20.Why does 1 M HC1 solution have a higher concentration of H+ ions than 1 M CH3COOH
solution?
Answer.1 M HCl has higher cone, of (H+) because it ionises completely in aqueous solution
whereas CH3COOHdoes not as it is weak acid.
21.Which gas is generally liberated when a dilute solution of hydrochloric acid reacts
with an active metal?
Answer.Hydrogen gas is liberated when active metal reacts with dilute hydrochloric acid
4.(a) Define olfactory indicators. Name two substances which can be used as olfactory
indicator.
(b) Choose strong acids from the following:
CH3COOH, H2SO4, H2CO3, HNO3
Answer.
(a) Those substances whose smell (odour) changes in acidic or basic solution are called
olfactory indicators, e.g. onion and vanilla.
(b) H2SO4 and HNO3 are strong acids.
5.A white coloured powder is used by doctors for supporting fractured bones.
(a) Write chemical name and formula of the powder.
(b) When this white powder is mixed with water a hard solid mass is obtained. Write
balanced chemical equation for the change.
Answer.
6.Explain the action of dilute hydrochloric acid on the following with chemical equation:
(i) Magnesium ribbon (ii) Sodium hydroxide (iii) Crushed egg shells
Answer.
8.(a) Write the chemical formula of hydrated copper sulphate and anhydrous copper
sulphate. Giving an activity illustrate how these are inter convertible.
(b) Write chemical names and formula of plaster of paris and gypsum.
Answer.
(a)CuSO4.5H2O is hydrated copper sulphate. CuSO4 is anhydrous copper sulphate.
Aim: To show crystalline salts contain water of crystallization.
Material Required: CuSO4.5H2O (Blue vitriol), boiling tube, burner, cork,
delivery tube, test tube, clamp stand.
Procedure: 1.Take 2g of CuSO4.5H2O in a boiling tube fitted in a clamp stand.
2.Observe its colour. Fit it with cork and delivery tube bent at two right angles which dips into a
test tube.
3.Heat crystals in boiling tube.
4.Observe vapours being condensed in test tube.
5.Cool the crystals and add few drops of water into it.
Observation:Water vapours get condensed in a test tube and colour
of blue crystals changes into white. On adding water to anhydrous copper sulphate it changes
into blue again.
Chemical Reaction :
Conclusion : Crystalline substances have water of crystallization which are lost on
heating. When we add water inCuSO4till a saturated solution is formed. On cooling, it gets
converted into CuSO4.5H2Ocrystals and it shows that both are inter convertible.
9.(a) State the chemical properties on which the following uses of baking soda are based:
(i) as an antacid
(ii) as a soda acid fire extiguisher
(iii) to make bread and cake soft and spongy.
Answer.
(b) How is washing soda is obtained from baking soda? Write balanced chemical equation.
(a) (i) It is weakly basic in nature and naturalize hyperacidity.
(ii)It liberates CO2 with H2SO4, which extinguish fire.
(iii) It liberates CO2 on heating which makes bread and cake soft and sponge.
11.A student detected the pH of four unknown solution A, B, C and D as follows 11, 5, 7
and 2. Predict the nature of the solution.
Answer.A is basic ‘B’ is acidic ‘C’ is natural and ‘D’ is strongly acidic.
14. How will you test for the gas which is liberated when hydrochloric acid reacts with an
active metal?
Answer. Bring a burning matchstick near the gas. It burns with ‘pop’ sound showing that it is
hydrogen.
15.(a) Write the name given to bases that are highly soluble in water. Give an example.
(b) How is tooth decay related to pH? How can it be prevented?
(c) Why does bee sting cause pain and irritation? Rubbing of baking soda on the sting
area gives relief. How?
Answer.(a) Alkali, e.g. NaOH (Sodium hydroxide).
(b) Lower the pH, more will be tooth decay. Acid reacts with Ca3(PO4)2 and cause tooth decay.
It can be prevented by brushing teeth after every meal.
(ic) It is due to formic acid. Sodium hydrogencarbonate (Baking soda) neutralises formic acid
giving relief.
16. A white powder is added while baking breads and cakes to make them soft and fluffy.
Write the name of the powder. Name its main ingredients. Explain the function of each
ingredient. Write the chemical reaction taking place when the powder is heated during
baking.
Answer. Baking powder.
It consist of sodium hyrogencarbonate and tartaric acid.
Sodium hydrogencarbonate gives CO2 which makes cake soft and fluffy. Tartaric acid
neutralizes the bitterness due to sodium carbonate produced.
17 “Sodium hydrogencarbonate is a basic salt”. Justify the statement. How is it
converted into washing soda? Explain.
Answer.Sodium hydrogencarbonate is a salt of sodium hydroxide (strong base) and carbonic
acid (weak acid).
It is basic salt. It is converted into washing soda by heating followed by crystallization.
18.Describe an activity with diagram to illustrate that the reaction of metal carbonates
and metal bicarbonates with acids produces carbon dioxide. Write the relevant equations
of all the reactions that take place. Name any two forms in which calcium carbonate is
found in nature.
Answer.
Aim: To show acid reacts with metal carbonate to liberate carbon dioxide,
Material Required: CaCO3(marble chips), Woulfe-bottle, thistle funnel, dil. HCl, gas jar,
matchbox, delivery tube bent at two right angles, lime water.
Procedure:
1.Take marble chips in a Woulfe-bottle.
2.Set the apparatus as shown in diagram.
Conclusion: Metal carbonates react with dilute acids to liberate carbon dioxide. Limestone,
chalk, marble are different forms of calcium carbonate. All metal carbonates and hydrogen
carbonates react with acids to form corresponding salts, water and carbon dioxide.
19.(a) Identify the acid and the base whose combination forms the common salt that you
use in your food. Write its formula and chemical name of this salt. Name the source from
where it is obtained.
(b) What is rock salt? Mention its colour and the reason due to which it has this colour.
(c) What happens when electricity is passed through brine? Write the chemical equation
for it.
Answer.
(a) HCl is acid and NaOH is base whose combination forms the common salt. Its formula is
NaCl (Sodium chloride). It is obtained from sea water.
(b) Rock salt is the common name for the mineral “halite”. Its chemical formula is NaCl.
It may be white or light blue or yellow depending upon impurities present in it.
20.(i) Explain why is hydrochloric acid a strong acid and acetic acid, a weak acid. How
can it be verified?
(ii) Explain why aqueous solution of an acid conducts electricity.
(iii) You have four solutions A, B, C and D. The pH of solution A is 6, B is 9, C is 12 and D
is 7,
(a) Identify the most acidic and most basic solutions.
(b) Arrange the above four solutions in the increasing order of H+ ion concentration.
(c) State the change in colour of pH paper on dipping in solution C and D.
Answer.
(i) HCl is completely ionised in aqueous solution whereas acetic acid is partially ionised in
aqueous solution. HCl gives dark red colour with pH paper whereasCH3COOH gives orange
colour
(ii) It is because acid ionises in aqueous solution and these ions conduct electricity. (Hi) (a) ‘A’ is
most acidic and ‘C’ is most basic.
(b) C (10-12) < B (10-9) < D (10-7) < A (10-6)
(c) pH paper will become blue in ‘C’ and green in ‘D’.
21.(i) Dry pellets of a base ‘X’ when kept in bpen absorbs moisture and turns sticky. The
compound is also formed by chlor-alkali process. Write chemical name and formula of X.
Describe chlor-alkali process with balanced chemical equation. Name the type of reaction
occurs when X is treated with dilute hydrochloric acid. Write the chemical equation. (ii)
While diluting an acid, why is it recommended that the acid should be added to water and
not water to the acid?
Answer.
(i) X is sodium hydroxide, NaOH.
When sodium chloride solution (brine solution) is electrolysed, sodium hydroxide solution is
formed. H2 and Cl2 gases are liberated. This is chlor-alkali process.
The above reaction is neutralization reaction.
(ii)It is because process is highly exothermic. If water is added to acid, bottle of acid will break.
22. A student dropped few pieces of marble in dilute hydrochloric acid, contained in a
test-tube. The evolved gas was then passed through lime water. What change would be
observed in lime water? What will happen if excess of gas is passed through lime water?
With the help of balanced chemical equations for all the changes explain the
observations.
Answer.
23. (a) Identify the compound of calcium which is yellowish white powder and is used for
disinfecting drinking water. Write its chemical name and formula. How is it
manufactured? Write the chemical equation for the reaction involved. Also list two other
uses of the compound.
(b) Write the balanced chemical equation qf chlor-alkali process.
Answer. (a) The compound is bleaching powder (CaOCl2). Its chemical name is calcium
oxychloride. It is manufactured by reaction of solid slaked lime with dry chlorine gas.
24. (a) Mention the pH range within which our body works. Explain how antacids
give relief from acidity. Write the name of one such antacid.
(b) Fresh milk has a pH of 6. How does the pH will change as it turns to curd? Explain
your answer.
(c) A milkman adds a very small amount of baking soda to fresh milk. Why does this milk
take a longer time to set as curd?
(d) Mention the nature of toothpastes. How do they prevent tooth decay?
Answer.
(a) Our stomach has pH equal to 2. Antacids neutralizes excess of acid in our body and gives
relief from hyperacidity. Sodium hydrogencarbonate is one of such antacid.
(b) pH will decrease as it turns to curd because curd is acidic due to the presence of lactic acid.
(c) It takes longer time to set as curd as bacteria do not work well in presence of sodium
hydrogencarbonate, i.e. fermentation will take place slowly.
(d) Toothpastes are basic in nature. They neutralize the acid formed in mouth which causes
tooth decay.
25. (a) Crystals of a substance changed their colour on heating in a closed test
tube but regained it after sometime when they were allowed to cool down. Name the
substance and write its formula and explain the phenomenon involved.
(b) Name the compound whose one formula unit is associated with 10 water molecules.
How is it prepared? Give equations of related reactions. Give two uses of the compound.
Answer.
(a) CuSO4.5H2O is a blue crystalline solid. It becomes dirty white on heating due to loss of water
molecules and it becomes amorphous.
It regains its colour by absorbing water from atmosphere and becomes blue in colour.
Uses:
(i) It is used in the production of washing powder.
(ii) It is used for the manufacture of glass.
26. (a) Explain the following chemical properties of acids with the help of balanced
chemical equations only.
(i) When an acid reacts with a metal carbonate.
(ii)When an acid reacts with a metal bicarbonate.
(iii) When an acid reacts with a metal oxide.
(b) You are given three solutions A, B and C with pH values 2, 10 and 13 respectively.
Write which solution has more hydrogen ion concentration among the three and state the
nature ‘acidic or basic’ of each solution.
Answer.
27.(a) A metal compound ‘X’ reacts with dil. H2SO4 to produce effervescence, The gas
evolved extinguishes a burning candle. If one of the compound formed is calcium
sulphate, then what is ‘X’ and the gas evolved? Also, write a balanced chemical equation
for the reaction which occurred.
(b) (i) Name one antacid. How does it help tq relieve indigestion in stomach?
(ii) A farmer treats the soil with quicklime or calcium carbonate. What is the nature of
soil? Why does the farmer treat the soil with quicklime?
Answer.
(b) (i) NaHCOs is antacid. It neutralizes excess of acid formed in the stomach.
(ii) The soil is acidic in nature. The farmer wants to make it neutral by adding quicklime which is
good for crops.
28. What are strong and weak acids? In the following list of acids, separate strong acids
from weak acids.
Hydrochloric acid, citric acid, acetic acid, nitric acid, formic acid, sulphuric acid.
Answer. Strong acids are those acids which are completely ionised in aqueous solution. Weak
acids are those which do not ionise completely in aqueous solution. Strong acid:
HCl, HNO3,H2SO4 Weak acid: Citric acid, acetic acid, formic acid.
29. State the chemical name of Plaster of Paris. Write a chemical equation to show the
reaction between Plaster of Paris and water.
Answer. Calcium sulphate hemihydrate.
30.State in brief the preparation of washing soda from baking soda. Write balanced
chemical equation of the reaction involved.
Answer. Sodium hydrogencarbonate (baking soda) on heating gives sodium carbonate which
on recrystallisation gives washing soda
31, What is the colour of FeSO4.7H2O crystals? How does this colour change upon
heating? Give balanced chemical equation for the changes.
Answer. Pale green is the colour of FeSO4.7H2O crystals. It becomes dirty white on heating.
● Sonorous
● High melting and boiling points (except Caesium (Cs) and Gallium (Ga)
● Dense, (except alkali metals). Osmium - highest density and lithium - least density
● Lustrous
Non-Metals
Non metals are those elements which do not exhibit the properties of metals.
Brittle
Non-malleable
Non-ductile
Non-sonorous
Bad conductors of heat and electricity
Chemical Properties
● Alkali metals (Li, Na, K, etc) react vigorously with water and oxygen or air.
● Na and K are kept immersed in kerosene oil as they react vigorously with air and catch
fire.
● Mg, Al, Zn, Pb react slowly with air and form a protective layer that prevents corrosion.
Some metallic oxides get dissolved in water and form alkalis. Their aqueous solution turns red
litmus blue.
Reactivity Series
The below table illustrates the reactivity of metals from high order to low order.
Symbol Element
Ba Barium
Ca Calcium
Na Sodium
Mg Magnesium
Al Aluminium
Zn Zinc
Fe Iron
Ni Nickel
Sn Tin
Pb Lead
H Hydrogen
Cu Copper
Hg Mercury
Ag Silver
Au Gold
Pt Platinum
Reaction of Metals with Water or Steam
Only Mg and Mn, react with very dilute nitric acid to liberate hydrogen gas.
Displacement Reaction
A more reactive element displaces a less reactive element from its compound or solution.
Metals lose electrons and become positive ions. So, they are called electropositive elements. E.g.
- The atomic number of sodium is 11, its electronic configuration is 2,8,1. It has 1 valence electron.
It loses 1 electron and forms a sodium ion i.e. Na+
Na Na+ + 1 e-
EC = 2,8,1 2,8
Mg Mg2+ + 2 e-
EC = 2,8,2 2,8
Non-metals gain electrons and become negative ions. So, they are called electro- negative
elements. Eg- The atomic number of chlorine is 17, its electronic configuration is 2,8,7. It has 7
valence electron. It gains 1 electron and forms a chloride ion i.e. Cl-
Cl + 1 e- Cl-
EC = 2,8,7 2,8,8
O + 2e- O2-
EC = 2,6 2,8
Formation of sodium chloride molecule : The atomic number of Na is 11, its electronic
configuration is 2,8,1. It has 1 valence electron, it loses 1 electron to form Na+ ion. The atomic
number of Cl is 17, its electronic configuration is 2,8,7. It has 7 valence electrons, it gains 1
electron to form Cl ion.
Then the attraction between the Na+ ion and Cl- ion results in the formation of sodium chloride
(NaCl) molecule.
Formation of Magnesium chloride molecule : The atomic number of Mg is 12, its electronic
configuration is 2,8,2. It has 2 valence electrons, it loses 2 electrons to form Mg2+ ion . The atomic
number of Cl is 17, its electronic configuration is 2,8,7. It has 7 valence electrons, it gains 1
electron to form Cl ion.
Then the attraction between Mg2+ ion and 2Cl ions results in the formation of Magnesium chloride
(MgCl2) molecule.
Ionic compounds (Electrovalent compounds): Ionic compounds are compounds formed by the
transfer of electrons from a metal to a non-metal.
They are formed by the transfer of electrons and are made up of ions.
They are soluble in water but insoluble in organic solvents like petrol, kerosene.
Ans:- Sodium
Ans:- Silver
Ans:- Iron
Ans.:- Gold
Ans:- Gallium
Ans:- Basic
Ans:-Acidic
Q10:-Which non-metal conduct electricity?
Ans:- Iodine
Q.12:- Why metals are hard and have high melting point?
Q.15:- Name the green coloured compound which appears on the surface of copper utensils?
Q.16:- Why the item made of silver turns black when exposed to air?
Ans:- Oxides which react with both acids as well as bases to produce salt and water are called
amphoteric oxides .for example:- Al2O3 , ZnO
Q.2:- Name two metals that react with dil.HNO3 to evolve H2 gas ?
Q.3:- Why metals like potassium and sodium catch fire when treated with water?
Ans:- The reaction between sodium and water is so violent that the H2 gas released catches fire
.
Ans:- because sodium react with air to form Na2O (sodium oxide).
Q.5:- Which gas is produced when dil. HCl is added to a reactive metal? Write the chemical
reaction when iron reacts with dil. H2SO4?
Ans:- hydrogen gas is produce when dil. HCl is added to a reactive metal.
Q.6:- What would you observe when zinc is added to a solution of iron(II) sulphate ? write the
chemical reaction that takes place.
Ans:- The solution of iron(II)sulphate slowly turns to colourless and grey coloured layer of Fe is
deposited on the surface of zinc metal.
Ans:- Ionic solids have crystalline structure in which there is strong interionic attraction. So large
amount of energy is needed to overcome this force of attraction.
Q.14:- Name the conditions which are essential for corrosion.
Ans:- Galvanisation is a method of protecting steel and iron from rusting by coating them with a
thin layer of Zinc.
Ans. The process of forming a thick oxide layer of aluminium oxide that makes it resistant to
further corrosion.
Ans. Aqua regia is a mixture of conc. HCl and conc. HNO3 in the ratio 3:1. It can dissolve gold
and platinum.
Q.1:- Write suitable example, explain how a metal low in the activity series can be extracted?
Ans:- Metals low in the activity series are less reactive. The oxides of these metals can be reduced
to metals by heating alone. For example, extraction of Mercury (Hg) from Cinnabar (HgO).
Ans:- (i) Ionic compounds have high melting points. (ii) Ionic compounds are soluble in water. (iii)
Ionic compounds conduct electricity in aqueous and molten state.
MCQ for practical skills
Ans:- (III)
2. SO2
Ans:- (II)
3. Metal A when dipped in solution of salt of metal B ,then metal B is displaced . this shows that
Ans:- (I)
4. When iron nail is dipped in aqueous solution of copper sulphate , it is observed that
Ans:- (i)
5. Which of of the following metals will not react with oxygen, even when heated very strongly in
air?
(a) Zn (b) Al (c) Ag (d) Fe
Ans- (c) Ag
Ans- (b) CO
HOTS:
1. A yellow coloured powder X is soluble in carbon disulphide. It burns with a blue flame forming
suffocating smelling gas which turns moist blue litmus red. Identify X and give its chemical
reaction. State whether it is a metal or a non-metal.
Ans: X is sulphur.
S + O2 SO2
It is a non metal.
2. An element reacts with oxygen to form an oxide which dissolves in dilute hydrochloric acid. The
oxide formed also turns a solution of red litmus blue. Is the element a metal or non-metal? Explain
with the help of a suitable example.
Ans: It is a metal.
4. Ritika was given Mg, Zn, Fe and Cu metals. He put each of them in dil.HCl contained in
different test tubes . Identify which of them:
(iv) will be displaced from its salt solution by all other metals.
5. A , B and C are three elements which undergo chemical reactions according to following
equations:
a) A2O3 + 2B B2O3 + 2A
b) 3CSO4 + 2B B2 (SO4)3 + 3C
c) 3CO + 2A A2SO3 + 3C
Ans: i) Most reactive element is B as it has replaced both A and C from their compounds.
6. An element E combines with O2 to form an oxide E2O, which is a good conductor of electricity.
Answer the following:
ii) Write the formula of the compound formed when it combines with Chlorine?
Ans: i) Valency of the element E is 1. This means that it has only one electron in the valence
shell.
1: Carbon can reduce copper oxide to copper but not calcium oxide to calcium. Why?
Ans: Carbon is a strong reducing agent so it can reduce copper oxide but calcium is much more
reactive than copper and has greater affinity for oxygen than carbon has. So it cannot reduce
calcium oxide to calcium.
2. A yellow coloured powder `X` is soluble in carbon disulfide. It burns with a blue flame forming
suffocating smelling gas which turns moist blue litmus red. Identify `X` and gives chemical
reaction.Identify it is metal or nonmetal.
S + O2 ---> SO2
It is non metal.
3. Nikita took Zn, Al, Cu, Fe, Mg, Na metals & put each metal in cold water and then hot water.
She reacted the metal with steam
Ans.3 (i) Na (ii) Al, Zn, Fe (iii) Mg (iv) Na>Mg> Al > Zn > Fe > Cu
4. A student was given Mg, Zn, Fe, and Cu metals. He put each of them in dil HCl contained in
different test tubes. Identify which of them
(iv) will be displaced from its salt solution by all other metals.
5. A metal `X` is found in the form of filings which burns vigorously when sprinkle on flame. When
these filings are treated with sulphur a black colured compound `Y` is formed which is not attracted
by magnet. `X` reacts with dil HCl to liberate hydrogen gas. Identify `X`, `Y``. Write the reaction
involved.
Ans5 : Fe + S -> Fe S
6. A, B and C are 3 elements which undergo chemical reactions according to following equations:
Ans.6 i) Most reactive element is B as it has replaced both A and C from their compounds
7: Give reasons
Ans7 i) These metals are very reactive so they can combine with moist air and oxygen vigorously
with liberation of large amount of heat that is why they are kept in oil.
ii) Pure gold is very soft it is therefore not suitable for making jewelry . It is alloyed with either silver
or copper to make it hard.
iii) When a metal is heated, its atom gain energy and vibrate more vigorously. This energy is
transferred to the electrons, which can move through the metal. They transfer their energy to other
electrons and atoms.
8 : Why does aluminum not react with water under ordinary condition?
Ans: Aluminum forms a thin tough layer of oxide on its surface. this oxide layer forms a protective
coating on the metal and prevents it from further attack of water.
9 Metal sulphides occur mainly in rocks and the metal halides occur mostly in seas and lakes.
What could be the reason for this?
Ans: Most of the metal sulphides are insoluble in water where as metal halides are generally
soluble. The metal halides( NaCl , MgCl2 etc) are washed away with rain or river water in
dissolved state and so the halide ores occur in lakes and seas.
10 Give the reason why copper is used to make hot water tanks but steel is not?
Ans: This is because iron present in steel reacts with steam to form ferric oxide whereas copper
has no action with water. As a result of it , the body of steel tank becomes weaker and weaker in
case of iron and not in case of copper.
MCQ Questions for Class 10 Science Carbon and Its Compounds with Answers:
1. Which of the following structures correctly represents the electron dot structure of a
chlorine molecule?
Answer: (a)
Explanation: In an electron dot structure of a molecule there must be shown eight
electrons (in the form of dots or crosses) around each element of the molecule, to
represent the complete octet of the element.
2. While cooking, if the bottom of the vessel is getting blackened on the outside, it means that:
a) The food is not cooked completely
b) Isomerisation
c) Superposition
d) Halogenation
b) 60
c) 90
d) 120
Answer: (b) 60
Explanation: Buckminsterfullerene is a molecule of carbon in the form of a hollow sphere
consisting of 60 C-atoms and is having the formula C60.
8. Which of the followings is the major constituent of the liquefied petroleum gas?
a) Methane
b) Ethane
c) Propane
d) Butane
b) Ketone
c) Carboxylic acids
d) Alcohol
c) Lead
d) Graphite
Explanation: Pencil lead is formed of graphite. Graphite is an allotropic form of carbon in which
each carbon atom is joined to three others, forming layers:
These layers are put together by weak van der Waals forces which enable the layers to slide
over each other, making graphite soft and slippery. So graphite is used as pencil ‘lead’. As the
pencil moves across the paper, layers of graphite rub off leaving the dark marks on paper.
11. Which of the following substance produces brisk effervescence with baking soda solution?
a) Ethanoic acid
b) Table salt
c) Vinegar
d) Sunflower oil
Answer
Answer: b
Answer
Answer: c
Answer
Answer: b
Answer
Answer: d
16. Identify ‘A’ in the following reaction:
CH3COOH + Na2CO3 → A + CO2 + H0O
(a) CH3COONa
(b) CH2(Na)COOH
(c) NaOH
(d) NaHCO3
Answer
Answer: a
Answer
Answer: d
18. A hydrocarbon has four carbon atoms. Give its molecular formula if it is an alkene.
(a) C4H10
(b) C4H8
(C) C4H6
(d) C4H4
Answer
Answer: b
2. Covalent bonds are formed by the ………. of electrons between two atoms so that both can
achieve a
completely filled outermost shell.
3. The unsaturated hydrocarbons which contain one or more double bonds are called
ANSWERS
1. Carbon
2. sharing
3. alkenes
4. CnH2n-2
5. homologous series
6. Esters
Extra Questions for Class 10 Science Chapter 4 Carbon and its Compounds with
Answers Solutions
Extra Questions for Class 10 Science Chapter 4 Very Short Answer Type
Question 1.
Draw the electron dot notation of O2 molecule.
Answer:
Question 2.
Name a molecule that has triple bond.
Answer:
Nitrogen (N2).
Question 3.
Name the hardest substance which is an allotrope of carbon.
Answer:
Diamond.
Question 4.
Name the allotrope of carbon which have the structure of C-60.
Answer:
Fullerenes.
5. Name the unique ability of carbon to form bonds with other atoms of carbon.
Answer:
Catenation.
Question 6.
Mention the two characteristic features seen in carbon.
Answer:
Tetravalency and catenation.
Question 7.
Name the first organic compound synthesised by Wohler.
Answer:
Urea.
Question 8.
Write the general molecular formula of alkane series.
Answer:
CnH2n+2
Question 9.
How many covalent bonds are there in a molecule of ethane, C2H6?
Answer:
Seven (7)
Question 10.
Write the name and formula of the 2nd member of homologous series having general formula
CnH2n.
Answer:
CnH2n : Alkene
2nd member = C3H6 (propene)
Question 11.
Write the molecular formula of an alkyne containing 10 atoms of hydrogen.
Answer:
C6H10.
Question 12.
Which two of the following compounds could belong to the same homologous series?
C2H6O2, C2H6O, C3H28, CH4O
Answer:
CH4O and C2H6O (General formula CnH2n+1. OH)
Question 13.
Which of the following molecule is called buckminsterfullerene?
C90, C60, C70, C120
Answer:
C60.
Question 14.
Name the gas evolved when sodium carbonate and bicarbonate is added to ethanoic acid.
Answer:
Carbon dioxide (CO2)
Question 15.
Among CH4, C2H6 and C4H10 which is expected to show isomerism?
Answer:
C4H10.
Question 16.
Write the formula and name of next homologue of CH3COCH3.
Answer:
CH3CH2COCH3, Butanone.
Question 17.
Why do alkanes burn with a blue flame?
Answer:
Question 18.
Draw the electron dot structure of O2 and N2 molecules.
Answer:
Question 19.
Give the general formula of alkanes. Write the name, structural formula and physical state of the
compound containing:
(i) 3-carbon atoms
(ii) 8-carbon atoms.
Answer:
(a) General formula of alkanes is CnH2n+2
n = 1, 2, 3…
(i) Propane, CH3—CH2—CH3
or
Propane is a gas.
(ii) CH3—CH2—CH2—CH2—CH2—CH2—CH2—CH3
or
Octane is a liquid
Question 20.
Why does carbon form compounds mainly by covalent bonding?
Answer:
Carbon atoms have 4 valence electrons in their valence shell, it needs to gain or lose 4
electrons to attain the noble gas configuration.
(i) It could gain four electrons forming C4- anion. But it would be difficult for the nucleus with six
protons to hold on to ten electrons.
(ii) It could lose four electrons forming C4+ cation. But it would require a large amount of energy
to remove four electrons from its outermost shell.
Therefore, carbon shares its valence electrons to complete its octet with other atoms to form
covalent bonds.
Question 21.
Draw the structures of diamond and graphite.
Answer:
In diamond, each carbon atom is bonded to four other carbon atoms forming a rigid three
dimensional structure.
In graphite, each carbon atom is bonded to three other carbon atoms in the same plane giving a
hexagonal array. One of these bonds is a double bond.
Ch 5 Periodic Classification of Elements
Answer
Answer: b
Answer
Answer: b
3. In Mendeleev’s Periodic Table, gaps were left for the elements to be discovered later. Which
of the following elements found a place in the Periodic Table later?
(a) Chlorine
(b) Silicon
(c) Oxygen
(d) Germanium
Answer
Answer: d
Answer
Answer: a
5. The properties of eka-aluminium predicted by Mendeleev are the same as the properties of
later discovered element:
(a) Scandium
(b) Germanium
(c) Gallium
(d) Aluminium
Answer
Answer: c
6. An atom of an element has the electronic confi-guration 2,8,2. To which group does it
belong?
(a) 4th group
(b) 6th group
(c) 3rd group
(d) 2nd group
Answer
Answer: d
Answer
Answer: b
8. Where would you locate the element with electronic configuration 2, 8 in the Modern Periodic
Table?
(a) Group 8
(b) Group 2
(c) Group 18
(d) Group 10
Answer
Answer: c
9. Element ‘X’ forms a chloride with the formula XCl2, which is a solid with high melting point. X
would most likely be in the same group of the periodic table as:
(a) Si
(b) Mg
(c) Al
(d) Na
Answer
Answer: b
Element A B C
Atomic number 2 10 5
(a) A, B
(b) B, C
(c) C, A
(d) A, B and C
Answer/ Explanation
Answer: b
Explaination: Reason. B= 10 (2, 8), C = 5 (2, 3) Both have 2 periods.
11. Carbon belongs to the second period and Group 14. Silicon belongs to the third period and
Group 14. If atomic number of carbon is 6, the atomic number of silicon is
(a) 7
(b) 14
(c) 24
(d) 16
Answer
Answer: b
12. Pick out the chemically most reactive elements from the given triads.
Li, Na, K F, Cl, Br
(a) Li and F
(b) Li and Br
(c) K and F
(d) K and Br
Answer
Answer: c
13. What is the atomic number of element of period 3 and group 17 of the Periodic Table?
(a) 10
(b) 4
(c) 17
(d) 21
Answer
Answer: c
14. Which one of the following statements is not correct about the trends in the properties of the
elements of a period on going from left to right?
(a) The oxides become more acidic
(b) The elements become less metallic
(c) There is an increase in the number of valence electrons
(d) The atoms lose their electrons more easily
Answer
Answer: d
15. The elements A, B and C belong to groups 1, 14 and 17 respectively of the Periodic Table.
Which two elements will form ionic compounds?
(a) A and B
(b) A and C
(c) B and C
(d) None
Answer
Answer: b
16. An element X from group 2 of the Periodic Table reacts with Y from group 17 to form a
compound. Give the formula of the compound.
(a) XY2
(b) XY
(c) X2Y
(d) (XY)2
Answer
Answer: a
17. A metal ‘M’ is in the first group of the Periodic Table. What will be the formula of its oxide?
(a) MO
(b) M2O
(C) M2O3
(d) MO2
Answer
Answer: b
18. Name the neutral atom in the Periodic Table which has the same number of electrons as K+
and Cl-.
(a) Helium
(b) Argon
(c) Neon
(d) Krypton
Answer
Answer: b
19. An element X combines with oxygen to form an oxide XO. This oxide is electrically
con¬ducting. Write the formula of the compound formed when X reacts with chlorine.
(a) XCl3
(b) XCl
(c) XCl2
(d) XCl5
Answer
Answer: c
20. An element X has mass number 40 and contains 21 neutrons in its atom. To which group of
the Periodic Table does it belong?
(a) Group 1
(b) Group 4
(c) Group 2
(d) Group 3
Answer/ Explanation
Answer: a
Explaination: Reason. e = 19 (2, 8, 8,1)
21. Consider the following elements
20Ca, 8Or 18Ar, 16S, 4Be, 2He
Which of the above elements would you expect to be in group 16 of the Periodic Table?
(a) 20Ca and 16S
(b) 20Ca and 8O
(c) 18Ar and 16S
(d) 8O and 16S
Answer
Answer: d
22. An element ‘A’ belongs to the third period and group 16 of the Periodic Table. Find out the
valency of A.
(a) Valency = 6
(b) Valency = 2
(c) Valency = 1
(d) Valency = 3
Answer
Answer: b
23. Which one of the following statements is not correct about the trends in the properties of the
elements of a group on going down in a group?
(a) The chemical reactivity of metals increases.
(b) The metallic character of elements increases.
(c) The size of the atom increases.
(d) The valence electrons increase.
Answer
Answer: d
24. Which of the following set of elements is written in order of their increasing metallic
character?
(a) Na Li K
(b) C Q N
(c) Mg Al Si
(d) Be Mg Ca
Answer
Answer: d
25. The atom of an element has electronic con-figuration 2, 8, 7. To which of the following
elements would it be chemically similar?
(a) N(7)
(b) P(15)
(c) Na(11)
(d) F (9)
Answer/ Explanation
Answer: d
Explaination: Reason. Both have same number of valence electrons
Answers
1. Dobereiner
2. atomic mass
3. atomic no.
4. (a) increases
(b) decreases
(c) decreases
5. position
6. 17
7. 12th
8. Period
9. increases, decreases
10. right
Extra Questions for Class 10 Science Chapter 5 Periodic Classification of
Elements with Answers:
Question.1 Lithium, sodium and potassium form a Dobereiner’s triad. The atomic masses
of lithium and potassium are 7 and 39 respectively. Predict the atomic mass of sodium.
Answer.
Question.2 Chlorine, bromine and iodine form a Dobereiner’s triad. The atomic masses of
chlorine and iodine are 35.5 and 126.9 respectively. Predict the atomic mass of bromine.
Answer.
Question.3 Why was the system of classification of elements into triads not found
suitable?
Answer. It is because all the elements discovered at that time could not be classified into triads.
Question.7 the formula of its oxide An element ‘M’ has atomic number 12.
(a) Write its electronic configuration.
(b) State the group to which ‘M’ belongs.
(c) Is ‘M’ a metal or a non-metal?
(d) Write.
Answer.
Question.10 The formula of magnesium oxide is MgO. State the formula of barium nitrate
and barium sulphate, if barium belongs to the same group as magnesium.
Answer.
Question.12 Why do all the elements of the (a) same group have similar properties, (b)
same period have different properties?
Answer.
(a) Elements of same group have similar properties due to same number of valence electrons,
therefore, they have same valency.
(b) Elements of same period have different properties as they differ in number of valence
electrons.
(a) To which group of the periodic table does element ‘E’ belong?
(b) To which period of the periodic table does element ‘E’ belong?
(c) State the number of valence electrons present in element ‘E’.
(d) State the valency of the element ‘E’.
Answer.
(a) ‘E’ belongs to group 16.
(b) It belongs to 3rd period.
(c) It has 6 valence electrons.
(d) Its valency is equal to 2.
Question.15 The electronic configuration of two elements ‘A’ and ‘B’ are 2, 8, 3 and 2, 8, 7
respectively. Find the atomic number of these elements. State the nature and formula of
the compound formed by the union of these two elements.
Answer.
Write the symbol of the element which belongs to (o) group 13, (b) group 15, of the
periodic table. State the period of the periodic table to which these elements belong. Give
reason for your answer.
Answer.
(a) A belongs to group 13 because its electronic configuration is 2, 3, ie. it has 3 valence
electrons.
(b) ‘B’ belongs to group 15 because its electronic configuration is 2, 5, ie. it has 5 valence
electrons.
They belong to 2nd period as they ‘ both have two shells.
Question.17 Write the atomic number of these elements. What will be formula of the
compound formed and the nature of bond between them when these two elements
chemically combine together?
Answer.
‘A’ has atomic number 17. Its electronic configuration is 2, 8, 7. Its valency is equal to 1. number
20. Its electronic configuration is 2, 8, 8, 2. Its
‘B’ has atomic valency is 2.
Write the symbol of the element which belongs to (a) group 1, (b) group 14, of the
periodic table. State the period of the periodic table to which these elements belong.
State reason to support your answer.
Answer.
(a) A belongs to group 1.
(b) B belongs to group 14.
These elements belong to second period because these elements have two shells. A has
electronic configuration 2, 1 and has one valence electron so, belongs to group 1. ‘B’ has
electronic configuration 2, 4 and has four valence electrons so, belongs to group 14 and period
2. ‘C’ has electronic configuration 2, 7 and has one valence electron. All of them contain two
shells and so belong to second period
Question.19The elements of the second period of the Periodic Table are given below:
Li Be B C N O F
(a) Give reason to explain why atomic radii decrease from Li to F.
(b) Identify the most
(i) metallic and
(ii)non-metallic element.
Answer.
(a) It is because nuclear charge increases due to increase in atomic number, therefore, force of
attraction between nucleus and valence electrons increases, i.e. effective nuclear charge
increases, hence atomic radii decrease from Li to F.
(b) (i) Most metallic element is ‘Li’ as it
can lose electrons easily due to larger atomic size.
(ii) Most non-metallic element is ‘F’ because it can gain electrons easily due to smallest atomic
size.
Question.20The elements of the third period of the Periodic Table are given below:
Question.23 How does the electronic configuration of an atom of an element relate to its
position in the modern periodic table? Explain with one example.
Answer. The position of element depends upon number of valence electrons which depend
upon electronic configuration. Those elements which have same valence electrons, occupy
same group.
Those elements which have one valence electron belong to group 1.
Elements with two valence electrons belong to group 2.
Period number is equal to number of shells.
If valence electrons are equal to 1, it belongs to group 1. If it has 2 shells, it belongs to second
period, e.g. if element ‘X’ has atomic number 11, its electronic configuration is 2, 8,1. It has one
valence electron, it belongs to group 1 and it has three shells therefore, it is in third period.
Question.24 The atomic numbers of three elements, X, Y and Z are 9,11 and 17
respectively. Which two of these elements will show similar chemical properties? Why?
Answer. Electronic configuration of X, Y and Z will be:
X(9) : 2, 7
Y(11) : 2, 8, 1
Z(17) : 2, 8, 7
X and Z will show similar chemical properties due to same number of valence electrons.
Question.25 On the basis of electronic configuration, how will you identify the first and
the last element of a period?
Answer. First element has 1 valence electron and last element has 8 valence electrons.
Number of shells remain the same in the same period.
Question.26 In the modern periodic table, the element Calcium (atomic number = 20) is
surrounded by elements with atomic numbers 12, 19, 21 and 38. Which of these elements
has physical and chemical properties resembling those of Calcium and why?
Answer. Elements with atomic number 12, 38 resemble calcium in physical and chemical
properties because they have same number of valence electrons and belong to same group 2.
Mg(12) : 2, 8, 2
Ca(20) : 2, 8, 8, 2
Sr(38) : 2, 8, 18, 8, 2
Question.27. How does the metallic character of elements change along a period of
the periodic table from the left to the right and why?
Answer. The metallic character goes on decreasing along a period from left to right because
atomic size goes on decreasing therefore, tendency to lose electrons decreases.
Question.29 In the periodic table, how does the tendency of atoms to lose electrons
change on going from
Answer.
Answer.
1. Elements in a group have same number of valence electrons and same valency therefore
have similar chemical properties.
2. It is because elements of group 1 lose one electron to acquire +1 charge and become
stable.
SHORT ANSWER TYPE QUESTIONS[II] [3 Marks]
Question.31 F, Cl and Br are the elements each having seven valence electrons. Which of
these (a) has the largest atomic radius, (b) is most reactive? Justify your answer stating
reason for each.
Answer.
(a) Bromine has largest atomic radius because it has four shells: 2, 8, 18, 7.
(b) Fluorine is most reactive because it is smallest in size and can gain electron easily.
Question.32 Na, Mg and Al are the elements having one, two and three valence electrons
respectively. Which of these elements (a) has the largest atomic radius, (b) is least
reactive? Justify your answer stating reason for each.
Answer. (a) Na has the largest atomic radius because it has 11 protons and 11
electrons, therefore least effective nuclear charge.
(b) Al is least reactive because it has smallest atomic size due to 13 protons and 13 electrons, it
has greater effective nuclear charge, therefore, cannot lose electrons easily, hence it is least
reactive.
Answer.
(a)
(b)
Question.34.(a) How many periods are there in the Modern Periodic Table of elements?
(b) How do atomic radius, valency and metallic character vary down a group?
(c) How do the atomic size and
metallic character of elements vary as we move from left to right in a period?
Answer.
(a) There are 7 periods.
(b) Atomic radius goes on increasing down the group, valency remains same. Metallic character
increases down the group.
(c) Atomic size decreases along a period from left to right. Metallic character decreases along a
period from left to right.
Question.35 Two elements X and Y belong to group 1 and 2 respectively in the same
period of periodic table. Compare them with respect to:
periodic table from the left to the right and why?
Answer.
1. 6
2. 2
3. 16
4. Non-metal
5. Acidic oxide
6. SCl2is a formula of its chloride.
Question.38 The position of three elements A, B and C in the Periodic Table is shown
below:
Question.39 The position of three elements A, B and C in the Periodic Table is shown
below:
Question.40 What physical and chemical properties of elements were used by Mendeleev
in creating his periodic table? List two observations which posed a challenge to
Mendeleev’s Periodic Law.
Answer. Atomic mass as a physical property and nature and formulae of oxide and hydride
formed, and chemical property was used by Mendeleev.
Following are the two observations which posed a challenge to Mendeleev’s Periodic Law.
(i) Increasing order of atomic weights could not be maintained while matching chemical
properties. Chemical properties do not depend upon atomic mass.
(ii) Isotopes have different atomic mass but same chemical properties.
Question.44 (a) What are ‘groups’ and ‘periods’ in the ‘periodic table’?
(b) Two elements M and N belong to group I and II respectively and are in the same
period of the periodic table. How do the following properties of M and N vary?
Answer.
(a) The vertical columns in the periodic table are called ‘groups’. The horizontal rows in the
periodic table are called ‘periods’.
(b)
Question.46 In the following table, six elements A, B, C, D, E and F (here letters are not
the usual symbols of the elements) of the Modern Periodic Table with atomic numbers 3
to 18 are given:
(a) Which of these halogen ?is (i) a noble gas, (ii) a halogen
(b) If B combines with F, what would be the formula of the compound formed?
(c)Write the electronic configurations of C and E.
Answer.
Question.47 In the following table, are given eight elements A, B, C, D, E, F, G and H (here
letters are not the usual symbols of the elements) of the Modern Periodic Table with the
atomic numbers of the elements in parenthesis.
Answer.
Question.48 (a) Which two criteria did Mendeleev use to classify the elements in his
Periodic Table?
(b) State Mendeleev’s periodic law.
(c) Why could no fixed position be given to hydrogen in Mendeleev’s Periodic Table?
(i) Sizes of their atoms
(ii) Their metallic characters
(iii) Their valencies in forming oxides
(iv) Molecular formulae of their chlorides
(a) The vertical columns in the periodic table are called ‘groups’. The horizontal rows in
the periodic table are called ‘periods’.
(b) (i) ‘M’ and ‘N’ belong to same
period but group I and II. Therefore, ‘N’ will be smaller than ‘M’ as atomic size goes on
decreasing from left to right.
(ii) ‘M’ is more metallic than ‘N’. Metallic character goes on decreasing from left to right
as tendency to lose electrons decreases due to decrease in atomic size.
(iii) Their valencies are 1 and 2 respectively in forming oxides. Valency goes on
increasing first
and then decreases.
(iv) MCI, NCI2 are molecular formulae of their chlorides.
(d) How and why does the atomic size vary as you go
(i) from left to right along a period?
(ii) down a group?
Answer.
(a) (i) Increasing order of atomic mass as physical property and similarities in chemical
properties of elements.
(ii) The formulae and nature of hydrides and oxides formed by elements was treated as basic
chemical property for its classification.
(b) Properties of elements are the periodic functions of their atomic masses.
(c) It is because it resembles both alkali metals as well as halogens.
(d) (i) Atomic size goes on decreasing
from left to right because one proton and one electron is being added successively therefore,
force of attraction between . valence electrons and nucleus increases hence, the atomic size
decreases.
(ii) The atomic size goes on increasing from top to bottom in a group because number of shells
keep on increasing therefore, distance between nucleus and valence electrons increases.
1. To which group or period of the Periodic Table do the listed elements belong?
2. What would be the nature of compound formed by a combination of elements B
and F?
3. Which two of these elements could definitely be metals?
4. Which one of the eight elements is most likely to be found in gaseous state at room
temperature?
5. If the number of electrons in the outermost shell of elements C and G be 3 and 7
respectively, write the formula of the compound formed by the combination of C
and G.
Answer.
1. A and B belong to group 1 and 2 because they form basic oxides. C belongs to group 13
as it has 3 valence electrons. D belongs to group 14 as it forms almost neutral oxide. E
and F belong to group 15 and 16 as they form acidic oxides, G belongs to group 17 as it
has 7 valence electrons and H belongs to group 18. They belong to 3rd period of the
Periodic Table because AG is NaCI, added in a small amount to almost all vegetable
dishes during cooking and Na and Cl belong to 3rd period.
2. Ionic compounds will be formed because ‘B’ is metal and ‘F’ is non-metal. ‘B’ can lose two
electrons and ‘F’ can gain two electrons.
3. A and B are definitely metals as they form basic oxides.
4. G and H are gaseous at room temperature.
5. CG3 is the formula of the compound formed by combination of C and G.
1. To which group or period of the periodic table do the listed elements belong?
2. Which one of the eight elements is likely to be a noble gas?
3. Which one of the eight elements would have the largest atomic radius?
4. Which two elements amongst these are likely to be non¬metals?
5. Which one of these eight elements is likely to be a semi-metal or metalloid?
Answer.
1. A and B belong to group 1 and 2 because they form basic oxides. C belongs to group 13
as it has 3 valence electrons. D belongs to group 14 as it forms almost neutral oxide. E
and F belong to group 15 – and 16 as they form acidic oxides, G belongs to group 17 as it
has 7 valence electrons and H belongs to group 18. They belong to 3rd period of Periodic
Table because sodium belongs to 3rd period and AG is NaCI, ionic compound of sodium
which can be obtained from sea water and A(Na) and G(CI) belong to 3rd period.
2. H belongs to noble gas.
3. A has the largest atomic radius.
4. E and F are likely to be non¬metals.
5. D is likely to be metalloid or semi-metal.
➣ Nutrition- The process in which an organism takes in food, utilizes it to get energy, for
growth,repair and maintenance, etc. and excretes the waste materials from the body
Types of nutrition
1. Autotrophic nutrition (Auto =self: trophos = nourishment) E.g. Plants, Algae, blue green
bacteria.
o Equation-
(ii) Water
(iii) Light
(iv) Temperature
o Events/ Steps of photosynthesis-
(ii) Conversion of light energy to chemical energy & Splitting of water molecule into Hydrogen & oxygen
o Gaseous exchange-
2. Heterotrophic nutrition (Hetero =others: trophos =ourishment) Eg. Animals, plants lacking chlorophyll
like fungi.
(a) Saprophytic nutrition: Organisms feeds on dead decaying plants or animals material. E.g.Fungi,
Bacteri
(b) Parasitic nutrition: Organisms obtain food from the body of another living (host)
o Endoparasite : Parasite lives inside the body of the host e.g. tapeworm, roundworm.
o Exoparasite : Parasite lives on the body of the host. E.g. lice, leech.
Note- The parasite benefits while the host is usually harmed e.g. Cuscutta-plant parasite (amarbel),
plasmodium (malarial parasite).
(c) Holozoic nutrition: Organism (mostly animals) take in whole food and then digest it into smaller
particles with enzyme. Eg.Amoeba, Paramoecium. Animals, humanbeings.
(ii) Digestion: breaking down of complex food into simpler, absorbable form.
♦ Important gland/juices
Mouth includes teeth, salivary glands, and tongue. Teeth break down the food. They are of four
types – molars (6), premolars (4), canines (2), and incisors (4) in each jaw.
In total life span of humans, two sets of teeth grow – milk teeth and permanent teeth.
Saliva is secreted by salivary glands located under the tongue. It contains a digestive enzyme
salivary amylase, which breaks down starch into sugar.
The food from mouth passes down the oesophagus to the stomach, through the movement of
walls of oesophagus (peristalsis)
Stomach mixes the food received from oesophagus with digestive juices.
o Mucus – protects the lining of stomach against the action of the acid.
o It is the site where complete digestion of carbohydrates, proteins, and fats takes place.
o All the digested food is absorbed by the walls of intestine. This process is known as absorption.
o Inner lining of small intestine has tiny finger-like projections called villi.
o Villi increase the surface area for more efficient food absorption.
o The absorbed food is delivered to each and every cell of the body where they are used to
produce complex substances such as proteins, etc. This process is known as assimilation.
o It receives intestinal juice from two glands – liver and pancreas that help in further digestion of
food.
o Liver - It is the largest gland of the body and secretes bile juice. Bile juice is stored in gall
bladder and plays an important role in the digestion of fats.
o Pancreas - Pancreas contains enzymes that help in complete digestion of all food components.
o The digested food from small intestine goes into blood stream and the undigested and
o The function of large intestine is absorption of water and some salts from undigested food.
o From large intestine, the waste material is stored in rectum in the form of semi-solid faeces.
o The undigested, stored waste is excreted out from the body as faeces via anus. This process is
known as egestion.
Amoeba is a single-celled organism which feeds on algae, rotifers, protozoans, and even other
small Amoeba.
Amoeba can constantly change its shape with the help of pseudopodia.
Pseudopodia (also called false feet) are the finger-like projections that help Amoeba in moving
and capturing food.
When an Amoeba senses its prey, it pushes out its pseudopodia around it and engulfs it. The
food thus eaten gets trapped in the food vacuole.
Digestive juices such as amylase and protease are secreted inside the food vacuole in an
Amoeba. These juices act on the food and break it down into smaller components.
Amylase breaks down complex carbohydrates into simple sugars while protease breaks down
proteins into simpler substances.
The digested food is later absorbed by Amoeba for growth, maintenance, and
Respiration
Respiration is the process of taking in oxygen and releasing carbon dioxide. The process involves
the consumption of oxygen and liberation of carbon dioxide and water.
Aerobic respiration
Yields 38 ATP
First step- Breakdown of glucose (6C) into pyruvate (3C). It takes place in the cytoplasm
Second step- Pyruvate is broken down into CO2 and water. It takes place in mitochondria,
energy is produced in the form of ATP.
Anaerobic respiration
Second step- Break down of pyruvic acid into ethanol and water and energy (in yeast) and
Human respiration
Haemoglobin is the respiratory pigment present in blood is mainly responsible for the transport
of carbon dioxide and oxygen.
Transportation is a life process where substances synthesized or absorbed in one part of the
body are carried to other parts of the body.
Transportation in plants
o The transportation system in plants moves the energy stored in leaves to different parts. It
also helps in moving raw materials absorbed from the roots to various organs of the plant.
o Xylem conducts water and minerals obtained from soil (via roots) to the rest of the
plant. Transport of water occurs due to transpiration pull, root pressure and difference in
pressure gradient.
o Phloem transports food materials from the leaves to different parts of the plant body.
Transportation
It is a life process where substances synthesised or absorbed in one part of the organism's
Translocation in plants
The translocation system in plants moves the synthesised food from leaves to remaining
plant parts. It also helps in moving raw materials absorbed from the roots to various
Phloem transports food materials from the leaves to different parts of the plant body.
The phloem consists of companion cells, sieve tubes, phloem parenchyma, and fibres.
Transport of food (translocation) through phloem requires energy, which is obtained from
Transportation in humans
o The system that transports nutrients and collects waste materials for disposal in the body is the
circulatory system.
o The circulatory system consists of the central organ i.e., the heart, blood vessels, and
circulating fluid i.e., blood.
Circulation in humans
o Double circulation occurs in human i.e. the blood goes through the heart twice during each
cardiac cycle.
Heart-
(iii) It has two sides, which are separated by a partition so that the oxygenated and deoxygenated
(i) Left atrium relaxes & the Oxygenated blood enters it from the lungs through the pulmonary
vein.
(ii) Left atrium contracts & the blood enters the left ventricle through the valve.
(iii) Left Ventricle contracts and the blood is pumped into the
largest artery ‗Aorta‘ and is carried to all parts of the body.
(i) Right atrium relaxes & the deoxygenated blood from the body enters it through superior and
(ii) Right atrium contracts & the blood enters the right Ventricle through the valve.
(iii) Right Ventricle contracts and the blood is pumped into the Pulmonary artery and is carried to
lungs.
♦ Double circulation in man- because the blood passes through the heart twice in one complete
♦ Capillaries-
(ii) Walls are one cell thick only for easy exchange of blood.
♦ Platelets- Plug the leaks of arteries and veins by clotting the blood.
♦ Lymph- Extracellular fluid similar to plasma but colourless with lesser protein.
♦ Function of lymph-
(i) Transportation of digested & absorbed fats from the small intestine.
(ii) Drains excess fluid from the intercellular spaces back in the blood.
(i)Oxygenated blood & Deoxygenated blood are completely separate for efficient Oxygen supply.
(ii)This is to fulfil higher energy needs and to maintain body temperature (warm blooded
animals).
♦ Amphibians & reptiles- have 3 chambered heat where little mixing of Oxygenated blood &
Deoxygenated blood takes place. Therefore their body temperature varies with the temperature
of
➣ Excretion- The biological process of removal of harmful metabolic wastes in living organisms.
♦ Kidneys-
c) Convoluted tubule- is long and reabsorbs vital nutrients like glucose, amino acids, salts, urea
and water.
➣ Excretion in plants-
♦ Gaseous wastes- CO2 in respiration & O2 in photosynthesis are removed by the process of
diffusion.
♦ Other wastes-
(i) Stored in cellular vacuoles or in leaves, which fall off or as gums, resins, etc. in old xylem.
➣ Important diagrams-
5. Structure of heart.
7. Structure of nephron
➣ Important activities-
(a) nutrition.
(b) respiration.
(c) excretion.
(d) transportation.
Solution 1: (c) In human beings, the kidneys are a part of the system for excretion.
(b) chlorophyll.
(c) sunlight.
Solution 3: (d) The autotrophic mode of nutrition requires carbon dioxide, water, chlorophyll
and sunlight.
4. The breakdown of pyruvate to give carbon dioxide, water and energy takes place in
(a) cytoplasm.
(b) mitochondria.
(c) chloroplast.
(d) nucleus.
Solution 4:(b) The breakdown of pyruvate to give carbon dioxide, water and energy takes
place in mitochondria.
Solution 5: d
(i) Carbon Dioxide: Plants get CO2 from atmosphere through stomata.
(ii)Water: Plants absorb water from soil through roots and transport to leaves.
(iii) Sunlight: Sunlight, which is absorbed by the chlorophyll and other green parts of the plant.
Answer. The deficiency of hemoglobin in our body is called anemia. In anemia, the blood is
unable
to carry the sufficient amount of oxygen required by the body. So, respiration would be less and
less
energy will be available to the body. The hemoglobin deficient person will feel weak, pale,
lethargic
and will be
Q3 Name the green dot like structures in some cells observed by a student when a leaf peel
was viewed under a microscope. What is this green colour due to?
Answer. The green dot-like structures in some cells observed by a student when a leaf peel is
viewed under a microscope are chloroplasts. The green colour is due to the presence of green
pigment, chlorophyll.
Q4State any one difference between autotrophic and heterotrophic modes of nutrition.
Answer. In autotrophic nutrition, organisms obtain their food from inorganic substances. In
Q5.A Give one reason why multicellular organisms require special organs for exchange of
Answer. In unicellular organisms the entire body of the organism is in contact with the
environment
hence exchange of materials can take place but, in multicellular organisms the entire body of the
organism is not in contact with the environment and hence simple diffusion is not helpful.
In the experiment “Light is essential for photosynthesis”, why does the uncovered part
Answer. Starch is produced in the uncovered part of the leaf because it is exposed to sunlight
Q8. Name the component of blood that helps in the formation of blood clot in the event of a
cut.
Answer. Platelets help in clotting of blood in the event of a cut.
Q9. Mention how organisms like bread moulds and mushrooms obtain their food.
Answer. Organisms like bread moulds and mushrooms breakdown the food materials outside the
Answer. Xylem in plant transports water and dissolved mineral nutrients from the roots to all
parts
of the vascular plant. So, if xylem is removed from the plant, the water and mineral supply to the
Answer. Digestion of fat takes place in the small intestine of our body.
Q1. What are enzymes? Name any one enzyme of our digestive system and write itsfunction.
Answer. Enzymes are biological catalysts. Catalysts are proteins that increase the rate of
chemical reactions without being used up. For example: Amylase catalyses the breakdown of
starch into sugars in the mouth and small intestine
Q2. (i) Write the balanced chemical equation for the process of photosynthesis,
(ii) When do the desert plants take up carbon dioxide and perform photosynthesis ?
Answer.
(i) Photosynthesis can be represented using a chemical equation. The overall balanced equation
is
(ii) Desert plants open up their stomata during night and take in CO2. Stomata remains close
during
the day time to prevent the loss of water by i transpiration. They store the CO2 in their cells until
the
sun comes out and they can carry on with photosynthesis during the day time.
Q3. Why do herbivores have longer, small intestine than carnivores ?
Answer. Digestion of cellulose takes a longer time. Hence, herbivores eating grass need a longer
small intestine to allow complete digestion of cellulose. Carnivorous animals cannot digest
cellulose
due to the absence of enzyme CELLULASE, hence they have a shorter intestine.
Q4. Write correct sequence of four steps of method for the preparation of temporary mount
Answer.
2. Remove a part of the peel from the lower surface of the leaf. You can do this by folding the
leaf
over and gently pulling the peel apart using forceps. Keeps the peel in a watch glass containing
water.
4. After 2-3 minutes take out the peel and place it on a clean glass slide.
5. Put a drop of glycerin over the peel and place a clean covers lip gently over it with the help of a
needle.
6. Remove the excess stain and glycerin with the help of blotting paper.
Q5. Why do the walls of the trachea not collapse’when there is less air in it?
Answer. Rings of cartilages are present in trachea. These rings support the trachea and do not
allow
Q6. What are the final products after digestion of carbohydrates and proteins?
Answer. The final product produced after digestion of carbohydrates is glucose and of proteins is
amino acids.
Answer. Saliva is a watery fluid secreted by the salivary glands in the mouth. The digestive
functions of saliva include moistening food, and helping to create a food bolus, so it can be
swallowed easily. Saliva contains the enzyme amylase that breaks some starches down into
maltose
and dextrin.
Answer. Amoeba is an important protozoa found in fresh water. It feeds on microscopic plants
and animals present in water. The mode of nutrition in amoeba is Holozoic. And the process of
obtaining food by amoeba is called phagocytosis. The different processes involved in the
nutrition of amoeba
1. Ingestion: Ingestion is the process of taking food in the body. Amoeba is a unicellular animal,
so it doesn’t have a mouth for ingestion of food. Amoeba ingests the food by encircling it by
forming pseudopodia. When the food is completely encircled , the food is engulfed in the form
2. Digestion: Digestion is the process of breaking the large and insoluble molecules in small and
water soluble molecules. In amoeba, several digestive enzymes react on the food present in
the food vacuoles and break it down into simple and soluble molecules.
3. Absorption: The food digested by digestive enzymes is then absorbed in the cytoplasm by the
process of diffusion. While the undigested food remains in the food vacuole. If a large amount
of food is absorbed by amoeba, the excess food is stored in the cytoplasm ih the form of
4. Assimilation: During this step the food absorbed by the cytoplasm is used to obtain energy,
growth and repair. This process of utilizing absorbed food for obtaining energy, repair and
5. Egestion: When a sufficient amount of undigested food gets collected in the food vacuole, it is
thrown out of the body by rupturing cell membrane. The process of removal of undigested food
Answer. Arteries
1. Arteries carry oxygenated blood, away from the heart except pulmonary artery.
2. These are thick-walled, highly muscular except arteries of cranium and vertebral column.
1. Veins carry deoxygenated blood, towards the heart except pulmonary veins.
Q10. How are the alveoli designed to maximise the exchange of gases?
Answer. Alveoli are small pouches or sacs like structure. They are surrounded by blood
capillaries.
Thus a large amount of air is brought in contact with the air in the lungs. More than millions of
alveoli are present in the lungs. The presence of millions of alveoli in the lungs provides a very
large surface area for the exchange of gases. The availability of large surface area maximises the
exchange of gases.
Q11. Name two excretory products other than 02 and CO2 in plants.
Answer. The two excretory products other than 02 and CO2 in plants are resins and gums.
Q12. In single celled organisms diffusion is sufficient to meet all their requirements of food,
Answer. Unicellular organisms can absorb sufficient oxygen because of its complete contact with
the
atmosphere, but in multicellular organisms the rate of absorption and diffusion becomes very
less
because all cells are not in direct contact with the atmosphere. Multicellular organisms require
greater amount of oxygen to sustain life processes which cannot be fulfilled by the process of
diffusion.
Q13. Name the acid presents in the following:
Answer.
(i) Digestive enzymes – Foods need to be broken into their small or simpler
molecules so that they can be absorbed into the bloodstream. However, the physical breakdown
of
food is not enough. Enzymes are hence needed for the chemical breakdown of food and
speeding up
the digestive process. The products of digestion can hence be small enough to be absorbed.
(ii) Hydrochloric acid – Hydro chloric acid helps to kill the germs which might have entered in to
the
system through food. It creates acidic medium for the pepsin to act on food to breakdown
proteins.
(iii) Villi – Villi are finger like projections in the small intestine. They help to increase the surface
area
for absorption of the digested food. Villi are richly supplied with blood vessel which help to
absorb
Q15. In mammals and birds why is it necessary to separate oxygenated and de-oxygenated ?
Answer. Mammals and birds are warm blooded animals. This means they can control their
bodytemperature and do not have to depend on environment for their body temperature
regulation.Because of this birds and mammals require optimum oxidization of glucose which
would be possible with good supply of oxygen. So it is required to have separate oxygenated and
de-oxygenated blood to supply the required amount of oxygen.
Q16. List three characteristics of lungs which make it an efficient respiratory surface.
Answer. These features which particularly make our lungs efficient for gas exchange.
1.Thin: the air sac walls are very thin so that gases can quickly diffuse through them. Oxygen is
absorbed in to the blood and carbon dioxide is given out in to the lungs to be exhaled out.
2.Moist: the air sacs are moist with mucus so that gases can dissolve before diffusing.
3.Large surface area: the surface area for gases to diffuse through in human lungs is roughly the
same as a tennis court. The alveoli help to increase the surface area for absorption of oxygen.
4.Good blood supply: the air sacs or the alveoli have a large capillary network so that large
volumes of gases can be exchanged. More the flow of blood more exchange.
Answer.
(ii) It has a pH of 2, which is perfect for entyaus such as pepsin to break down proteins as
effectively
as possible.
(iii) Helps emulsify food (digestion of protein and stimulates the pancreas to produce digestive
(b) Breakdown of large gloubule fats into smaller fats droplets is known as emulsification.
(c) Trypsin is the enzyme secreted by the pancreas which aids in digestion of proteins.
Describe in brief the function of kidneys, ureters, urinary bladder and urethra.
Answer. The Kidneys filter the blood and concentrate the filtrate to make urine. They also help
Urinary bladder is like a holding tank for the urine until it’s ready to be excreted. Urethra is the
tube
that connects the urinary bladder to the outside of the body for excretion.
Long Answer Type Question [5 Marks]
Q18. Explain the process of breakdown of glucose in a cell (ii) in the absence of oxygen.
The first step in the breakdown of glucose both in presence of 02 and in absence of Os is same. In
Second step which involves further breakdown of private into simple compounds can take place
in
(i) In presence of Oz: In the presence of 02, private is converted into C02 and water. Energy
released during aerobic respiration is much greater than that released during an anaerobic
respiration.
(ii)In absence of Oz: In the absence of 02 in yeast, pyruvate is converted into ethanol and C02
and
the process is called fermentation. In absence of 02, in our muscle cells, pyruvate is converted
into
lactic acid. The build up of lactic acid in muscle cells causes cramps.
Q19. (a)Explain how does the exchange of gases occur in plants across the surface of stems,roots
and leaves.
Answer.
(a) In plants there are tiny pores called stomata on leaves and lenticels in stem which facilitate
the exchange of gases. Carbon dioxide is taken in and oxygen given out {during photosynthesis}
and vice versa during respiration.
(b) Water and minerals are transported within the plant by the Xylem vessels (mainly in an
upward direction); these are part of the vascular system which also includes Phloem vessels.
Phloem transports the products of photosynthesis within the plant, to all parts like the stem,
roots, fruits etc. in all directions.
Q20. Draw a diagram of human excretory system and label renal artery and urethra.
1. renal artery
2. kidney
3. ureter
4. urinary bladder
Renal artery: The renal artery carries blood to the kidneys from the abdominal aorta. This
blood comes directly from the heart and is sent to the-kidneys to be filtered before it passes
through the rest of the body. Up to one-third of the total cardiac output per heartbeat is sent to
the renal arteries to be filtered by the kidneys. Each kidney has one renal artery that supplies it
with blood. The filtered blood then can exit the renal vein.
2. Kidney: The kidneys perform the essential function of removing waste products from the
bloodand regulating the water fluid levels. The kidneys regulate the body’s fluid volume, mineral
composition and acidity by excreting and reabsorbing water and inorganic electrolytes.
3. Ureter: The ureter is a tube that carries urine from the kidney to the urinary bladder.’ There
are two ureters, one attached to each kidney.
4. Urinary bladder: The urinary bladder is an expandable muscular sac that stores urine before it
is excreted out of the body through the urethra.
Q21. (a) Draw a diagram of excretory system in human beings and label the following parts.
Blood from the heart comes into the kidneys afferent and efferent arteriols from the renal
arteries where it enters about 2-3 million nephrons per kidney. Then, it goes through the
glomerulus
a tugt or bunch of blood capillaries and get rid of some of the unwanted substances like urea,
uric
acid, creatinine in the blood and then continues through the renal tubules. The loop of Henley,
reabsorb certain substances such as water (actually if body is dehydrated, body will send anti-
diuretic hormone (ADH) to kidneys to prevent extra water from going into urine and thus saving
water for body and get rid of anything else that isn’t wanted, then the urine goes through ureters
to
Q22. (a) Draw a diagram to show open stomatal pore and label on it:
(ii) chloroplast
(c) How do guard cells regulate the opening and closing of stomatal pore?
Answer. (a)
(i) Exchange of gases between the plant and the atmosphere takes place through stomata.
(c) Opening and Closing of Stomatal Pore: The opening and closing of the pore is a function of the
guard cells. The guard cells swell when water flows into them causing the stomatal pore to
open.Similarly, the pore closes if the guard cells shrink. As large amount of water is lost through
these stomata, the plant closes these pores when it does not require carbon dioxide for
photosynthesis.
Q23.(a) What is meant by breathing? What happens to the rate of breathing during vigorous
exercise and why?
(b) Define translocation with respect to transport in plants. Why is it essential for plants? Where
in plants are the following synthesised?
Answer. (a) The process of taking in of oxygen from air in to the lungs and expulsion of
carbondioxide out of the lungs is called breathing. The rate of breathing during vigorous exercise
increases by about 20 to 25 times per minute. It is because, during vigorous exercise the demand
for oxygen
increases. Breathing occurs involuntarily but its rate is controlled by the respiratory center of the
brain.
(b) Translocation is the transport of food from the leaves to other parts of the plant and occurs in
the part of the vascular tissue known as phloem.
It is essential for plants because every part of the plant needs food for obtaining energy for
building its parts and maintaining its life.
(ii) Hormones are synthesised at the tips of roots and stems of a plant.
Q24. (a) Draw a sectional view of the human heart and label on it – Aorta, Right ventricle and
Pulmonary veins.
Answer. (a)
(i) Blood
Oxygen is transported by the blood to the tissues of the body for the breakdown of
digestedfood.Carbon dioxide is transported to the lungs by the blood plasma.
The digested and absorbed nutrients are transported by blood to the tissues. Nitrogenous wastes
are transported to the kidneys.
It regulates the body temperature and maintains the pH of the body tissues.
It transports various hormones from one region to another and bring about the coordination. It
maintains water balance to constant level.
The lymphocytes produce antibodies against the invading antigens and protect from diseases. It
helps in rapid healing of wounds by forming a clot at the site of injury.
(ii) Lymph
It provides a pathway for the absorption of fats and fat-soluble vitamins into the bloodstream.
ist the three events that occur during the process of photosynthesis.
(a) The three events that occur during the process of photosynthesis are:
(ii) Conversion of light energy into chemical energy and the splitting of water molecule into
hydrogen and oxygen.
Role of Stomata
Stomata are tiny pores present on the surface of leaves. They are also present on the surface of
young stems. Stomata are mainly engaged in the exchange of gases (entry of CO2 and release of
O2 ) associated with photosynthesis. Plant closes the stomata when it does not need CO2 for
photosynthesis.
Procedure:
(i) Place a healthy green potted plant in a dark room for 1-2 days. This is done to ensure
that the plant consumes all its reserve food and the leaves do not contain any starch.
(ii) Then, cover a portion of a leaf of this plant on both sides with two uniform pieces of black
paper,
(iii) Now, expose this plant to bright light. After a few hours, remove the leaf and decolorize it
with
alcohol and test the presence of food (starch) with iodine solution.
Observation: It can be observed that the portion of the leaf covered with black paper does not
prepare food.
Conclusion: This is because the food prepared by plants through the process of photosynthesis is
stored as starch. Starch reacts with the iodine solution to give blue-black colour. Only those
portions of the leaf that were exposed to sunlight could photosynthesise. Hence, gives blue-
black colourwhen tested with iodine. The portion of the leaf covered with black paper did not
receive sunlight.
Hence, starch was not produced. Thus, it can be concluded that the sunlight is essential for
photosynthesis.
The kidney's primary function is the elimination of waste from the bloodstream by production of
urine. They perform several homeostatic functions such as: -
4. Excrete toxic metabolic by-products such as urea, ammonia, and uric acid. Urea is the end
product of a set of biochemical reactions, and the urea produced in the liver is transported to the
kidneys and finally excreted as a waste product in urine. The way the kidneys do this is with
nephrons. There are over 1 million nephrons in each kidney; these nephrons act as filters inside
the kidneys. The kidneys filter needed materials and waste, the needed materials go back into
the bloodstream, and unneeded materials becomes urine and is gotten rid of.
1. The basic functional unit of a kidney, according to the text above would be:
A. Urea
B. Ammonia
C. Nephron
D. Uric acid
The DNA (Deoxyribonucleic acid) molecules in the chromosomes in the nucleus are
responsible for the transfer of characters from the parents to their offspring. During reproduction
the reproductive cells produce two copies of the DNA which separate into two cells. The DNA
copies will be similar but not identical to each other. So, the new individuals have slight
variations from their parents.
The importance of variation : DNA copying during reproduction is important for maintaining
the body designs of different organisms to survive in the existing environment. But the
environment is constantly changing due to changes in temperature, climate, water levels etc. If
organisms cannot adjust themselves to the changes in the environment then their species will
become extinct. If there are variations in some individuals of a species, they may be able to
survive the changes in the environment. So, variations in species are necessary for the survival
of different species and for the evolution of new species.
Types of reproduction : There are two main types of reproduction in living organisms. They
are asexual reproduction and sexual reproduction.
Asexual reproduction is reproduction in which new individuals are produced from a single
parent.
Sexual reproduction is reproduction in which two individuals are involved to produce a new
individual.
Fission is of two types. They are binary fission and multiple fission.
Binary fission : In this method an organism divides and forms two individuals. First the
nucleus divides and forms two nuclei. Then the cytoplasm divides and forms two daughter cells.
E.g. - Amoeba, Paramecium etc.
Multiple fission : In this method one organism divides into many daughter cells. E.g. –
Plasmodium (Malarial parasite).
BINARY
FISSION IN
AMOEBA
MULTIPLE
FISSION IN
PLASMODIUM
Budding : In this method a bud like projection is formed on the body of the organism. The
bud then develops into a new individual. Then it separates from the parent and forms an
independent individual. E.g.- Hydra, Yeast etc
Regeneration : In this method a part of the body if the organism if cut or broken can develop
into a new individual. E.g.- Hydra, Planaria, Star fish etc.
REGENERATION IN PLANARIA REGENERATION IN HYDRA
Fragmentation : In this method the body of a simple multicellular organism breaks up into
smaller pieces on maturation and each fragment develops into new individuals. E.g. - Spirogyra.
Spore formation : In this method sporangia produce tiny cells called spores. When the
spores come in contact with a moist surface, it develops into new individuals. E.g.- Rhizopus,
Mucor, Penicillium etc.
Vegetative propagation : In this method new plants are produced from the vegetative parts
of the plant like root, stem or leaf. E.g. - from roots in Dahlia, sweet potato; from stem in Potato,
Ginger; from leaf in Bryophyllum, Begonia.
Plants produced by vegetative propagation produce flowers and fruits earlier than those
produced from seeds. It also helps in the propagation of plants which do not produce seeds like
rose, jasmine banana etc.
Vegetative propagation can also be done artificially by cutting, layering, grafting etc.
LEAF BUDS IN
BRYOPHYLLUM
Reproductive parts of a flower : The stamen and pistil are the reproductive parts of the flower.
Stamen is the male reproductive part. It produces pollen grains in the anther which contains the
male germ cell (male gamete). Pistil is the female reproductive part. It produces ovules in the
ovary which contain the female germ cell (female gamete).
Pollination : The transfer of pollen grains from the anther to the stigma of a flower is called
pollination. It takes place by wind, water or insects.
If the pollen grains are transferred from the anther to the stigma of the same flower called self-
pollination and if it is transferred from the anther of one flower to the stigma of another flower
called cross pollination.
Fertilization : After the pollen grain is transferred to the stigma it produces a pollen tube which
passesthrough the style and enters the ovary and ovule. In the ovule the male germ cell (male
gamete) fuses with the female germ cell (female gamete) to form a zygote. This process is
called fertilization.
After fertilization the zygote divides several times and forms the embryo which then develops
into the seed and the ovary develops into the fruit.
STRUCTURE OF SPERM
Female reproductive system : The female reproductive system consists of a pair of ovaries
which produces the female reproductive cells called ova or eggs and the hormone estrogen.
Above the ovaries are tubes called oviducts or fallopian tubes. The two oviducts unite into a bag
like structure called uterus. The uterus has opening called vagina.
FEMALE
OVA
Fertilisation in human
beings : During sexual
intercourse the sperms
from the male enters into the vagina of the female.
The sperms reach the oviduct. One sperm fuses
with an egg and forms a zygote. The zygote then gets implanted in the
uterus. The zygote then starts dividing to form an embryo. The
embryo gets nutrition from the mother’s blood through the placenta.
The development of the child takes nine months and then the child is born.
Menstruation : The ovary produces one egg every month and the uterus prepares to receive
the fertilized egg. Its wall becomes thick and spongy with blood vessels for nourishing the
embryo. If fertilization does not take place then the uterus wall breaks and comes out of the
vagina as blood and mucous. This cycle takes place once every month and is called
menstruation.
Sexually Transmitted Diseases : These diseases are transmitted through sexual contact. They
may be bacterial infections like gonorrhea and syphilis etc. or viral infections like warts and
AIDS.
Chemical methods consists of taking drugs like oral pills, vaginal pills etc.
Surgical methods consists of removing or tying a small part of the vas deferens in males
(Vasectomy) or fallopian tube in female (Tubectomy).
MULTIPLE CHOICE QUESTIONS:
Ans: d
(a) Flat worm (b) Round worm (c) Rhizopus (d) Amoeba
Ans: a
3. Rose is multiplied by
Ans: b
Ans: b
Ans: a
(a) pollen grains (b) embryo sac (c) sigma (d) ovary
Ans: a
Ans: b
(a)one male gamete (b) 3 male gametes (c) four male gametes (d)2 male gametes
Ans: d
Ans: a
(a) embryo sac (b) Pollen tube (c) stigma (d) style
Ans: a
Ans: b
Ans: b
(a) one day (b) 14 days (c) 28 days (d) 7-8 days
Ans: c
15. Arrest of reproductive capacity in woman in the age of 45-55 years is known as
Ans: a
Ans: b
Ans; b
Ans: a
Ans: d
1. Define reproduction.
Ans : It is the process of producing new organism of the same species by existing organisms of
a species.
2. Define fertilization. Where the fertilization does takes place in human female?
Ans: It is defined as the fusion of a male gamete( sperm) with a female gamete(ova) to form a
zygote during sexual reproduction.
Ans: Two main type of reproductions is asexual reproduction and sexual reproduction.
5. What method will you use for growing jasmine and rose plant?
Ans: Artificial mode of vegetative reproduction-layering and grafting are used for growing
jasmine and rose plant.
6. Define menstruation.
Ans-The breakdown and removal of inner thick and soft lining of uterus along with blood vessels
in the form of vaginal bleeding is called menstrual flow or menstruation.
Ans: Male reproductive part is stamen, which consists of filament and anther. Female
reproductive part is carpel, which consists of ovary, style and stigma.
8. Define gestation period. What is the gestation period in human?
Ans: The time period from the development of foetus inside the uterus till birth is called gestation
period. In humans, the gestation period lasts for 9 months or 40 week or 280 days.
Ans: The location of the scrotum regulates the temperature of the testes because sperm
formation requires a lower temperature than the body temperature.
Ans : Amoeba reproduces by binary fission in which one cell divides into two daughter cells.
Ans : The development of new plants from parts such as roots, stem and leaves, of the plant is
called vegetative propagation.
13. Name the male and female gonads and what are the products they produce.
Female gonads – ovaries, Products-hormones estrogen and progesterone, which stimulates the
secretion of eggs.
14. Which part of human female reproduction system is called - birth canal and the -womb?
Ans –Vagina is called the birth canal and the uterus is called the womb
Ans- (a) Intra Uterine Contraceptive Device (b) Acquired immune deficiency syndrome.
Ans: The fusion of one male gamete with an egg to form zygote is called syngamy.
Ans: The release of ovum or the egg from the ovary is called ovulation.
Ans- DNA copying helps to pass on the parental body features to offspring’s. It produces
variations, which are useful for the survival of species over time.
2. Why is variation beneficial to the species but not necessarily for the individual?
Ans-Organisms are normally adopted to live in a particular kind of niche. In case of alternation in
the ecological conditions of that niche, the organisms would not be able to survive. Only the
variants’ the organisms resistant to changes would survive and grow further. Thus variation is
beneficial to the species not necessarily for the individual.
Ans- Binary fissions results in the formation of two equally sized daughter cells, whereas
multiple fission results in the formation of many daughter cells.
B. Spores have an outer thick wall that protect them in adverse conditions until they come in
contact with another moist surface and begin to grow.
5. Can you think of reasons why more complex organisms cannot give rise to new
Ans- More complex organisms cannot give rise to new individuals through regeneration
because:
iv. Regeneration is carried out by specialized cells which are not present in complex
organisms.
Ans-Vegetative reproduction is practiced in some types of plants due the following reasons:
a. The plants which do not produce viable seeds are propagated by vegetative propagation
such as banana, orange and rose.
b. Plants raised by vegetative propagation bear flower and fruit earlier than those produce from
seeds.
9. . What is the role of the seminal vesicles and the prostate gland?
Ans: The secretion of seminal vesicles activates and nourishes the sperms whereas the
secretion of prostate gland contributes the mortality and fertility of sperms.
Ans: Pollination is the process of transfer of pollen grains from anther to stigma whereas
fertilization is the process of fusion of male gamete with a female gamete to form zygote.
11. How does the embryo get nourishment inside the mother’s body?
Ans-The embryo gets nourishment inside the mother’s body through placenta. This tissue
contains villi on the embryo’s side and is surrounded by blood from the mother’s side.
Substances like glucose and oxygen pass from the mother’s blood to the embryo through villi.
12. If a women is using copper –Twill it help in protecting her from sexually transmitted
diseases?
Ans: No, because copper-T helps in preventing pregnancy ,but not provide protection against
sexually transmitted diseases.
13. Show by a series of labeled diagram, the manner in which reproduction in Hydra.
Ans- Hydra reproduces by budding using the regenerative cells. A bud develops as a
outgrowth in hydra due to repeated cell division of specific site, when full mature, the bud
detaches from the parent’s body and develop into new individuals.
Fig
Ans- It is ability of a fully differentiate organisms to give rise to new individual from its body
parts. For example-Hydra and Planaria.
If Hydra is cut into two or more pieces grow into new and complete Hydra .This is known as
regeneration.
15. Define the terms unisexual and bisexual flowers by giving one example of each.
Ans- Unisexual flower means flower which contain only one sex organs either stamen or carpel
but not both. Eg-papaya, watermelon. Bisexual flower means flower which contain both stamen
and carpels. Eg- hibiscus.
16. Leaves of the bryophyllum fallen on the ground produce new plants whereas the leaves of
rose do not. Why?
Ans- Leaf of bryophyllum show vegetative propagation in plants where a part of the body
becomes detached and develop into a new supporting plant. Here leaves of bryophyllum having
plantlets along the margin of the leaf, while this structure is absent in rose plant.
Ans. The removal of the inner, thick and soft lining of the uterus along with its blood vessels as
well as blood in the form of vaginal bleeding is called menstruation. In humans after a girl attains
puberty ovaries start producing mature ovum every month and also uterus lining gets thickened
to receive zygote. When the uterus does not receive any zygote then menstruation occurs to
excrete lining of uterus and degenerating ovum.
(a) Hormonal methods: Various kinds of pills containing hormones which prevent the release of
egg from the ovary, without interfering with other phases of menstrual cycle, are taken orally.
(b) Barrier method: These are the physical and chemical barriers which prevent the sperms
meeting the egg. Physical devices such as condoms, diaphragms and cervical caps are used.
(c) Intrauterine Devices: Commonly called as I.U.Ds, they are the devices made of plastics and
come in different shapes. The most commonly among these is copper- ‘T’. These devices are
placed inside the uterine cavity and permanently kept there. It prevents the implantation in the
uterus.
(d) Surgical methods. The surgical methods are safe and permanent.
(i) Vasectomy. In this operation, a small piece of vas deferens is cut and removed and the two
ends of the cut vas deferens are tied.
(ii) Tubectomy. In this operation, fallopian tubes are cut, tied with nylon thread to close the
passage, which prevents the passage of eggs.
Q.19. How are the modes of reproduction different in unicellular and multicellular organisms?
Ans. Unicellular organisms contain only one cell so they reproduce by asexual reproduction.
Example: budding, binary and multiple-fission are some of the asexual methods. Multicellular
organisms which have complex body designs (have organ systems) ex. Humans, animals,
plants reproduce sexually.
Ans. Reproduction is the process through which an organism produces new organism of its own
kind. It is necessary because in a population organisms die due to old age or disease thus it
keeps the number of organisms in a population constant and provides stability to a population.
Ans- a) Sexual reproduction plays a prominent role in evolution of new species whereas asexual
reproduction does not.
b) Sexual reproduction provides opportunity for new combination of gens and thus causes
genetic variation. This is not applicable by asexual reproduction.
Ans- The testis produces sperms and secrets the hormone testosterone, which regulates the
formation of sperms and brings about changes in appearance seen in boys at the time of
puberty.
Ans- Every month as one of the ovaries releases ovum,the uterine wall thickens and
prepares itself for receiving the developing zygote.If the fertilization of the ovum does not take
place, the lining of uterine wall slowly breaks and menstruation occurs.
Ans
b. Better quality of plant cannot b. Better quality of the plant can be develop.
maintained
5. Draw a diagram of a flower to show its male and female reproductive parts. Label on it : a.-
the ovary b- the anther c- the filament d- the stigma .
Ans- fig—
Ans : Pollination is followed by fertilization in plants after pollen lands on the suitable stigma, it
has to reach the female germ cells in the ovary. The pollen tube grows out of the pollen grain
through the style to reach the ovary . After fertilization zygote divide several times to form an
embryo within the ovule .The ovules than develop a tough coat and gets converted into seed.
The seed contain a future embryo which converted into a seedlings.
Ans : It is transfer of pollen grains from the anther of the stamen to stigma of a carpel .The
pollen grains are transferred by many agents like insects, birds humans wind etc.
8. What is ‘vegetative propagation’? Write two examples where it is used. State two reasons of
practicing vegetative propagation for giving same types of plants.
Ans-Vegetative reproduction means production of new plants from the parts of the old plant like
stem roots and leaves without the help of reproductive organs.
a) Regeneration in Planaria.
b) Budding in Hydra.
Ans-Fig
Regeneration is ability of a fully differentiated organism to give rise to new individual from its lost
body parts. For ex-in Planaria ,it can be cut into number of pieces and each pieces grows into
complete organism. In Budding a small part of the body of the parent grows out as a ‘bud’ which
than detaches and become a new organism. For ex- In Hydra bud develop as an outgrowth due
to repeated cell division, when fully mature it detach from parent body and develop into new
individual.
1.Only one parent is involved in asexual 1.Two organisms, one male and one
reproduction. female are involved.
Ans—The breakdown and removal of the inner thick and soft lining of the uterus along with its
blood vessels in the form of vaginal bleeding is called menstruation. The series of cyclic
changes involves the formation of follicles, preparation of uterine wall for implantation ,ovulation
,secretion of nutritive fluid by mature endometrium. In absence of fertilization , the uterine wall
collapse and leads to discharge of blood and mucus with unfertilized egg.
Ans : a) Scrotum are located outside the body of human male because sperm formation
requires lower temperature than the normal body temperature .
b) Some plants are propagated only by vegetaive propagation because they have lost the
capacity to produce seeds .ex-Banana, orange, Jasmine etc.
Ans-Niche is a place or position suitable for an organism .The DNA copying during
reproduction helps in the maintenance of the body design features that allow the organism to
use the particular niche. This is how reproduction helps in providing stability to population of
species.
16. .Describe a neat and well labeled diagram of male reproductive system in human.
17. Describe the changes taking place in female reproductive organs every month Or What will
happen if ovum is not fertilized? Describe the events in a sequence wise manner. Or Why does
menstruation occur?
Ans-Cyclic changes taking place in the reproductive organs of non pregnant women are termed
as menstrual cycle. They take place if the ovum is not fertilized. Important events in sexual cycle
of females:
Menstruation-Degeneration and removal of inner thickened lining of uterus along with blood
after every 28 days, through the vaginal canal Both these events stop if pregnancy occurs and
are resumed after the child birth: If fertilization does not occur, both the processes keep
occurring periodically every month.
a) Amoeba
b) Planaria
c) Yeast
d) Frog
Ans- Sexual
e) Rose
Ans-grafting, cutting
f) Bacteria
Ans. When new plants are grown by using vegetative parts like root, stem and leaves it is known
as vegetative propagation.
Ans. The age at which the human males and females becomes sexually mature is called
puberty.
Ans. The transfer of pollen grains from anther to the stigma of the same or another flower of the
same kind is called pollination.
Ans. The tissue connecting developing embryo {foetus} and mother is called placenta.
Ans. The process of reproduction in which only one parent is involved and no sex cells are
involved is called asexual reproduction.
Ans. 1.AIDS
2. Gonorrhea
3. Syphilis
Q1.Name those parts of the flower which serve the same function as the following do in the
animals:
1. Testes
2. Ovary
3. Eggs
4. Sperms
Ans.1.Stamen
2. Carpel
3. Ovule
4. Pollen grain
Q2. What methods will you use for growing jasmine and rose plant?
Ans. Layering method of artificial vegetative propagation can be used for growing jasmine plant.
Stem cutting method
Ans. The breakdown and removal of the inner thick and soft lining of the uterus along with its
blood vessels in the form of vaginal bleeding is called menstruation.
Q5. How the surgery methods are misused by people to prevent pregnancy?
Ans. Surgery methods are misused to prevent pregnancy. This method can be used for removal
of unwanted pregnancies by people who do not want a particular child which happens in case of
illegal sex selective abortion of female foetus.
Q6. What is the significance of human testes being located in the scrotum?
Ans. Scrotum protects the testes by regulating the temperature of the testes. Sperms need a
temperature less than the body temperature for their production and development.
Q7. Questions: Name those parts of a flower which serve the same function as the following do
in the animal
Eggs as eggs
Q.8 Pre - natal sex determination has been prohibited by law. State two reasons.
Ans: Prenatal sex determination has been prohibited by law because of indiscriminate female
foeticide. As a result of this, child sex ratio is declining at an alarming rate in some sections of
our society. For a healthy society, the female male sex ratio must be maintained.
Q.9. What is placenta ? State its any two roles during pregnancy.
Ans: The placenta is an organ that connects the developing fetus to the uterine wall to allow
nutrient uptake, waste elimination, and gas exchange via the mother’s blood supply. "True"
placentas are a defining characteristic of eutherian or "placental" mammals, but are also found
in some snakes and lizards with varying levels of development up to mammalian levels the
following are the roles :-
(a) For nine months the placenta feeds and nourishes the fetus while also disposing of toxic
waste.
(b) Without it the baby could not survive. After your baby is born, the placenta no longer serves
a function.
Q10. Small piece of root tissue was taken from the rose plant and placed in a nutrient medium.
Each root tissue produced a new rose plant. Name the reproductive process involved. What
type of genes will be possessed by new rose plant ?
(ii) Genes possessed by the new plant is same as that of the parent plant.
Q1. (a). What is fertilization? Distinguish between external fertilization and internal fertilization.
Ans.(a) Fertilization is defined as the fusion of male and female gametes to form a zygote during
a sexual reproduction.
1.The fusion of male and female gametes occurs. 1. The fusion of gametes
outside the body occurs inside the body.
2. Both individual discharge their gametes outside the 2. The gametes fuse inside the female
body and development occurs outside the the body and
Development occurs
(b) The site of fertilization in human beings is in the fallopian tube of female reproductive
system.
Ans. 1(i). Vegetative propagation is a cheaper, easier and more rapid method of propagation in
plants than growing plants from seeds.
(ii). The characteristics of the parent plant are preserved by vegetative propagation
In case of males the vas deference is blocked and sperm transfer is prevented. In case of
females the fallopian tube is blocked the egg will not be able to reach the uterus. These are
permanent methods of birth control.
Q5. What could be the reasons for the adopting of contraceptive methods?
2. To prevent the transmission of fatal diseases mechanical barrier methods are used.
Q.7. Name the filamentous structure seen in pond. Explain how do they reproduce.
Ans: Spirogyra have filamentous structure. They reproduce by the process of fragmentation in
which they break up into smaller pieces upon maturation. These pieces grow into new
individuals.
Q.8. A student noticed that an organism by mistake was cut in two parts. After sometime both
the parts developed into new individuals.
Ans:
Q9. Ravi took three bread slices and kept the three pieces of the slices in the following
conditions.
What would he observe in each of the above conditions ? Give reasons for your .answer ?
Ans:
(ii) A white cottony mass surrounded with a black mass is seen spreading on the surface of slice
2 due to formation of sporangia and spores as moisture and darkness provide favourable
condition.
(iii) In slice 3, no spore will be formed as it is kept at a lower temperature in the refrigerator,
which is not a favourable condition.
Q10. (i) State the function of (a) stigma (b) pollen tube. (ii) What happens to the ovule after
fertilization ?
Ans: .
(i) (a) Stigma receives pollens.
(b) Pollen tube helps to carry the male germ cell to the female germ cell from the stigma to the
ovary.
Q11. Explain the structure of flower with the help of a labeled diagram.
Seeds are green leaf like structure. Petals are colourful parts of the flower. Stamens are made
up of filament and anther and are called the male part of the flower. Pistil is known as the female
part of the flower and consists of stigma, style and ovary.
Ans.
1. Only one parent is required. 1. Two organisms, one male and one Female are
involved.
Examples are amoeba, hydra. Examples are fishes, mammals and reptiles.
Q.13. What is the significance of fertilization? Enumerate the method of fertilization as seen in a
flowering plant.
In plants pollination is followed by fertilization. The pollen grains are deposited on stigma and
form tubes called the pollen tubes which grow through the style and reach the ovary. The pollen
tube contains male gamete and the ovary contains ovules which contain the egg or female
gamete. The male gamete fuses with the female gamete to form the zygote which divides and
redivides to form embryo. The ovary develops into fruit and ovules develop into seed.
Ans. Asexual reproduction in amoeba by binary fission. Binary fission is division of one cell into
two similar cells. In this method the nucleus first divides into two, followed by the division of
cytoplasm. The cell finally splits into two daughter cells
Hydra reproduces by budding using the regenerative cells. A bud develops as an outgrowth in
hydra due to repeated cell division at one specific site. When fully mature, the bud detaches
itself from the parent body and develops into independent individuals
Q.15. {a} Draw labeled diagram of the female reproductive system in human beings.
{b }How the sexual mode of reproduction leads to better survival of the species.
{b} As we know in cell division, copy of DNA is having some variation from the original one and
in sexual reproduction germ cells from two different individuals fuses together and thus create
new combination of variants and as the variations are in living individuals, so naturally they are
favourable variations and combination of such favourable variation will provide survival of
species.
Q16. Write the function of the following with respect to the point given below :
(d) Pollen tube develops from the pollen grain which lands on stigma.
Ans:
Heredity:
The transmission of characters (or traits) from the parents to their offspring is called
heredity.
Variation:
The differences in the characteristics (or traits) among the individuals of a species is
called variation.
For example, human height is a trait which shows variation. Another example of variation in
human beings involves ears. The lowest part of the ear is called
earlobe. In most of the people, the earlobe is ‘hanging’ and it is called free earlobe. In
some people, earlobe is closely attached to the side of the head and it is called attached
earlobe.
Genetics: The study of heredity and variation is known as genetics. Heredity is defined as
transmission of characteristics from parents to offspring’s. The differences in characters of
parents and offspring’s is known as variation.
Accumulation of variations:
For example, the accumulation of ‘heat resistant’ variation (or trait) in some bacteria will
ensure its survival even when the temperature in its environment rises too much due to a
heat wave or some other reasons. On the other hand, the bacteria which did not have this
variation to withstand heat would not survive under these circumstances and die.
There are two types of variation- somatic variation and gametic variation.
Somatic variation occurs in the somatic cell of the body. They are not inherited or
transmitted in the next generation. So, they are also known as acquired traits.
Gametic variation occurs in the germ cells of the body. They are inherited in the next
generation. So, they are known as inherited traits.
Importance of variations
The most common causes of variations are mutation, recombination and random mating.
Recombination or crossing over is one of the important reason for variation. It is a exchange
of chromosome segment at the time of gamete formation.
Some important terms:
• Chromosome is a thread-like structure in the nucleus of a cell formed of DNA
which carries the gene.
Genes: Mendel used the term factor for a gene. A gene is a unit of DNA
responsible for inheritance of characteristics from parents to their offspring
during reproduction.
Allele: A pair of genes that control the two alternatives of the same
phenotypic characteristics e.g. tt/TT
Genotype : It is the genetic constitution of an organism which determines the
characters.
Phenotype: The characteristic (or trait) which is visible in an organism is
called its phenotype.
Dominant: The gene which expresses itself in F1 generation is known as
dominant gene.
Recessive: The gene which is unable to express itself in presence of
dominant gene.
Homozygous: The organism in which both the allele of a gene for particular
character are similar. e.g. TT/tt
Heterozygous: The organism in which both the allele of a gene for
particular character are unlike. E.g.
Mendel and his contribution in Genetics
Gregor Mandel was the first scientist to make a systematic study of patterns of
inheritance which involved the transfer of characteristics from parents to progeny.
He did this by using different varitieties of pea plant (Pisum sativum) which he grew
in his garden.
Mendel used a number of contrasting visible characters of garden peas- shape of
seeds ( round and wrinkled), colour of seeds ( yellow and green), height of pea
plants ( tall or dwarf), colour of flowers ( white or violet) and so on.
Mendel chose pea plants for studying inheritance because –
1. Pea plants had a number of clear cut differences which were easy to identify.
2. Pea plants were self-pollinating which enabled them to produce next generation early.
3. Any generations of pea plants can be produced in a comparatively short time span and
their study is much simpler than that of animals.
Hybrid:
A new form of plant resulting from a cross (or breeding) of different varieties of a plant is
known as hybrid.
G.J. Mendel started his work on Pisum sativum (garden pea). He was known as Father of
genetics. He had chosen seven pair of contrasting character-
Monohybrid cross:
When we breed two pea plants having one contrasting characteristic each (of one trait
each) to obtain new plants, then it is called monohybrid cross.
Dihybrid cross:
When we breed two pea plants having two contrasting characteristic each (of two traits
each) to obtain new plants, then it is called dihybrid cross.
Inheriyance is the transmission of genetically controlled characteristics (or traits) from one
generation to the next.
Mendel Laws
Law of Dominance: If the two alleles at a locus differ, then one, the dominant allele,
determines the organism’s appearance; the other, the recessive allele, has no noticeable
effect on the organism’s appearance.
Law of Segregation: The two alleles for a heritable character separate (segregate) during
gamete formation and end up in different gametes.
Mendel first crossed pure-bred tall pea plants with pure-bred dwarf pea plants
and found that only tall pea plants were produced in the first generation or F1
generation.
Mendel concluded that the F1 generation showed the traits of only one of the parent
plants: tallness, which is dominant trait and the other trait which is suppressed by
the dominant trait in f1 generation is called recessive trait that is dwarfness.
Mendel then crossed the tall pea plants of the F1 generation and found that tall
plants and dwarf plants were obtained in the second generation (F2 generation)
in the ratio of 3:1 (three fourth plants were tall and one-fourth plants were dwarf).
Mendel concluded that the dwarf trait of parent pea plant which has seemingly
disappeared in the first generation progeny, reappeared in the second
generation. Mendel also noted that all the pea plants produced from the hybrid,
tall plants of F1 generation were either tall or dwarf, there were no plants with
intermediate height ( or medium height) in-between the tall.
and dwarf plants. so Mendel’s experiments showed that the traits are
inherited independently.
The ratio 3:1 is known as the monohybrid ratio.
When one pair of contrasting characters was taken to cross two pea plants, it is known as
monohybrid cross.
1 is wrinkled green
But the genotypic ratio was found to be 1:2:1: 2:4:2: 1:2:1.
Sex Determination
Sex determination is used to defined the sex of the offspring’s. Environment and genetic
factors determine the sex of the offspring’s. Environment factor includes temperature
such as gender in turtles are determined according to the temperature.
Types of Sex Determination
Different types of sex determination are- XX-XY type (humans), XX-XO type (insects),
ZW-ZZ type (chicken) and ZO-ZZ type (moths and butterflies).
Genetic factors include the presence of sex chromosomes. For example, in humans,
presence of two X chromosomes leads to female offspring whereas presence of one X
and one Y chromosome forms male offspring’s.
In human beings there are 23 pairs of chromosomes. Out of these 22 pair of
chromosomes are known as autosomes whereas 23rd pair of chromosomes are known as
sex chromosomes or allosomes. Sex of the offspring’s is determined by the chromosome
inherited from father.
Mind map-
1 mark Questions
Q1. Genetics is defined as:
Q3. A cross between a tall plant (TT) and short pea plant (TT) resulted in
progeny that were all tall plants because—
a)Boy
b) X-Chromosome does not determine the sex of child.
c) Girl
d) Either boy or girl
Q6. A pregnant woman has an equal chance of her baby being blood group
A or blood group AB. Which one of the following shows the possible
genotypes of the woman and the father of her child?
A. IAIA and IB IO
B. IA IB and IB IO
C. IA IO and IB IO
D. IA IB and IA IO
Q8. Assertion : The great advantage of variation to a species is that it increases the
chance of its survival in a changing environment.
Reason: Heredity is the transmission of characters or traits from parents to
offsprings.
a) (A) is incorrect and (R) is correct
b) (A) is incorrect and (R) is incorrect
c) Both(A) and (R) are correct but(R) is not the correct explanation of (A)
d)Both (A) and (R) are correct and (R) is the correct explanation of (A)
Answer:
1.d 2. b 3. c 4. d 5.c 6.A 7.b 8.c
Q1. Explain with an example, how genes control the characteristics (or traits).
Ans. Genes are the units of heredity i.e. they transfer characteristics from parents to
offspring and determine the characteristics of the offspring.
Example-Transfer of hair color from parents to the offspring. Let’s say that the mother
has dominant genes for black hair, (BB gene constitution) and the father has recessive
gene for blonde hair (bb gene constitution). When fertilization will occur the mother
will transfer one B gene for black hair to the zygote and the father will transfer one b
gene for blonde hair to the zygote. The resulting offspring will have Bb gene for hair
where B is a dominant gene and b is a recessive gene. Since B is dominant it will be
expressed and b will be suppressed, the child will have black hair.
Q2. Gregor Mendel's first law of genetics states "Of a pair of contrasted
characters, only one can be represented in a gamete by its internal 'factor'.
Q3. Why did Mendel choose pea plants for conducting his experiments on
inheritance?
Ans. 1. Short life cycle.
Ans. Mendel’s first law of inheritance is Law of Segregation which states that gene
determines the characteristics/traits of an organism which always occur in pairs. One member
of the gene pair segregates into a gamete.
Mendel’s second law of inheritance is also known as law of independent assortment which
states that in inheritance of more than one pair of traits in a cross simultaneously, the factors
responsible for each pair of traits are distributed independently to the gametes.
Q6. "Only variations that confer an advantage to an individual organism will survive
in a population". Do you agree with this statement? Give reason for your answer.
Ans. Yes; only variations that confer advantage to an individual organism will survive
in a population.
For example- In a population of red beetles, some sudden variation in reproduction
produces a green colored beetle. Red beetles are a easy source of prey as they
can be easily spotted on the green bushes. The green colored beetle that was
produced by a variation could mix up with the green bushes and protect itself from
being a prey to predator. If the variation that has occurred in the color of the beetle
was blue, then it would have been of no advantage to help in surviving, as it would
be easily open to predation like the red beetles.
Q7. A person first crossed pure-bred pea plants having round-yellow seeds with
pure-bred pea plants having wrinkled-green seeds and found that only A-Btype of
seeds were produced in the F1generation. When F1 generation pea plants having
A-B type of seeds were cross-bred by self-pollination, then in addition to the original
round-yellow and wrinkled-green seeds, two new varieties A-D and C-B type of
seeds were also obtained.
(e) Out of A-B and A-D types of seeds, which one will be produced in
(b) A and B are dominant traits since they are Round (R) and yellow (Y)
(c) Round-green
When RrYy obtained in the first generation is self-pollinated, the new varieties
obtained are RY, Ry, rY, ry; where RY- Round yellow, Ry-Round green, rY-Wrinkled
yellow, and ry- wrinkled green. Since A-B type of seed is Round and yellow,
therefore A-D type of seed is Round and Green.
(d) Wrinkled-yellow
When RrYy obtained in the first generation is self-pollinated, the new varieties
obtained are RY, Ry, rY, ry; where RY- Round yellow, Ry-Round green, rY-Wrinkled
yellow, and ry- wrinkled green. Since A-B type of seed is Round and yellow,
therefore C-B type of seed is wrinkled and yellow.
(e) (i) A-D (Round and green ‘Ry’ will be produced in minimum number)
(ii) A-B (Round and yellow ‘RY’ will be produced in maximum number in F2 generation)
CCT Question:
Read the newspaper article and answer the questions that follow.
Without any doubt, if there had been (female) sheep (sheep 2). But first
elections for the animal of the year 1997, he removed from that
Dolly would have been the winner! Dolly is 20 egg-cell all the material that
a Scottish sheep that you see in the would have determined sheep
5 photo. But Dolly is not just a simple sheep. 2 characteristics in a lamb
She is a clone of another sheep. A clone produced from that egg-cell.
means: a copy. Cloning means copying ‘from Ian Wilmut implanted the
a single master copy’. Scientists succeeded manipulated egg- cell of sheep
in creating a sheep (Dolly) that 2 into yet another (female)
10 is identical to a sheep that functioned as a 25 sheep (sheep 3). Sheep 3
‘master copy’. became pregnant and had a
It was the Scottish scientist Ian Wilmut who lamb: Dolly.
designed the ‘copying machine’ for sheep. Some scientists think that within
He took a very small piece from the a few years it will be possible to
clone people as well. But many
15 udder of an adult sheep (sheep 1).
governments have already
From that small piece he removed 30 decided to forbid cloning of people by law.
the nucleus, then he transferred the
nucleus into the egg-cell of another
Q1.Which sheep is Dolly identical to?
A Sheep 1
B Sheep 2
C Sheep 3
D Dolly’s father
Q2. In line 14 the part of the udder that was used is described as “a very
small piece”. From the article text you can work out what is meant by “a
very small piece”.That “very small piece” is :
A. a cell.
B. a gene
C. a cell nucleus
D. a chromosome
Q3. In the last sentence of the article it is stated that many governments
have already decided to forbid cloning of people by law.
Reason: Scientific
?
Cloned people could be more sensitive to certain
diseases than normal people. Yes / No
Answers
Q1. A
Q2. A
Q3. Yes, NO
Ch- 10. Light- Reflection and Refraction
1. Ray of Light : A line drawn in the direction of propagation of light is called a ray of light.
2. Beam of Light : A group of rays of light emitted by a source of light is called a beam of
(i) Parallel beam : A group of light rays parallel to each other is known as parallel beam of
light. 7.
(ii) Divergent beam : A group of light rays spreading out from a source of light is called
(iii) Convergent beam : A group of light rays meeting at a point is called convergent beam 8.
of light.
3. Reflection of Light : There are some surfaces which have ability to send the light back in
the same medium when light strikes it. This 9. phenomena of sending the light back in the
same medium by a surface is called reflection of light.
(i) The incident ray, the reflected ray and the normal at the point of incidence all lie in a same
plane.
(ii) The angle of incidence is always equal to the angle of reflection, ∠i = ∠r.
4. Image : When light rays meet or appear to meet after reflection from a mirror,then it is
called an image.
1. Real Image : It is a kind of image which is formed by actual intersection of light rays after
reflection.
2. Virtual Image : It is a kind of image which is formed by producing the reflected rays
backward after reflection.
5. Plane Mirror : Plane mirror is a piece of glass whose one side is polished by using silver
paint, which is covered by a coating of red paint to protect the silver layer.
6. Spherical Mirrors : It is part of hollow glass sphere whose one surface is polished.
(i) Concave Mirror : It is a spherical mirror whose outer surface is polished and inner or
Principal Focus :
A point on the principal axis of a spherical mirror where the rays of light parallel to the
principal axis meet or appear to meet after reflection from the mirror.
Focal Length :
The distance between the pole (P) and principal focus(F) of a spherical mirror is called the
(i) It is used as a shaving mirror because when it is placed close to the face, it forms a large
image.
(ii) It is used in solar heating devices like solar cooker, because it converges Sun’s rays over a
(i) It is used as rear view mirror in automobiles because it gives erect image as well as
It is a relation between distance of object, distance ofimage from the pole ofthe mirror and
it’sfocal length, i.e., relation between ‘u’, ‘v and It is given by
1/f=1/u+1/v
12. Magnification : It is defined as the ratio of height of image to the height of the object. It is
denoted by letter m.
13. Refraction of Light : The bending of ray of light when it passes from one medium to
another is called refraction of light.
Laws of Refraction :
(i) The incident ray, the refracted ray and the normal at the point of incidence all lie in the
same plane.
(ii) When a ray of light undergoes refraction then the ratio of sine of angle of incidence to the
sine of angle of refraction is constant.
14. The Refractive Index : The refractive index of medium 2 with respect to medium is given
by the ratio of the speed of light in medium 1 and the speed of light in medium 2. This is
usually represented by the symbol n21. This can be expressed in an equation form as
15. Refraction by spherical lenses : Lens is a transparent medium which is formed by joining
two pieces of spherical glass. There are two types of lenses.
(i) Convex Lens : It is a lens which is thicker at the centre and thinner at the edges.
(ii) Concave Lens : It is a lens which is thinner at the centre and thicker at the edges.
Optical Centre of Lens : It is the centre of the lens through which light can pass without
any deviation.
Principal Axis : It is the line passing through optical centre and is perpendicular to the line
joining its edges.
Principal Focus : It is a point on the principal axis where all light rays which are parallel to
principal axis either converge or appear to diverge from, after refraction.
It is also given by v/u i.e., Ratio of distance of image to the distance of object.
19. Power of a lens : A beam of light parallel to principal axis either gets converged or
diverged after refraction by a lens. Some lenses converge the beam of light to a small extent
and some lenses converge it to a large extent. This ability of lens to converge or diverge a
beam of light is known as the power of lens.Si unit of power of lens is dioptre : One dioptre is
the power of a lens whose focal length is 1 m.
If two or more lenses are placed together to form a combined lens then the power of this
combined lens is equal to the sum of the powers of individual lenses.
P = P1 + P2 + P3 + ……
Reflection
1. The incident ray, reflected ray and the normal all lie in the same plane.
Spherical Mirror: If the reflecting surface is part of the hollow sphere then the mirror is a spherical
mirror.
The spherical mirror is of two types:
● Convex mirror: In this mirror reflecting surface is convex. It diverges the light so it is also
called a diverging mirror.
● Concave mirror: In this mirror reflecting surface is concave. It converges the light so it is also
called converging mirror.
Focal length is half the distance between pole and radius of curvature.
F = R/2
(iii) A ray passing through the centre of curvature of a concave mirror or directed in the direction of
the centre of curvature of a convex mirror, after reflection, is reflected back along the same path.
(iv) A ray incident obliquely to the principal axis, towards a point P (pole of the mirror), on the
concave mirror or a convex mirror, is reflected obliquely. The incident and reflected rays follow the
laws of reflection at the point of incidence (point P), making equal angles with the principal axis.
Uses of Concave Mirror: It is used as a makeup mirror, the reflector in torches, in headlights of cars
and searchlights, doctor’s head-mirrors, solar furnace, etc.
● All the distances are measured from the pole of the mirror as the origin.
● Distances measured in the direction of incident rays are taken as positive.
● Distances measured opposite to the direction of incident rays are taken as negative.
● Distances measured upward and perpendicular to the principal axis are taken as positive.
● Distances measured downward and perpendicular to the principal axis are taken as negative.
Mirror formula:
1/v + 1/u = 1/f where ‘u’ is object distance, ‘v’ is the image distance and ‘f’ is the focal length
of spherical mirror
Magnification
The magnification produced by a spherical mirror is the ratio of the height of the image to the height
of the object. It is usually represented as ‘m’.
REFRACTION
Refraction of Light: The bending of light at the interface of two different mediums is called
Refraction of light.
● If the velocity of light in medium is more, then medium is called optical rarer.
Example, air or vacuum is more optical rarer.
● If the velocity of light in medium is less, then medium is called optical denser.
Example, glass is more denser than air.
● The incident ray, the refracted ray and the normal to the interface of two transparent media at
the point of incidence, all lie in the same plane.
● The ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant,
for the light of a given colour and for the given pair of media. This law is also known as
Snell’s law of refraction.
n = sin∠I / sin∠r
Refractive Index: It represents the amount or extent of bending of light when it passes from one
medium to another.
Refractive index of medium 1 with respect to medium 2,
n12=
Absolute Refractive Index.: Refractive index of medium with respect to air or vacuum is called
Absolute Refractive Index.
Lens: The transparent refracting medium bounded by two surfaces in which at least one surface is
curved is called lens.
Lenses are mainly two type
● Convex lens: Spherical lenses formed by binding two spherical surfaces bulging outward are
known as convex lenses
● Concave lens: Spherical lenses formed by binding two spherical surfaces such that they are
curved inward are known as concave lenses
Center of Curvature: The centres of two spheres, of which lens is a part is called the centre of
curvature.
Radii of Curvature: The radii of spheres, of which lens is part is called radius of curvature.
Principal Axis: The line joining the centres of curvature of two surfaces of lens is called principal
axis.
Optical Center: It is a special point on the principal axis. Light incident on the optical centre passes
through the lens without deviation.
Principal Focus: The point on the principal axis at which all incident rays parallel to the principal
axis converge or appear to diverge after refraction through the lens.
(ii) A ray of light passing through the principal focus will emerge parallel to principal axis after
refraction.
(iii) A ray of light passing through the optical center will emerge without any deviation.
(iii) A ray of light passing through the optical centre of a lens will emerge without any deviation.
Magnification:
The linear magnification produced by a lens is defined as the ratio of the size of the image (h’) to the
size of the object (h). It is represented by m i.e.,
m = h’/h = (v/u).
If the magnification of a lens is negative, then the image formed is inverted and real.
If the magnification of a lens is positive, then the image formed is erect and virtual.
The following questions consists of two statements –Assertion (A) and Reason (R). Answer these
questions selecting the appropriate option given below.
a) Both A and R are true and R is the correct explanation for A
b) Both A and R are true and R is not the correct explanation for A
c) A is true but R is false
d) A is false but R is true.
1. Assertion (A). A dentist uses concave mirrors for examining a tooth.
Reason (R). A concave mirror always forms an erect image of an object
2. Assertion (A).The value of focal length in a concave mirror is taken as –ve and in a convex
mirror is taken as +ve.
Reason(R). All distances measured to the right of the origin are taken as +ve and those
measured along the left of the origin are taken as –ve.
3. Assertion (A). The power of a concave lens is positive.
Reason (R). A concave lens forms always forms a virtual image of an object.
4. Assertion (A). Refractive index has no units.
Reason (R). Refractive index is a ratio of two similar units.
3. If a spherical lens has focal length -15 cm , what type of lens is it?
Ans. Concave.
4. An object is kept 60 cm from a converging lens of focal length 20 cm, What is the nature of
the image?
Ans. Real and inverted.
5. Why does a ray of light bend when it travels from one transparent medium into another?
Ans. Its speed changes.
1. What will happen to a ray of light when it falls normally on a surface? Show
diagrammatically.
Ans) No bending of light ray occurs. It goes straight from one medium to another.
1/v=1/f-1/u
m = h’/h = (v/u)
5. At what distance should an object be placed from a convex lens of focal length 18 cm to
obtain an image at 24 cm from it on the other side. What will be the magnification produced in
this case?
Answer.
Ans) Power of lens is inversely proportional to the focal length of the lens.
When focal length of a lens is I metre the power of the lens is said to be 1 dioptre.
Lens with focal length 30cm has more power than lens with focal length 50 cm and hence will
converge the light more.
3 (а) Draw a ray diagram to show the formation of image of an object placed between infinity
and the optical centre of a concave lens.
(b) A concave lens of focal length 15 cm forms an image 10 cm from the lens. Calculate
(i) the distance of the object from the lens.
(ii) the magnification for the image formed.
(iii) the nature of the image formed.
Answer. (a) Image formation when the object is at any position between infinity and optical centre:
4 In an experiment with a rectangular glass slab, a student observed that a ray of light incident
at an angle of 55° with the normal on one face of the slab, after refraction strikes the
opposite face of the slab before emerging out into air making an angle of 40° with the
normal. Draw a labelled diagram to show the path of this ray. What value would you assign
to the angle of refraction and angle of emergence?
1. Answer.
Lenses
Lenses are everywhere in the world around us—in everything from car headlamps and flashlights to
the LED lights used in electronic instrument panels.
Our eyes contain probably the most amazing lenses of all. Think what happens when you look at the
world around you. One minute you're staring at the ground in front of your feet. Seconds later, you
hear an airplane screaming past, turn your head, and watch it fly by. Do this trick with a pair of
binoculars and you'll find it takes you quite a while to adjust the focus from near-sight (looking at the
ground) to far (watching the plane). Try it with the naked eye and you won't even notice what you're
doing. That's because your eyes have flexible lenses, controlled by tiny muscles, that can bulge in and
out, changing shape instantly to focus on anything from the prints on your finger to the surface of the
Moon. How amazing is that?
We all have lenses in our eyes, but many of us balance extra ones on the end of our noses to correct
long and short sight. You'll also find lenses in binoculars (which use two or three lenses in each of the
cylinders serving your eyes) and telescopes, though not all microscopes use them. Ordinary (optical)
microscopes use a series of glass lenses to magnify tiny objects, while super-powerful electron
microscopes use electromagnets to bend electron beams that help us see in even more detail. Movie
projectors and projection televisions use lenses to convert small movie pictures into giant images that
LEDs (light-emitting diodes) used in instrument panels have tiny plastic lenses built into them to
magnify the light they produce. The lens is the curved plastic bit on the left (the top of the LED that
shines toward you.)
Plastics, though lighter, cheap, and easily molded to shape, certainly have their drawbacks: their optical
quality is generally not as good as glass, they scratch very easily, they change their optical properties
more readily than glass as the temperature changes, they don't transmit all light wavelengths as well as
glass, and they don't always bend light as successfully Glass has drawbacks too: its heavy, expensive
and it can shatter
Prism: It is a piece of glass or any transparent material bounded by triangular and three rectangular
surfaces. The rectangular surfaces are called refracting surfaces. The angle between two refracting
surfaces is called refracting angle or angle of prism.
The line along which the two refracting surfaces meet is called refracting the edge. Any
section of prism which is perpendicular to refracting edge is called principal section of
edge.
Difference between refraction through glass prism and glass slab is as follows-
In slab, the emergent ray is parallel to the incident ray but in case of prism, emergent ray is not
parallel to the incident ray because opposite faces of prism eye are not parallel to each other.
When light falls on the prism it splits the incident light into band of colours. The
sequence of colours observed are VIBGYOR (Violet, Indigo, Blue, Green,
Yellow, Orange and Red). This band of colour is known as Spectrum. So, this
splitting of incident light into different colours is known as Dispersion. This
splitting is due to bending of light rays at different angles. Violet light bends most
whereas red light bends least. The phenomenon of rainbow is also due to
dispersion of light.
Fig.3. Dispersion of White Light through Prism
The band of these seven colours formed because of dispersion of light is
known as Spectrum.
Total Internal Reflection
When a light passes from denser to rarer medium and angle of incidence is greater
than critical angle, the light will reflect in the denser medium. This is known as
Total Internal Reflection.
Tyndall Effect
When beam of light strikes tiny water droplets, suspended particles of dust
etc.(called as Colloidal Particles), the path of the beam becomes visible. This is
known as Tyndall Effect. The colour of scattered light depends upon the size of
colloidal particles. Very fine particles scatter mainly blue light while particles of
larger size scatter light of longer wavelengths.
Scattering
The process in which light is transmitted in all directions when it is incident on a particle which
has greater diameter is called scattering. SApplications of Scattering:
i. The sky appears blue: When white light passes through the atmosphere, violet, indigo and blue
colours encounter suspended particles. These waves are absorbed and then scattered and are
received by our eyes.
ii. The sun appears yellow: Violet, indigo and blue colours are scattered in the upper atmosphere,
so the resultant light is yellow. When this light enters our eyes, it appears yellow.
iii. The sky appears dark instead of blue to an astronaut: In space, no particles are present thus,
no scattering occurs. Hence, the sky appears dark.
iv. The smoke coming out of coal fired chimney appears blue on a misty day: The tiny particles of
smoke and moisture scatter blue colour of white light passing through it. When this blue light
reaches our eyes, the smoke appears blue, the sky appears dark instead of blue to an astronaut.
In space, no particles are present, thus, no scattering occurs. Hence, the sky appears dark.
v. The motorists use orange lights rather than normal white light on a foggy day: If the motorist
uses white light while driving in fog, then the tiny droplets of water will scatter a large amount
of blue light. This scattered blue light, on reaching the eyes, will decrease visibility and hence,
driving will become extremely difficult. However, when orange light is used, it doesn’t get
scattered on account of longer wavelength and hence, the driver can see clearly.
Why sky appears red in colour during sunrise and sunset?
----------------------------------------------------------------------------------------------------------------------------
Q2. The change in the focal length of human eye is caused due to
a) Ciliary muscles
b) Pupil
c) Cornea
d) Iris
Q3. The least distance of distinct vision for a young adult with normal vision is
a) 25 m
b) 20 m
c) 25 cm
d) 20 cm
a) 1/10th of a second
b) 1/16th of a second
d) 1/18th of a second
Q5. The light sensitive cells of retina which are sensitive to the intensity of light are—
a) Cones
b) Rods
d) None of these
Q6 Assertion (A): Some persons have the difficulty to see the objects in dim light during night. Reason (R):
This is due to improper functioning of rod-shaped cells which respond to intensify variation in light.
(c) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(d) Both (A) and (R) are correct and (R) is the correct explanation of (A).
Q7. Assertion (A): The colour of the clear sky appears blue.
(c) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(d) Both (A) and (R) are correct but (R) is the correct explanation of (A).
Q8. Assertion (A): The human eye has more field of view.
Reason (R): For a normal eye, the farthest point upto which the eye can see objects clearly is infinity.
(c) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(d) Both (A) and (R) are correct but (R) is the correct explanation of (A).
2 mark questions-
Q1. Complete the following statements :
When the sun is setting, the light from it has to travel a thickness of the earth’s
atmosphere and only…….. wavelength……… light is able to reach us. Sunset is
therefore……….
Ans. greater; longer; red; red
Q2. A student claims that because of atmospheric refraction, the sun can be seen after it has set,
and the day is, therefore, longer than if the earth had no atmosphere.
(a) What does the student mean by saying that the sun can be seen after it has set ?
Ans. a) This means that due to atmospheric refraction we continue to see the sun about two minutes after
the actual sunset. No such atmospheric refraction could have been possible if the earth had no
atmosphere. Hence, the day is longer due to the atmosphere of earth.
b) Yes
Q3. We know that light refracts (or bends) when it goes from one medium to another. Now, the
atmosphere contains only air. Then how does light get refracted on passing through only air in the
atmosphere ?
Ans. The atmosphere only contains air but all the air in the atmosphere is not at the same
temperature. Some of the air layers are cold whereas others are comparatively warm. The cooler air
layers of the atmosphere behave as optically denser medium for the light rays whereas the warmer air
layers behave as optically rarer medium. So, light gets refracted on passing through these layers of air
in the atmosphere.
(a) Q4. What is spectrum ? What is the name of glass shape used to produce a spectrum ?
(b) How many colours are there in a full spectrum of white light ? Write the various colours of spectrum in the
order, starting with red.
Ans.
(a) The band of seven colours formed on a white screen, when a beam of white light is passed through a glass
prism is called spectrum of white light. A glass prism is used to produce a spectrum.
(b) There are seven colours in the spectrum of white light. The colours are Red, Orange, Yellow, Green, Blue, Indigo
and Violet.
Q5. Explain why, if we look at objects through the hot air over a fire, the objects appear to be
moving (or shaking) slightly.
Ans.
The air just above the fire becomes hotter. This hotter air is optically rarer but the colder air further
up is optically denser, so when we see the objects by the light coming from them through hot and
cold air layers having different optical densities, then refraction of light takes place randomly due to
which the objects appear to be moving slightly.
3 mark questions-
Q1. In the figure given alongside, a narrow beam of white light is shown to pass through a
triangular glass prism. After passing through the prism, it produces a spectrum YX on the screen.
(b) Why do different colours of white light bend through different angles with respect to the incident beam of
light ?
Answer-
(a) (i) violet (ii) Red
(b) Different colours of white light bend through different angles because different colours travel through
Ans. a) The refraction of light caused by the earth’s atmosphere is called atmospheric refraction. It is
caused due to the varying optical densities of different layers of earth’s atmosphere.
b) The light coming from a star undergoes atmospheric refraction due to varying optical densities of air at
various altitudes. The continuously changing atmosphere refracts the light from the star by different amounts
from one moment to the next. Thus, the star-light reaching our eyes increases and decreases continuously
and the star appears to twinkle.
c) Planets appear to be quite big to us and can be considered to be a collection of a very large number of point
sources of light. The dimming effect produced by some of the point sources is nullified by brighter effect
produced by some other point sources. Thus, the overall brightness remains the same and the planets
do not appear to twinkle.
Q3. a) Draw a diagram to show the refraction of light through a glass prism. On this diagram, mark
1. incident ray
2. emergent ray, and
3. angle of deviation.
(b) What is a rainbow ? What are the two conditions necessary for the formation of a rainbow in the sky ?
What acts as tiny prisms in the formation of a rainbow ?
(c)
Ans. a)
(b) Rainbow is an arch of seven colours visible in the sky which is produced by the dispersion of sun’s light by
raindrops in the atmosphere. A rainbow is formed in the sky when the sun is shining and it is raining at the
same time.
(c) Raindrops
Q4.When a beam of white light is passed through a prism, it splits to form lights of seven colours.
Is it possible to recombine the lights of seven colours to obtain the white light again ? Explain your
answer.
Ans.
Yes, it is possible to recombine the lights of seven colours to obtain the white light again by
placing another similar prism alongside the first one in the inverted position as shown below. The
first prism disperses the white light into seven coloured rays. the second prism receives all the
seven coloured rays from the first prism and recombines them into original white light. This is
because the refration produced by the second prism is equal and opposite to that produced by
the first prism.
CCT Question-
Q. In an experiment(as shown above) to study the scattering of light by passing a beam of white
light through a colloidal solution of sulphur in a transparent glass tank :
(a) Which colour is observed from the front of the glass tank ? Does this colour correspond to the colour of
sky on a clear day or the colour of sky around the sun at sunset ?
(b) Which colour is observed from the sides of the glass tank ? Does this colour correspond to the colour of
sky on a clear day or the colour of sky around the sun at sunset ?
(c) Why are the ‘danger signal’ lights red in colour ?
Ans.
(a) Red colour is observed from the front of the glass tank. This colour corresponds to the colour of sky
clear day.
(c) ‘Danger’ signls are red in colour because the red coloured light having longer wavelength
is the least scattered by fog or smoke particles. Due to this the red light can be seen in the same
colour even from a distance.
CH 12 ELECTRICITY
GIST OF THE LESSON
1. Positive and negative charges: The charge acquired by a glass rod when rubbed
with silk is called positive charge and the charge acquired by an ebonite rod when
rubbed with wool is called negative charge.
2. Coulomb: It is the S.I. unit of charge. One coulomb is defined as that amount of
charge which repels an equal and similar charge with a force of 9 x 10 9 N when
placed in vacuum at a distance of 1 meter from it.Charge on an electron = -1.6 x 10-19
coulomb.
3. Static and current electricity: Static electricity deals with the electric charges at
rest while the current electricity deals with the electric charges in motion.
7. Ampere: It is the S.I. unit of current. If one coulomb of charge flows through any
section of a conductor in one second, then current through it is said to be one
ampere.
1 ampere = 1 coulomb/1 second or 1A=
1C/1s = 1Cs 1 milliampere = 1 mA = 10-3 A
-1
13. One volt potential difference: The Potential difference between two points in an
electric field is said to one volt if one joule of work has to be done in bringing a
positive charge of one coulomb from one point to another.
1 volt = 1 joule/1 coulomb or 1 V = 1J/1C
17. Ohm’s law: This law states that the current passing through a conductor is
directly proportional to the potential difference cross its ends, provided the
physical conditions like temperature, density etc. remains unchanged.
V α I or V = RI
The proportionality constant R is called resistance of conductor.
19. Ohm: It is the S.I. unit of resistance. A conductor has a resistance of one ohm if a
current of one ampere flows through it on applying a potential difference of one volt
across its ends.
1 ohm = 1 volt/1 ampere or 1Ω = 1V/1A
25. Joule’s law of heating: It states that the heat produced in a conductor is directly
proportional to (i) the square of the current I through it (ii) proportional to its
resistances R and
(i) the time t for which current is passed. Mathematically, it can be
expressed as H = I2Rt joule = I2Rt/4.18 cal
or
H = VIt joule = VIt/4.18cal
26. Electric energy: It is the total work done in maintaining an electric current in an
electric circuit for given time.
Electric energy, W = VIt = I2Rt joule
27. Electrical power: Electrical power is the rate at which electric energy is
consumed by an appliance.
P = W/t = VI = I2R = V2/R
28. Watt: It is the S.I. unit of power. The power of an appliance is 1 watt if one ampere of
current flows through it on applying a potential difference of 1 volt across its ends.
1 watt = 1 joule/1 second =1 volt x 1 ampere
or 1 W = 1 Js-1 = 1 VA
1 kilowatt = 1000 W
MIND MAP
Ch 12 ELECTRICITY
One-mark Questions
(2) Mention one reason why tungsten is used for making filament of electric lamp
Ans Tungsten is used for making filament because of its high melting point and
Low Resistivity.
(3) Draw a schematic diagram of a circuit consisting of a cell of 1.5 V, 10 ohm resistor and 15 ohm
resistor and a plug key all connected in series
Ans Circuit diagram
(4) State a difference between the wire used in the element of an electric heater and in a fuse
wire.
Ans The wire used in element of electric heater has high resistance and high melting point where as
a fuse wire has a low resistance and low melting point
(5) Name a device that helps to maintain a potential difference across a conductor.
Answer. Cell or battery
(6) . What happens to resistance of a conductor when its area of cross-section is increased?
(7) How is a voltmeter connected in the circuit to measure the potential difference between two
Points?
Ans The minimum potential difference measured by a voltmeter between the two given terminals is
called the least of count that voltmeter
(1) The amount of charge passing through a cell in four second is 12 C. Find the current supplied by
cell
Ans Given t= 4 s q=12 C
I=q/t
I=12/4
I=4 Ampere
(2) Name the device/instruments used to measure potential difference. How is it connected in an
electric circuit?
Ans : The device which is used to measure potential difference is voltmeter. Voltmeter is
connected in parallel in an electric circuit.
1µA=10-6 Ampere
b. Why do we use copper and aluminium wires for transmission of electric current?
Ans a. Tungsten is used in making the filament of electric lamp because it has
b. The copper and aluminium have low resistivity and high conductivity
(5) List in a tabular form two differences between a voltmeter and an ammeter.
Ans :
Voltmeter Ammeter
(6) Mention two special features of the material to be used as element of an electic iron
Ans : A material to be used as element of an electric iron must have
(7) A large number of free electrons are present in metals yet no current flows in the absence of
electric potential across it. Explain the statement with reason.
Ans : Though there are large number of free electron present in a conductor, but their motion
is random motion in the absence of potential difference. Their average velocity is zero. Hence
there is no current flowing in conductor. But when a potential difference is applied across the
ends of the conductor, it sets the electrons to move in a direction. The motion of charge
produces an electric current in the conductor.
(8) Explain two disadvantage of series arrangement for house hold circuit
Ans (1) In series circuit ,if one electrical appliance stop working due to some defect then all other
appliances also stop working because the whole circuit is broken.
(2) In series circuit, all the electrical appliances have only one switch due to which they
cannot be turned off or turned on separately
(9) Out of the two wires X and Y shown below. Which one has greater resistance.
(10) How would the reading of voltmeter (V) change, if it is connected between B and C? Justify
your answer
R=R1+R2+R3 R=1+2+3
R= 6 Ohm I=3/6
Three Marks
(1) (a) Write two points of difference between electric energy and electric power. (6) Out of 60 W and
40 W lamps, which one has higher electrical resistance when in use.
(c) What is the commercial unit of electric energy? Convert it into joules. Answer. (a) Difference
between electric energy and electric power:
(ii) It is equal to the product of power (ii) It is equal to the rate of doing
and time i.e. E = P × t work by an energy source
P=W/t
(iii) Its SI unit is joule (J) (iii) Its SI unit is watt (W)
i.e. less the power of electrical device, higher is its electrical resistance.
Answer.
(a) Electric power: It is the rate of doing work by an energy source or the rate at which energy is
dissipated or consumed per unit time in the electric circuit is called electric
Power
(b) It means, the maximum current will flow through it is only 2 A. Fuse wire will melt if the current
exceeds 2 A value through it.
(3). What is meant by electric current? Name and define its SI unit. In a conductor electrons are
flowing from B to A. What is the direction of conventional current? Give justification for
your answer. A steady current of 1 ampere flows through a conductor. Calculate the
number of electrons that flows through any section of the conductor in 1 second. (Charge on
electron 1.6 X 10-19 coulomb).
Answer.
Electric Current: The amount of charge ‘Q’ flowing through a particular area of cross section
in unit time ‘t’ is called electric current, i.e.
One ampere of current is that current which flow when one coulomb of electric charge
flowing through a particular area of cross-section of the conductor in one second, i.e. 1A = 1 Cs-1.
electrons. In a metal, flow of electrons carrying negative charge constitutes the current.
Direction of flow of electrons gives the direction of electronic current by convention, the
direction of flow of positive charge is taken as the direction of conventional current.
Five marks Questions
. Draw a labelled circuit diagram showing three resistors R1, R2 and R3 connected in series with a
battery (E), a rheostat (Rh), a plug key (K) and an ammeter (A) using standard circuit symbol. Use this
circuit to show that the same current flows through every part of the circuit. List two precautions you
would observe while performing the experiment.
Answer
Aim: Same current flows through every part of the above circuit.
Procedure:
Connect ammeters, ‘A’1 between B and C, and ‘A2’ between D and E A djust the sliding contact of the
rheostat initially for a small current. Note all the ammeter readings. These reading give us current flowing
through the resistors R1, R2 and R3
The current in the circuit is now increased by changing the position of sliding contact J’ of the rheostat.
Note all the ammeter readings each time.
Conclusion: Same reading of all the ammeter in each observation concluded that same current flows
through every part of the circuit.
Precautions:
All the connection should be tight and properly connected as per circuit diagram.
The positive terminal of the ammeter and voltmeter must be connected to the positive terminal of the
battery or battery eliminator
(2) State Ohm’s law. Write the necessary conditions for its validity. How is this law verified
experimentally? What will be the nature of graph between potential difference and current for a
conductor? Name the physical quantity that can be obtained from this graph.
Answer. Ohm’s law: When the physical conditions such as temperature etc. remain same, the current
flowing through the conductor is directly proportional to the potential difference applied across the ends
of the conductor, i.e.,
3. Note down the potential difference (V) across the conductor PQ of resistance R shown by the
voltmeter and the corresponding current (I) shown by the ammeter.
4. Now move the knob of rheostat so that the current in the circuit increases.
5. Again note down the potential difference (V) across the conductor R in the voltmeter and current in the
circuit shown by ammeter.
6. Repeat the experiment five times by increasing the current in the circuit by moving the knob of the
rheostat in steps.
Plot a graph between V and I by taking V along X- axis along. We get a straight line passing through
origion
T
Conclusion : From the graph between V and I, we conclude that I = V, which is Ohm's law. Hence
Ohm's law is verified.
Ohm's law does not hold under all conditions. Ohm's law does not hold for non-ohmic material such as
electrolyte
(3) .Two devices of rating 44 W, 220 V and 11 W, 220 V are connected in series. Thecombination is
connected across a 440 V mains. The fuse of which of the two devices is likely to burn when the
switch is ON? Justify your answer
(5) Assertion : Alloys are commonly used in electrical heating devices, like electrical iron, toasters
etc.
Reason : Alloys do not oxidise (burn) readily at high temperatures.
Ans : (a) Both assertion (A) and reason (R) are true and reason (R) is the correct explanation of
assertion(A).
OBJECTIVE QUESTIONS
(1) Two unequal resistances are connected in parallel. Which of the following statement is
true?
(a) current in same in both
(b) current is larger in higher resistance
(c) voltage-drop is same across both
(d) voltage-drop is lower in lower resistance
Ans : (c) voltage-drop is same across both
(3) A cylindrical rod is reformed to twice its length with no change in its volume. If the
resistance of the rod was R, the new resistance will be
(a) R (b) 2R
(c) 4R (d) 8 Ans : (c) 4R
(4) 100 J of heat is produced each second in a 4 W resistance. The potential difference across
the resistor is
(a) 20 V (b) 10 V
(c) 5 V (d) 15 V Ans : (a) 20 V
(5) A wire of resistance R is cut into ten equal parts which are then joined in parallel. The
New resistance will be
(a) 0.01 R (b) 0.1 R
(c) 10 R (d) 100 R Ans (a) 0.01 R
(6) Two bulbs have the following ratings:
(a)40 W, 200 V . (2) 20 W, 100 V
The ratio of their resistance is
(a)1 :2 (b) 2 : 1
(c) 1:1 (d) 1 : 3 Ans : (b) 2 : 1
(7) An electric kettle consumes 1 kW of electric power when operated at 220 V. A fuse wire of
what rating must be used for it?
(a) 1 A (b) 2 A
(c) 4 A (d) 4.5 A Ans : (d) 5 A
(8) The length of a wire is doubled. By what factor does the resistance change
(a) 4 time as large (b) twice as large
(c) unchanged (d) half as large Ans : (d) half as large
(9) The resistivity does not change if
(a) the material is changed (b) the temperature is changed
(c) the shape of resistor is changed (d) both material and temperature is are changed
Ans ( c) the shape of the resistor is changed
Ans : (a) 1
Answer i) c ii) b iii) b iv) a v) d
Electrical resistivity and resistance
Electrical resistivity and its inverse, electrical conductivity are fundamental properties of a
material that quantifies how strongly it resists or conducts electric current. A low resistivity
indicates a material that readily allows electric current to flow.
Resistance is defined as the ratio of potential difference across a conductor to the current
passing through it. Resistance is the property of a conductor to resist the flow of charges
through it.
Both resistance and resistivity describe how difficult it is to make electrical current flow
through a
material, but unlike resistance, resistivity is an intrinsic property. This means that all pure
copper wires
irrespective of their shape and size, have the same resistivity, but a long, thin copper wire
has a much
larger resistance than a thick, short copper wire. Every material has its own characteristic
resistivity. For
example, rubber has a far larger resistivity than copper. Resistivity of metals also varies
with temperature.
The resistance of almost all alloys increases with increase in temperature but the rate
of change of resistance is less than that of metals. In fact, the resistance of certain alloys
such as Manganin, Eureka, and Constantan show practically no change in resistance to a
considerable range of temperature.
i) It is expensive
ii) It oxidizes and tarnishes when it comes in contact with air. iii) Its resistivity decreases
with increase in temperature
a) Only (i)
b) Only (ii)
c) Both (i) and (ii)
d) Only (iii)
Question 3:- The area of cross section of a wire becomes half when its length is stretched
to double. How the resistance of the wire is affected in the new condition?
______________________________________________________________________
_________________________________________________________
_ Question 4:- The resistivity does not change if
(a) the material is changed
(b) the temperature is changed
(c) the shape of the resistor is changed
(d) both material and temperature are changed
Answer1. D
2. C
3. Volume of the wire remains the same before and after stretching. Assuming wire to be
cylindrical in shape then volume Area of base x height/ length due to stretching if length is
increased area will decrease.
R = ρl/A
New length =2l
New Area = A/2
Resistance increases four times.
4. C
Answer
CHAPTER 13. MAGNETIC EFFECTS OF ELECTRIC CURRENT
KEY CONCEPTS & GIST OF THE LESSON
Magnet: (i) is an object that attracts objects made of iron, cobalt &
nickel.
(ii) Comes to rest in North-South direction, when suspended freely.
Magnets are used: (i) In radio & stereo speakers, (ii) In refrigerator
doors, (iii) on audio & video cassettes players, (iv) On hard discs &
floppies of computers & (v) in children‘s toys.
Solenoid:
1. State the observation made by Oersted on the basis of his experiment with
current carrying conductors.
Answer. The electric current passing through a conducting wire produces magnetic
effect.
Answer. Both the poles facing each other represent south pole in nature as the
magnetic field lines outside the magnet move from North to South Poles.
5.How can you show that the magnetic field produced by a given electric
current in the wire decreases as the distance from the wire increases?
Answer. The decrease in deflection of the magnetic compass needle clearly shows
that the magnetic field decreases as we move away from the current-carrying
conductor.
6. A current carrying straight wire held perpendicular to the plane of paper and
current passes through this conductor in the vertically upward direction. What
is the direction of magnetic field produced around it?
Answer. According to right-hand thumb rule, the direction of magnetic field produced
around the given conductor is anticlockwise.
7. If the circular coil has n turns, the field produced is n times as large as that
produced by a single turn. Justify it.
Answer. This is because the current in each circular turn has the same direction, and
the field due to each turn then just adds up along the axis of the coil.
Answer. Using Fleming’s left hand rule, the nature of charged particle is positive.
Each of these questions contain two statements, Assertion (A) and Reason (R). Each
of these questions also has four alternative choices, only one of which is the correct
answer. You have to select one of the codes (a), (b), (c) and (d) given below.
Reason: The force acting on a current carrying conductor in a magnetic field is due
to interaction between magnetic fields produced by the conductor and external
magnetic field.
Ans : A
2. Assertion: In Fleming’s left hand rule, the direction of magnetic field, magnetic
force and current are mutually perpendicular.
Reason: Fleming’s left hand rule is applied to measure the induced current.
Ans : C
3. Assertion: Magnetic field produced by a current carrying solenoid is independent
of cross sectional area.
Ans: B
Ans: A
Ans : D
6. Assertion: Magnetic Field due to a current carrying coil at its centre becomes
double if current in the coil is doubled.
Reason: Magnetic Field due to a current carrying coil at its centre is directly
proportional to the current.
Ans : A
Ans B
Magnetic field lines are imaginary lines. Magnetic field lines are a visual tool used to
represent magnetic fields. They describe the direction of the magnetic force on a
north monopole at any given position. The density of the lines indicates the
magnitude of the field.
(1) Concept of Field lines was introduced by
(a) Direction of Magnetic field (b) direction of electric field (c) direction of both
(d) none of the above.
(a) Far Apart (b) Crowded (c) Parallel (d) may be crowded or distant
(4) A magnet:
(a) can have no poles (b) must have two poles (c) may have only North Pole (d)
may have only North Pole
Magnetic Resonance Imaging (MRI) uses significant magnetic field of Heart and
Brain and other parts inside human body for obtaining the images of different body
parts. These images helps in medical diagnosis. Magnetism has, thus, got important
uses in medicine.
.
(1) Magnetic field in the human body is …………than Earth’s magnetic field
(3) Which rule is used to find direction of magnetic force on a charge particle moving
in magnetic field normal to its direction
(a) Fleming’s Right hand Rule (b) Fleming’s Left Hand Rule
(c) Right Hand Thmb Rule (d) both (b) and (c)
(a) Vector (b) Scalar (c) Tensor (d) both (a0 and (b)
(a) bar Magnet (b) horse shoe magnet (c) Electric Field (d) all of the above
3. Electric Motor:
(a) electric fans (b) refrigerators (c) mixers (d) all of the above
(a) Permanent magnet (b) Electro magnet (c) both (a) and (b) (d) none of the
above.
(a) Fleming’s left hand rule (b) Fleming’s right hand rule
Answer.
(i) Maximum strength – at A and C
At A and C, magnetic field lines are crowded while at B, they are spread out.
Reason: The strength of magnetic field reduces with the increase in distance from
the wire.
3. Magnetic field lines of two magnets are shown in fig. A and fig. B.
Select the figure that represents the correct pattern of field lines. Give reasons
for your answer. Also name the poles of the magnets facing each other.
Answer. Figure B represents the correct pattern of field lines. In figure A, field lines
cross each other which is not possible because if they cross each other, at the point
of intersection, there would be two directions of field lines.
In figure B, field lines are emerging in nature, so poles of magnet facing each other
are north poles while opposite faces will have south polarity.
4.Identify the poles of the magnet in the given figure (1) and (2).
Answer. Field lines emerge from north pole (N) and merge at the south pole (S) as
shown in both the figures
6.Two circular coils A and B are placed close to each other. If the current in the
coil A is changed, will some current be induced in the coil B? Give reason.
Answer. Yes, when a current in coil A changes, magnetic field lines linked with coil B
also change. Hence, due to change in number of magnetic field lines, there is an
induced current in coil B.
(ii) Larger deflection in opposite direction as compared to the case (i) will be seen.
(Hi) No deflection.
The phenomenon involved is electromagnetic induction.
8. Two coils A and B of insulated wires are kept close to each other. Coil A is
connected to a galvanometer while coil B is connected to a battery through a
key. What would happen if
(i) a current is passed through coil B by plugging the key, and (ii) the current is
stopped by removing the plug from the key?
Explain your answer mentioning the name of the phenomenon involved.
Answer.In both the given cases, galvanometer shows momentary deflection but in
opposite direction. In coil A, magnetic field lines [increased in case (i) and decreased
in case (ii)] induce a potential difference across the coil A which sets up induced
electric current in coil A. It is shown by the deflection in galvanometer. This is known
as electromagnetic induction.
9. Why and when does a current carrying conductor kept in a magnetic field
experience force? List the factors on which direction of this force depends?
Answer. The drifting of free electrons of a conductor in a definite direction causes the
current to flow through it. When such conductor is placed in a uniform magnetic field,
each drifted electron of a conductor experience a magnetic force. This force is
collectively experience by a conductor as a whole. Hence a current carrying
conductor kept in a magnetic field experience a force. The direction of magnetic force
depends on
(i) direction of current through the conductor, and
(ii) direction of magnetic field.
6.The direction of electric current passed through a vertical wire and through a
horizontal card is shown below:
Sketch the pattern of the magnetic field on the card around the wire. Indicate
the direction of the magnetic field at any one point. How would you check this
direction experimentally? Answer. The pattern of magnetic field lines on the card
around the current carrying conductor for the downward direction of current is shown.
They are concentric in circle with their centre lies on the axis of wire. Direction:
7. What is meant by solenoid? How does a current carrying solenoid behave?
Give its main use.
Answer. Solenoid: A coil of many circular turns of insulated copper wire wound on a
cylindrical insulating body (i.e., cardboard etc.) such that its length is greater than its
diameter is called solenoid.
When current is flowing through the solenoid, the magnetic field line pattern
resembles exactly with those of a bar magnet with the fixed polarity,
i.e. North and South pole at its ends and it acquires the directive and attractive
properties similar to bar magnet. Hence, the current carrying solenoid behave as a
bar magnet.
Use of current carrying solenoid: It is used to form a temporary magnet called
electromagnet as well as permanent magnet.
8. For the current carrying solenoid as shown below, draw magnetic field lines
and giving reason explain that out of the three points A, B and C at which point
the field strength is maximum and at which point it is minimum.
Answer. Outside the solenoid magnetic field is minimum. At the ends of solenoid,
magnetic field strength is half to that inside it. So Minimum – at point B; Maximum –
at point A
9. a) Draw a diagram to represent a uniform magnetic field in a given region.
(b) List two properties of magnetic field lines.
Answer.
(a) Equidistant parallel line indicates a uniform magnetic field in a given region.
(b) Properties of magnetic field lines are:
The magnetic field lines of a magnet form continuous closed loops, i.e. outside the
magnet, they emerge from north pole and merge at the south pole and inside the
magnet, the direction of field lines is from its south pole to its north pole.
The degree of closeness of field lines indicates the strength of magnetic field.
Field lines never cross each other.
10. What are magnetic field lines? Justify the following statements
(a) Two magnetic field lines never intersect each other.
(b) Magnetic field lines are closed curves.
Magnetic field lines: It is defined as the path along which the unit North pole
(imaginary) tends to move in a magnetic field if free to do so.
(a) The magnetic lines of force do not intersect (or cross) one another. If they do so
then at the point of intersection, two tangents can be drawn at that point which
indicates that there will be two different directions of the same magnetic which field,
i.e. the compass needle points in two different directions which is not possible.
(b) Magnetic field lines are closed continuous curves. They diverge from the north
pole of a bar magnet and converge its south pole. Inside the magnet they move from
south pole to north pole.
It states that if we hold the current carrying-conductor in the right hand in such a way
that the thumb is stretched along the direction of current, then the curly finger around
the conductor represent the direction of magnetic field produced by it. This is known
as right-hand thumb rule.
Direction of Field Lines due to current carrying straight conductor is as shown in
figure.
(c) Solenoid.
2. Two coils C1 and C2are wrapped around a non conducting cylinder. Coil
C1is connected to a battery and key and C2 with galvanometer G. On pressing
the key (K), current starts flowing in the coil C1State your observation in the
galvanometer:
3. Two coils of insulated copper wire are wound over a non -conducting
cylinder as shown. Coil I has larger number of turns.
(i) Write your observations when,
(a) key K is closed,
(b) key K is opened.
ii) Plug the key, the current flowing through the rod from Q to P observe the
displacement of rod.
iii) Now unplug the key and remove the first horse shoe magnet and place the second
horse shoe magnet of higher magnetic field strength in a similar manner to that of
first.
iv) Plug the key, the current again flow through the rod from Q to P. Again observe
the deflection of rod.
v) Now bring both’the magnet closer together (to ensure greater magnetic field than
that of previous case). Again observe the motion of rod.
Observations : Each time, the conductor moves faster than that of previous one. It is
possible only when conductor gets accelerated more each time which required more
force. (F = ma) Thus, if the magnetic field strength is increased, the rod will
experience a greater force and move faster.
Conclusion : The force acting on a current carrying conductor placed in a magnetic
field increases with increase in field strength.
Working: Current in the coil ABCD enters from the source battery through
conducting brush
X and flows back to the battery through brush Y. Using Flemimg’s left Hand rule We
find that the force acting on arm AB pushes it downwards while the force acting on
arm CD pushes it upwards. Thus the coil and the axle O, mounted free to turn about
an axis, rotate anti-clockwise. At half rotation, Q makes contact with the brush X and
P with brush Y. Therefore the current in
the coil gets reversed and flows along the path DCBA. A device that reverses the
direction of flow of current through a circuit is called a commutator. In electric motors,
the split ring acts as a commutator. The reversal of current also reverses the direction
of force acting on the two
arms AB and CD. Thus the arm AB of the coil that was earlier pushed down is now
pushed up and the arm CD previously pushed up is now pushed down. Therefore,
the coil and the axle rotate half a turn more in the same direction. The reversing of
the current is repeated at each half
rotation, giving rise to a continuous rotation of the coil and to the axle.
Diagram:
CH 15: OUR ENVIRONMENT
3. Why is ozone layer getting depleted at the higher levels of the atmosphere?
Answer. Ozone layer is getting depleted at the higher levels of the atmosphere due
to effect of chlorofluorocarbons (CFCs) which are used as refrigerants and in fire
extinguishers.
8. What will happen if we kill all the organisms in one trophic level?
Answer. If we kill all the organisms in one trophic level, the following effects will take
place:
10. Which compounds are responsible for the depletion of ozone layer?
Answer. The compounds responsible for the depletion of ozone layer are
chlorofluorocarbons (CFCs).
11. Define ‘trophic level’.
Answer. Trophic level is the position that an organism occupies in a food chain,
where transfer of food or energy takes place.
18. What step is being taken to limit the damage to the ozone layer?
Answer.1.Judicious use of aerosol sprays propellants such as fluorocarbon and
chlorofluorocarbons which cause depletion or hole in ozone layer.
2. Control over large scale nuclear explosions and limited use of supersonic planes.
20. Which class of chemicals is linked to the decrease in the amount of ozone
in the upper atmosphere of the earth?
Answer. The chemical compound Chlorofluorocarbon is responsible for decrease of
ozone in the upper atmosphere of the earth.
23. What happens when higher energy ultraviolet radiations act on the oxygen
at the higher level of the atmosphere?
Answer. When high energy ultraviolet radiations act on oxygen, ozone is produced:
24. In a food chain, 10,000 joules of energy is available to the producer. How
much energy will be available to the secondary consumer to transfer it to the
tertiary consumer?
Answer. 10 J will be available to the secondary consumer to transfer to the tertiary
consumer.
25. Write the name and formula of a molecule made up of three atoms of
oxygen.
Answer. Ozone and its chemical formula is O3.
27. Consider the following food chain which occurs in a forest: Grass -> Deer -
> Lion
If 10000 J of solar energy is available to the grass, how much energy would be
available to the deer to transfer it to the lion?
Answer. 10 J energy would be available to deer to transfer to lion.
28. Which of the following belong to the first trophic level of a food chain?
Grass, Grasshopper, Plants, Rat, Tiger
Answer. Grass and plants belong to the 1st trophic level of a food chain.
2. Why are bacteria and fungi called decomposers? List any two advantages of
decomposers to the environment.
Answer. Bacteria and fungi breakdown the dead remains and waste products of
organisms. These microorganisms are called the decomposers as they breakdown
the complex organic substances into simple inorganic substances that go into the soil
and are used up once more by the plants.
Two advantages of decomposers to the environment are as follows:
1. Decomposers feed, on the dead bodies of plants and animals. They return the
simple components to soil and help in making the steady state of ecosystem by
recycling of nutrients. They, therefore, create a balance in the environment.
2. They also act as scavengers or cleansing agents of the atmosphere.